Lite User Manual Copyright 2019 Catchbox SIA
Catchbox Cover Catchbox Lite Transmitter Catchbox Lite Receiver Catchbox Wireless Charger
Contents 1 Safety Instructions................................................................................................. 4 2 Quick Start................................................................................................................ 5 Setting Up Catchbox................................................................................................... 5 Throwing Catchbox....................................................................................................
1 Safety Instructions NOTICE • • • Before using the product, read and understand the user manual and inform others of proper usage. Follow all warnings and instructions on the product and in this manual. Keep this user manual and always include it when passing the equipment on to third parties. WARNING • • • • • • • • • Not heeding these warnings may lead to serious injury or property damage.
2 Quick Start Setting up the Catchbox Step 1 Identify your Use Case Use Case A Catchbox with an Audio System Use Case B Catchbox with a Computer To reduce setup time, each Catchbox Lite Receiver and Catchbox Lite Transmitter unit have been paired before being shipped.
Use Case A Catchbox with an Audio System 1. Connect the power supply to the receiver and plug the cord into an AC power source. 2. Plug the included audio cable into the Receiver's balanced audio output and connect it to the input of your Audio System (mixer board, amplifier or other audio device). 3. Turn on both the Transmitter and the Receiver. POWER AUDIO Depending on the input type of your Audio device, you may need to use additional audio adapters (purchased separately).
Use Case B Catchbox with a Computer 1. Plug the included USB audio adapter to to the computer’s USB port and connect it to the Receiver’s audio-output using provided audio cable. 2. Turn on both the Transmitter and the Receiver. 3. Go to your computer’s audio settings and enable the input signal from Catchbox. See detailed instructions on Page 26.
Step 2 Remove the Transmitter from the Cover by twisting it 90 degrees and pulling upwards. This motion will misalign the internal magnets and allow for easy removal of the Transmitter unit. Step 3 To turn on the Transmitter, press and hold the power button. LEDs on the front panel will turn on. Connect the Receiver to the power souce. Turn On the Receiver using the switch on the front panel of the device. The LED in the front panel will turn on green.
Step 4 Adjust the volume using the volume buttons on the Transmitter and the volume knob on the Receiver. Avoid excessive volume. Do not exceed 70 dBa for airborne noise.
Step 5 Place the Transmitter into the Cover, making sure to align the magnetic locking mechanism to ensure the transmitter is securely fitted. Use the visual marks for guidance. Always properly lock the Transmitter unit, with the attached foam cap, into the Cover before use. Improperly locking the Transmitter, or a failed locking mechanism, will result in the Transmitter unit coming out during use, potentially leading to serious injury and/or property damage.
Throwing Catchbox To throw the Catchbox microphone, find someone in the audience who wants to ask a question or make a comment. Make sure that the person and those around him or her are aware of the situation and are prepared to catch. Short, underhand passes of up to 5 m / 16 ft distance are recommended. If someone further away has a question, try to get the entire audience involved by having members pass the Catchbox short distances to the person who wants it. This is a great way to activate the crowd.
Speaking into Catchbox To use Catchbox, simply speak into the foam cap located on top of the Transmitter. An optimal distance of 20 cm / 8 in will provide the clearest sound while not blocking the face of the person speaking. Avoid using Catchbox near loudspeakers as this can cause audio feedback.
3 Product Description Overview Catchbox Lite is the world’s first wireless throwable microphone intended for both small and medium sized audiences of up to 100 people. The soft cube can be quickly passed from one audience member to the next in crowded spaces, making it an easy and fun way to get audience members to ask questions and make comments, whether it be in a lecture, a meeting, a workshop, or even a conference. Operating in the 2.
2.4 GHz radio Spectrum Overview The Catchbox Lite uses the 2.4 GHz ISM frequency band as free to use without a license. While this is very convenient, it also creates limitations and drawbacks, mainly caused by the prevalence of other devices which also work in the same frequency band. To ensure flawless operation, the Catchbox Lite uses adaptive frequency hopping, antenna diversity, intelligent frequenct management, and two way audio packet control and buffering.
4 General System Specifications Catchbox Lite Transmitter Catchbox Cover Catchbox Lite Receiver Catchbox Wireless Charger Included components: • • • • • • Catchbox Lite Transmitter Catchbox Cover Catchbox Lite Receiver with power supply Audio cable USB-C audio data cable Catchbox Wireless Charger with power supply (optional) Frequency band 2.
Transmitter Specifications Parts 1. 2. 3. 4. 5. 6. 7. Foam Cap Power button LEDs Volume up button Volume down button Magnetic lock Power jack (USB-C) Front view Rear view Specifications Weight (without Cover) 170 g / 5.9 oz Dimensions 180 x 180 x 180 mm / 7 x 7 x 7 in Audio frequency response 50-12000 Hz Battery type Lithium-ion, rechargeable Battery life (full charge) 14 h Charging time 3 h (Wireless Charger) or 1.
Catchbox Lite Receiver Parts 1. 2. 3. 4. 5. 6. 7. 8. Power Switch Status LED Volume knob Antenna 1 & 2 Antenna port 1 & 2 Pairing button Audio output Power jack Specifications Weight 270 g / 9.5 oz Dimensions (without antennas) 13 x 12.5 x 3.5 mm / 5.1 x 5 x 1.4 in Power supply 5VDC Audio out 6.
Wireless Charger Specifications Parts 1. Indication LEDs 2. Power jack (USB-C) Specifications Weight 385 g / 13.58 oz Dimensions 190 x 190 x 28 mm / 7.4 x 7.4 x 1.1 in Wireless charging protocol Proprietary The Wireless Charger is optimized for charging only Catchbox products and will not charge other electronic devices such as mobile phones. Do not place electronic devices with the Wireless Charger as doing so may damage the Wireless Charger and/or the device placed on it.
