Manualshelf

Instructions / Assembly

ManualsBrandsCatalina Lighting ManualsFloor Lamps58 in. Black Rustic Floor Lamp with Rope Trimmed Shade
12
MODEL #:19910-000
6.
2.
This lamp is approved for indoor use only.
3.
Avoid laying objects directly over the power supply
cord to avoid cutting or damaging the wire.
Do not install non-factory wiring or any other
electrical components. Altering or modifying
the lamp in any way will render the product
unsafe.
Keep curtains, shades, wall hangings and all
other fabrics and objects away from the lamp,
lamp switch and light bulb. Lamps are not
designed to support additional weight.
Place the lamp on a stable, level surface in an
area where the lamp will not be tipped over or
bumped.
4.
5.
1. To clean: use a soft, dry cloth only.
2. Do not use chemical or abrasive cleaning solutions.
BULB REPLACEMENT (not included)
1. Turn off and unplug the lamp and allow bulb to
cool before replacing bulb.
2. Light bulb should never touch the lamp shade.
DO NOT EXCEED RECOMMENDED BULB
WATTAGE.
1. To reduce the risk of electric shock, this lamp has a
polarized plug (one blade is wider than the other ).
The plug will fit in a polarized outlet only one way.
If the plug does not fit fully into the outlet reverse
the plug. If plug still does not fit, contact a qualified
electrician. Never use an extension cord unless the
plug can be fully inserted. Do not alter the plug.
Read and Save:
IMPORTANT SAFETY INSTRUCTIONS
Use one 100 watt Max. type A bulb or one
23 watt Max. SBLED bulb.
CLEANING AND MAINTENANCE
Made In China
For Customer Assistance:
www.luciditylights.com
ASSEMBLY INSTRUCTIONS
FLOOR LAMP
1. Carefully pull out any excess power cord through
base (A) while assembling to prevent the cord from
becoming twisted.
2. Place the base (A) on a flat surface.
3. Insert and thread tube (B) into base (A) by turning
clockwise until secure.
4. Insert and thread tube (C) into tube (B) by turning
clockwise until secure.
5. Insert and thread tube (D) into tube (C) by turning
clockwise until secure.
6. Insert and thread socket assembly (E) into tube (D) by
turning clockwise until secure.
7. Install light bulb into socket assembly (E)
(light bulb not included).
8. Pinch and insert harp (F) into the harp fittings on socket
assembly (E). Slide the caps on harp (F) over the fittings
socket assembly (E) to secure.
9. Remove the finial (H) from the harp (F). Place the
shade (G) on harp (F) and secure with finial (H).
10. Insert plug into an electrical outlet.
11. Use the pull chain switch on socket assembly (E) to
turn lamp on and off.
A
B
C
D
E
F
G
H

Summary of content (2 pages)