User's Manual

ManualsBrandsCaterpillar ManualsElectronicsCaterpillar MSS3s RFID Key Reader Module

Illustration 30 g03866154

Typical ET screen for Security Management

2. Press the “Print Preview” icon in the menu bar and

then press “OK” . The “Print Preview Screen” is

displayed. Choose the appropriate push button to

aid in viewing the document. “Print” prints the

report to the printer. “Next Page” views the next

page of the report. “Next Page” is disabled if you

are on the last page of the report. “Prev Page”

views the previous page of the report. “Prev Page”

is disabled if you are on the first page of the report.

“Two Page” displays two pages of the report.

“Zoom In” magnifies the text. “Zoom In” is disabled

when the text is fully magnified. “Zoom Out”

decreases the size of the text. “Zoom Out” is

disabled when the text is at normal size. “Close”

will exit the preview.

““Fleet/Key Configuration””

The “Fleet/Key Configuration” function allows you to

configure and manage a Machine Security System

(MSS) enabled machine or set of machines easily.

The function allows you to program, load, and save a

set of configuration parameters and key information.

The information can be loaded from or programmed

to the MSS. This information can also be saved to or

loaded from a file.

Once a file is saved in “Fleet/Key Configuration” , File

Management can be used to export the file as a *.

MSS file. The exported *.MSS file can then be

imported into the MSS Key Management Software

program, for management of the “Fleet/Key”

information.

70 UENR7061

Testing and Adjusting

Summary of content (11 pages)

PAGE 1
70 Testing and Adjusting UENR7061 Illustration 30 g03866154 Typical ET screen for Security Management 2. Press the “Print Preview” icon in the menu bar and then press “OK” . The “Print Preview Screen” is displayed. Choose the appropriate push button to aid in viewing the document. “Print” prints the report to the printer. “Next Page” views the next page of the report. “Next Page” is disabled if you are on the last page of the report. “Prev Page” views the previous page of the report.
PAGE 2
UENR7061 Loading Data from the ECM 1. Connect the service tool to the Machine Security System ECM that you want to copy. 2. Select “Copy Configuration” from the “Service” menu, and then select “Fleet/Key Configuration” from the submenu. Note: Changing the “Fleet/Key Configuration” requires a key with master access level or a factory password. 3. If there is no recently loaded data available, the “No data is available...” message box will display. 4. Press “Yes” to load data from the ECM.
PAGE 3
72 Testing and Adjusting Illustration 31 2. Enter a document name and description in the appropriate text boxes. Press the “OK” button. The “Fleet/Key Configuration saved successfully” message box displays. Press the “Cancel” push button to exit the “Print New Document To File” dialog box without saving the file. You will return to the “Fleet Configuration” dialog box. 3. Press “OK” to return to the “Fleet/Key Configuration” screen. Loading Data from a File 1.
PAGE 4
UENR7061 Illustration 32 73 Testing and Adjusting g03866163 Save-As Screen 6. From the “File Management” dialog box, highlight the file from the “Files” list box. Then highlight the “Fleet/Key Configuration document” that you want to load from the “Documents” list box. 7. Open the document. As the data loads, a progress bar displays. Then, the “Fleet Configuration” message box displays. 8. Press “OK” . The “Fleet/Key Configuration” screen displays with the file data.
PAGE 5
74 UENR7061 Testing and Adjusting Illustration 33 ECM Screen 2. Highlight an ECM and press “OK” The “Please wait” message box displays. Then the “Testing ECM” progress bar displays. Note: You can cancel the uploading process at any time, by pressing the “Cancel” push button. The “Are you sure...” message box displays. Press “Yes” to cancel uploading the data or “No” not to cancel. Refer to the following procedures when you “Append” or “Replace” the key list.
PAGE 6
UENR7061 75 Testing and Adjusting Illustration 34 g03866178 Copy Configuration, Service Menu, Fleet/Key Configuration 3. Select “Copy Configuration” from the “Service” menu, and then select “Fleet/Key Configuration” from the submenu. 4. Open the document. As the data loads, a progress bar displays. Then, the “Fleet Configuration” message box displays. 5. Press “OK” . The “Fleet/Key Configuration” screen displays with the file data. 6. Click on the “Program ECM” button.
PAGE 7
6 Testing and Adjusting UENR7061 7. Click on the “Append” button. Illustration 36 g01097413 8. Click on the “Yes” button if you are prompted. When the data has been successfully uploaded, the “Programming complete.” message box displays. Press “OK” Note: MSS can store a maximum number of 255 keys at one time. “Fleet/Key Configuration” determines the number of keys slots not programmed on the MSS. You cannot program more keys than the maximum number allowed.
PAGE 8
UENR7061 77 Testing and Adjusting Illustration 37 Copy Configuration, Service Menu 3. Select “Copy Configuration” from the “Service” menu, and then select “Fleet/Key Configuration” from the submenu. 4. From the “File Management” dialog box, highlight the file from the “Files” list box. Then highlight the “Fleet/Key Configuration document” that you want to load from the “Documents” list box. 5. Open the document. As the data loads, a progress bar displays.
PAGE 9
78 Testing and Adjusting UENR7061 Illustration 38 g03866190 Replace 8. Click on the “Replace” button. STOP. i06227236 System Disarm - Program (Security System Bypass) SMCS Code: 7631-591 Use the following procedure to change the Activation Periods of the Security System Bypass: Note: Changing the MSS Bypass times requires you to use a key with master access level or a factory password. Illustration 39 g01097413 9. Click on the “No” button if you are prompted.
PAGE 10
UENR7061 79 Testing and Adjusting Illustration 40 g03866205 Typical ET screen 3. Highlight the “Security System Bypass Start Time” for the day that you want to set up. Press the “Change” push button at the bottom of the page. This button will bring up the “Change Parameter Value” screen. 4. Enter the desired “start time” in the space that is provided. Then click the “OK” button. All times are based on a 24 hour clock. If you want the desired start time to be 6:00 am, then enter 06:00.
PAGE 11
80 Testing and Adjusting UENR7061 Internet 1. The Factory Password System (FPS) is a secure web site and a password is required. Proceed to step 1.a if you do not have a “Login ID” and a “Password” . Proceed to step 2 if you already have a “Login ID” and a “Password” . a. Refer to the “Telephone Help Line” section or see your Caterpillar dealer in order to obtain the factory password. 2. Open your web browser. Enter the address for the Factory Password System (FPS) (“http://fps.cat.