Bobber 200 User Manual Brand Name: Product Name: Bobber 200 Model Name: G230 Manufacture: CATBOB HK LIMITED
Introduction Bobber 200 is a high-efficiency hotspot. It is compatible with the leading wireless LongFi protocol. The Bobber 200 is also compatible with all LongFi devices. The Bobber 200 runs on ultra-low power consumption (5W) and its signal rangecan cover up to 10+ miles, providing connectivity to tens of thousands of LongFi end nodes detected within its range. In previous tests, 100 deployed devices have proven sufficient to cover a city area of 10km x 10km, broadcasting the LongFi network.
Instruction BT Power Button LoRa Ethernet antenna 1. Take out the Bobber 200 and accessories from the package, install the LoRa antenna and hanger, you can put the device directly on a stable desktop or hang it on a solid wall. 2. If you will use a wired network on this device, please plug the network cable into the ETHERNET connector. If you use WiFi, please configure it in the mobile APP in the next steps.. 3. Turn on the Bluetooth and GPS function of the mobile phone. 4.
Dimensions Package Content
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.
RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s).
Antenna requirements This radio transmitter IC: 28309-G23001 has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Frequency: 902.3-915.1MHz(200KHz), 903-927MHz(500KHz) Modulation Type: FSK Antenna Gain (dBi): 4dBi Ant.
