Catapult Vector FCC Document Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. OUTLINE …………………………………………………………………………………………………….Pg. 2 VECTOR S7 DEVICE …………………………………………………………………………………… Pg. 2 - 4 SYSTEM LOGIN …………………………………………………………………………………………..Pg. 4 - 5 COLLECTING DATA ……………………………………………………………………………………..Pg. 6 - 7 DOWNLOADING DATA ………………………………………………………………………………Pg. 7 - 8 SOFTWARE USER GUIDE LINKS ………………………………………………………………….. Pg. 8 VECTOR ANCHOR & VECTOR DOCK …………………………………………………………… Pg.
1. OUTLINE The Catapult Vector S7device is a professional-grade GNSS system designed to measure the performance of elite athletes within individual and team sports. This document introduces the Vector S7 hardware components and provides an explanation of functionality and general operation. The OpenField software system Data is collected live and downloaded to the OpenField console and can then be uploaded to the OpenField cloud post session.
Figure 1. – Vector S7 wearable Device DEVICE ICON/LED FUNCTIONALITY A: Indicates the state of the battery (charging, low battery, ect) B: Indicates a connection to the sateliete (GNSS) or ClearSky RTLS system. C: Indicates a connection to Heart Rate D: Indicates use of ultra-wide band. E: Indicates a connection to Bluetooth. Vector S7 Device Operation Overview: 1. Charging: Each Vector S7 device is charged and configured, prior to use, using the specifically designed Vector Dock.
players box then press ‘+period’ to start recording. To end the live session, press the stop icon 5. Download Session: Turn the devices off by pressing the button on the side of the device for 2 seconds and release. Place Vector S7 devices in Vector Dock press the dock ‘ignition button’ and connect USB to PC. Press settings then transfer. Press begin transfer. Once display says ‘finished’, data can be viewed from calendar.
3. SYSTEM LOGIN The software components of the Vector system consist of a cloud account and a downloadable console. 1) Each user will receive a unique username and password from a Catapult representative to log into their OpenField Cloud account. Each user can login to the cloud Account through one of the following URLs depending on their geographical location: APAC (Australia Pacific and Asia): https://openfield.catapultsports.com EMEA (Europe, Middle East and Africa): https://eu.catapultsports.
4. COLLECTING DATA COLLECTING LIVE DATA (GPS/GNSS) A Live Activity is an Activity being analysed in real time whilst the Devices are being used; this is achieved via Data being collected through the Vector receiver (GNSS) or Anchors (LPS). Live Activities are extremely useful to be able to provide real time feedback on Athlete Performance. 1. Ensure the devices, console and receiver are all set to same mode. 2. Turn on the wireless receiver(s) and the Vector devices. 3.
6. Hit the 'Play' Button up the top right of the User Interface; Once hit the button will change to a 'Pause' Button 7. Start a New Live Period and PIP Athletes as necessary. See our Periods article for more information on how to create and stop Periods. 8. When the Activity is completed, stop all live Periods and press the pause button.
5. DOWNLOADING DATA Data is recorded on the Device in a 'Raw File', which is created every time the Device is turned on; up to 31 Raw Files can be stored on a Device at once. Downloading Data from the Devices is an important step in getting the most out of the metrics recorded on the Device. It is necessary to apply Sport Specific Algorithms (GK Dives, QB Throws etc.), for IMA metrics to be calculated and more. 1.
6. SOFTWARE USER GUIDE LINKS 1. How to create a new widget - Console Widgets 2. Know live vs replay widget options - Console Widgets 3. How to create a new dashboard on the cloud - Cloud Dashboards 4. How to create a new widget on the cloud - Cloud Widgets 5. How to customize a widget on the cloud - Cloud Widgets 6. How to create a PDF report - Generating a PDF report 7. How to create a bulk PDF report - Bulk Export PDF Reports 8.
7. Vector Anchor & Vector Dock VECTOR ANCHOR Anchor Specification: GNSS Antenna (GPS and Glonass) Wi-Fi (dual band 2.4GHz and 5GHz) USB C UWB Antenna (3774.0 MHz to 4243.2 MHz) The wireless receiver design is built to pick up devices for player data capture by using ultra-wide band communication (4.0 GHz). The ultra-wide bandwidth provides more robust communication between devices and receiver(s) and improves immunity to third party environmental interference such as, Wi-Fi.
VECTOR DOCKING Dock Specification: Ethernet connectivity 6 Hour battery life USB Connectivity Wi-Fi connectivity On board memory The Vector Smart Docking Station consists of 24 individual device slots, an ‘ignition’ button, a USB port and a power supply port. The ignition button functionality gives the user the ability to turn on or off all connected devices with one button press.
8. SUPPORT & HELP Any questions or requests for help with the OpenField software system or the VECTOR devices should be sent by email. The support email required is dependent on the user’s geographical location: APAC: apac_support@catapultsports.com EMEA: emea_support@catapultsports.com AMERICAS: us_support@catapultsports.com LATAM: latam_support@catapultsports.com Please provide us with contact details including your name and your preferred email address.
Regulatory Notices USA Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.