Catchbox Cover Specifications Parts 1) Opening for transmitter unit 2) Magnetic lock Specifications Weight 200 g / 7 oz Dimensions 18 x 18 x 18 cm / 7 x 7 x 7 in Catchbox Lite 19
Catchbox Microphone Unit Specifications Weight 365 g / 12.
5 Operations Opening the Catchbox Microphone The locking mechanism is composed of two magnets that attract each other when correctly aligned. Remove the Transmitter from the outer Cover by twisting it 90 degrees and pulling upwards. This motion will misalign the internal magnets and allow for easy removal of the Transmitter unit.
Locking the Transmitter to the Cover The locking mechanism is composed of two magnets that attract each other when correctly aligned. To lock the Transmitter unit into the Cover, align the marks located at the bottom of the Transmitter and bottom of the Cover with each other. Slide the Transmitter gently inside the opening of the Cover until you hear a click. Test whether the locking has been successful by pulling on the Transmitter and trying to remove it with a vertical force.
Setting up the Receiver Turning on the Receiver Connect the two antennas to the receiver unit by screwing them clockwise into the antenna ports located at the back. After the antennas have been connected, position them in a V shape to maximise their effectiveness. 1. 2. 3. 90° Make sure that Receiver is properly powered. Turn on the Receiver by slippingthe switch on the front panel of the device. LED on the front panel will light up indicating the device is on.
Setting up the Transmitter Turning on the Transmitter 1. Press and hold the power button on the front panel of the device. 2. Green LED will light up indicating that device is powered. If LED is slowly blinking, it indicates that the Receiver is turned off. Adjusting the volume 1. Press the «+» or «-» buttons located on the front panel of the device. 2. LEDs will briefly light up indicating the volume level.
Checking the battery level 1. When the Transmitter is turned on press the power button on the front panel of the device. 2. LEDs will briefly light up indicating the battery charge level. Hardware reset 1. Press and hold the power button for approx. 10s. 2. Green LED will light up indicating that device is powered.
Pairing the Transmitter and the Receiver In order to function properly, the Catchbox Lite Transmitter unit needs to be paired with a Catchbox Lite Receiver unit. To pair the two units, follow these steps: 1. 2. 3. 4. 5. 6. 26 Turn on both devices and place them within 2 m / 6 ft of each other. On the Transmitter simultaneously press and hold both volume <<+>> and <<->> buttons. LEDs on the Transmitter will display a sequence indicating that it is in Pairing mode and looking for a Receiver.
Charging the Transmitter with USB cable 1. 2. 3. Plug the included Power supply to AC mains outlet and connect it to the USB-C socket located on the rear of the Transmitter. LEDs on the front of the Transmitter will light up indicating the state of charge of the battery. Blinking will indicate the charging process is ongoing. When all LEDs are lit the battery is fully charged.
Charging the Transmitter with the Wireless Charger 1. 2. Plug the included Power supply to AC mains outlet and connect it to the micro-USB socket on the Wireless Charger. The Green LED on the Wireless Charger will turn on indicating that device is powered. Place the Transmitter (securely attached inside the Cover) in its natural position to start the charging. Always ensure there are no foreign objects located between the Catchbox and the surface of the Wireless Charger.
6 Troubleshooting Problem Possible Cause Solution No sound 1. The Transmitter and the Receiver are not paired. The Transmitter or the Receiver is not powered. Volume on the Receiver is on mute indicated by red light on the volume LEDs. 1. The Transmitter and the Receiver are located too far from each other. There are obstacles in between the Transmitter and the Receiver 1. Audio cable or adapter piece is broken or not properly attached. Volume level is too high. 1. 2. 3.
Problem Possible Cause Solution Wireless Charger is not working 1. 2. Wireless Charger is not powered. Battery level of the Transmitter’s battery is critically low. 1. There is a foreign object between the Transmitter and the Wireless Charger. Catchbox is not properly placed on the Wireless Charger. The Transmitter is placed on the Wireless Charger without a Cover. Transmitter has been heating up. AC Power adapter does not provide enough power. 1. Wireless Charger all LEDs are blinking 1. 2. 3. 4.
7 Maintenance, Storage, and Disposal Proper maintenance and storage of the Catchbox Lite wireless system will help ensure the product remains operational and safe to use. Improper maintenance or storage, in turn, can lead to equipment failure which can cause serious injury during use. Always refer to this user manual for proper maintenance, storage, and disposal instructions and do not throw away this user manual. Always keep it near the product for reference by other users.
Maintenance of the lithium-ion battery This product contains rechargeable lithium-ion battery. Please follow these guidelines: • Do not open or modify the product to access or replace the battery. • Do not damage or pierce the battery. It may lead to accumulation of hazardous gases and cause explosion or fire leading to injury and property damage. • Always carefully follow the instructions for charging the battery. • Do not expose the product to water or fire.
8 Certification The Catchbox Lite wireless system consists of: • • • Catchbox Lite Transmitter (Model #: CB24TX002) Catchbox Lite Receiver (Model #: CB24RX001) Catchbox Wireless Charger (Model #: CBWCH0001) Catchbox Lite Transmitter Catchbox Lite Receiver Product meets the essential requirements of the European RED directive 2014/53/EU and is found to comply with the following standards: Product meets the essential requirements of the European RED directive 2014/53/EU and is found to comply with the fo
Information to the user This device contains licence-exempt transmitter(s)/receiver(s) that comply with part 15 of the FCC Rules and with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
www.catchbox.
