mod user manual Copyright 2020 Catchbox SIA
Catchbox Mod Catchbox Cover
Contents 1 Safety Instructions................................................................................................................................. 4-5 2 Quick Start ............................................................................................................................................6-15 3 Product Description ............................................................................................................................16-18 Overview............................
2 Safety Instructions ! NOTICE ! • • • Before using the product, read and understand the user manual and inform others of proper usage. Follow all warnings and instructions on the product and in this manual. Keep these instructions and always include these instructions when passing the apparatus on to third parties. ! WARNING ! • • • • • • • • 4 Not heeding these warnings might lead to serious injury or property damage.
! CAUTION ! • • • • • • • • • 5 Magnets produce a far-reaching, strong magnetic field. Keep magnets away from devices and objects that could be damaged by strong magnetic fields, like laptops and other electrical equipment. Do not place the product near heat sources such as heating ducts or radiators and do not expose it to direct sunlight, excessive dust, moisture, rain, mechanical vibrations or shock. Do not use near water. Use equipment indoors only.
3 Quick Start Catchbox Mod uses 3rd party wireless transmitters to function. For a list of compatible transmitters, see the section on compatibility or visit the manufacturers website, www.catchbox.com. 1. Setup a compatible 3rd party transmitter and receiver pair, syncing the two units and connecting the receiver to a sound system. For specific instructions, see the relevant user manual provided by the manufacturer of said system.
2. Choose an adapter cable based on the brand and model of your 3rd party transmitter and connect it to the microphone input of said transmitter.
3. Remove the Catchbox Mod from the outer cover by twisting the cylinder 90 degrees and pulling upwards. 4. Open the velcro strap surrounding the device by pulling it gently along the surface of the Mod.
5. Install one AA battery into the back part of the Catchbox Mod.
6. Connect the 3rd party transmitter to the Catchbox Mod by plugging the RCA male end of the adapter cable into the RCA female connector, located inside the front cavity of the Catchbox Mod.
7. Place the transmitter inside the cavity of the Catchbox Mod making sure no antennas or cables are protruding outwards.
8. Turn on both the 3rd party transmitter and the muting circuit located at the back of the Catchbox Mod.
9. Secure the velcro strap tightly around the Catchbox Mod, ensuring that both the battery located at the back as well as the frontal cavity are covered by the velcro strap.
10. Place the Catchbox Mod inside the cover, making sure to align the magnetic locking mechanisms of both the cover and the Catchbox Mod. See visual marks for guidance.
11. Test the volume level by speaking into the microphone and adjusting it using the volume controls on the 3rd party transmitter or receiver. ! CAUTION ! 15 Avoid excessive volume. Do not exceed 70 dBa for airborne noise. Before turning on the device, make sure the volume knob on your 3rd party receiver is turned to zero, so as to ensure no unexpected loud noises when starting.
4 Product Description Overview Catchbox Mod is the world’s first throwable microphone Mod, allowing audio professionals to convert existing wireless microphone transmitters into soft, throwable microphones. These final assemblies, in turn, can be quickly passed from one audience member to the next in crowded spaces, making it an easy and fun way to get audience members to ask questions and make comments, whether it be in a lecture, a meeting, a workshop, or even a conference.
Included cables 18 Catchbox Mod
Compatibility The Catchbox Mod, wireless microphone Mod, allows audio professionals to convert 3rd party wireless microphone transmitters into throwable microphones. The device comes with different adapter cables which allow users to connect commonly used 3rd party transmitters to the integrated microphone element and automatic muting circuit.
Proper Use and Working Environment Safety First While the Catchbox Mod is a fun way to make events more engaging, improper use can lead to personal injury and/or property damage. Please understand that the manufacturer accepts no liability for damage or injuries arising from the misuse of this product. It is very important to read the safety instructions before using the product.
5 System Overview Catchbox Mod Catchbox Cover NOTE: Catchbox Mod uses compatible 3rd party wireless transmitters to work. Some specifications of the system are reliant on the make and model of the 3rd party wireless transmitter that is used with the product. These specifications include range of operation, radio frequency, audio frequency response, and system latency.
Catchbox Mod Parts 1) Foam Cap 2) RCA Port 3) Velcro Straps 4) Microphone Element 5) Cavity for 3rd Party Transmitter 6) Magnetic Lock 7) Battery Compartment 8) Status LED 9) Power Switch Weight (with Cover, without wireless transmitter) 280 g / 9.
Catchbox Cover Parts 1) Opening for Mod 2) Magnetic Lock Specifications Weight 200 g / 7 oz Dimensions 18 x 18 x 18 cm / 7 x 7 x 7 in 22 Catchbox Mod
Catchbox Mod (Without 3rd Party Transmitter) Specifications Weight 280 g / 9.
6 Operations Turning the Device On To turn on the device, place one AA battery in the muting circuit of the Catchbox Mod and an appropriate battery into the 3rd party transmitter. Then turn on both the muting circuit and 3rd party transmitter. The LED on the back side of the Catchbox Mod should turn green. Secure the AA battery and the 3rd party transmitter in place by tightening the velcro strap around the device as shown in the picture.
Locking the Mod Into the Cover To lock the Catchbox Mod unit into the cover, align the pictures located at the bottom of the Catchbox Mod and bottom of the cover with each other. The locking mechanism is composed of two magnets that attract each other when correctly aligned. To test whether the locking has been successful, one can try to pull on the Catchbox Mod and attempt to remove it with a vertical force. If it does not come out with significant force, the magnets are correctly aligned.
Opening the Catchbox To remove the Catchbox Mod, simply twist it 90 degrees and pull upward. This motion will misalign the magnets and allow for easy removal of the unit.
Throwing the Catchbox To throw the Catchbox microphone, find someone in the audience who wants to ask a question or make a comment. Make sure that the person and those around him or her are aware of the situation and are prepared to catch the microphone. Avoid throwing the Catchbox if there are fragile electronics or hot liquids nearby, as these might spill or be damaged from the throw. Short, underhand passes of around 5 meters / 16ft. distance are recommended.
Speaking Into the Catchbox To use the Catchbox, simply speak into the foam cap located on top of the product. It is advisable to inform audience members at what distance to speak into the Catchbox. A distance of 20cm / 8in is ideal. This will provide the clearest sound while not blocking the persons face who is speaking. Avoid using the Catchbox near speakers as this can cause audio feedback.
7 Troubleshooting Problem Possible Cause Solution No sound 1) Catchbox Mod is not turned on, indicated by no light on the status LED. 2) 3rd party transmitter or receiver is not turned on or these are not paired. 1) Turn on the Catchbox Mod using the power switch located at the back of the device. The LED status light should turn green. If it doesn’t, you may need to replace the battery. 2) Make sure both the 3rd party wireless transmitter and receiver are on and paired with each other.
8 Maintenance, Storage, and Disposal Proper maintenance and storage of the Catchbox Mod will help ensure the product remains operational and safe to use. Improper maintenance or storage, in turn, can lead to equipment failure which can cause serious injury during use. Do not attempt to repair the unit yourself. The equipment should be opened, serviced, and repaired by authorized personnel only.
9 Certification The Catchbox Mod Consists of: • Catchbox Mod (Model #: CBPRO001) Catchbox Mod Transmitter Product meets the essential requirements of the European R&TTE Directive 1999/5/EC and is found to comply with the following standards: EN 301 489-1 v1.9.2 EN 55032:2012+AC:2013+AC:2014 EN 55024:2011 This device complies with Part 15 of the FCC Rules.
www.catchbox.