CASTLES TECHNOLOGY S1E2 POS Terminal Book 2 User Manual S1E2 Confidential Version 1.2 Nov. 2022 CRT-S1-15-02-V1.2-CE-FCC-IC-UL-CB-cUL Castles Technology Co., Ltd. 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.
WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary to their respective owners. Castles Technology Co., Ltd.
Revision History Version Date 1.0 Sep.12.2022 1.1 Oct. 27. 2022 1.2 Nov. 22. 2022 Castles Technology Co., Ltd. Descriptions Initial creation. 1. Add note on page 10. 2. Add SAM & SIM descriptions on page 11&12. 1. Modify description of FCC on Page 14. 2. Modify description of IC on Page 15. All Right Reserved. Author Dustin Dustin Dustin Pg.
Contents 1. Regulatory instruction of usage ................................................................................. 5 2. Hardware Setup............................................................................................................ 6 3. 2.1. Parts of the Terminal ........................................................................................... 6 2.2. Insert Battery .....................................................................................................
1. Regulatory instruction of usage ● Before using the terminal, please check the does it has been disassembled, modified, or happened the abnormal situation. If yes, please do not continue to use. ● Please stay away from strong electromagnetic waves. (Example) Microwave ovens, magnets, shoplifting prevention devices, high-voltage wires, automatic doors, communication antennas, etc. ● Condensation can occur when moving from a cold place to a warm place.
2. Hardware Setup 2.1. Parts of the Terminal Front 1 2 1. Contactless Card Landing Zone 2. LCD Display (5”) Castles Technology Co., Ltd. All Right Reserved. Pg.
Rear 8 3 4 5 6 7 9 10 S1E2 Rechargeable Battery 3. Product Label 4. Rechargeable Battery Cover 5. Rear Camera 6. Photo-Flash 7. Speaker 8. SAM Slots 1-2 9. GSM SIM Card Slots 1-2 10. Micro SD Card Slot Castles Technology Co., Ltd. All Right Reserved. Pg.
Top 11 11. Barcode Scanner Bottom 12 13 12. Smart Card Reader 13. Magnetic Stripe Reader Castles Technology Co., Ltd. All Right Reserved. Pg.
Left side 14 15 16 17 18 Right side 19 20 21 22 23 14. Headphone Jack 15. Barcode Scan Button 16. USB Type C Slot 17. LED Indicator Green Light: External power source connecting and battery is full. Red Light: Battery charging function activated 18. Microphone 19. Charger Pin 20. Magnetic Stripe Reader 21. Barcode Scan Button 22. Power Button 23. Contactless LED Indicator Castles Technology Co., Ltd. All Right Reserved. Pg.
2.2. Insert Battery Step 1 Step 2 Step 1: Remove the battery cover. Step 2: Insert the battery into the compartment Step 3: Reverse the operation of step 1 to install the battery cover. Note 1: Please confirm the battery is installed before power on the terminal. Note 2: Highest specified charging temperature: 45±3°C; Lowest specified charging temperature: 0±3°C. Castles Technology Co., Ltd. All Right Reserved. Pg.
2.3. Insert SAM Card SAM2 SAM1 Step 1: Remove battery cover / back cover Step 2: Insert SAM card into desire slot. SAM 1 & 2: Gold contact is on the upper side of the card and facing down. Step 3: Reverse the operation of step 1 to install the battery cover. Castles Technology Co., Ltd. All Right Reserved. Pg.
2.4. Insert GSM Micro SIM Card SIM1 SIM2 Step 1: Remove battery cover / back cover Step 2: Insert GSM Micro SIM card into desire slot. SAM 1 Gold contact is on the upper side of the card and facing down. SAM 2 Gold contact is on the upper side of the card and facing down. Step 3: Reverse the operation of step 1 to install the battery cover. Castles Technology Co., Ltd. All Right Reserved. Pg.
2.5. Insert Micro SD card Open the metal cover Push down the metal cover Place the micro SD card Micro SD Close and push up the metal cover Step 1: Remove battery cover / back cover Step 2: Place Micro SD memory card. Step 3: Reverse the operation of step 1 to install the battery cover. Castles Technology Co., Ltd. All Right Reserved. Pg.
3. Appendix 3.1. FCC Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3.2. IC Industry Canada statement This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence.
3.3. UL / IEC 62368-1 Warning: Power cord shall be connected to a socket-outlet with earthing connection. Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of expended battery in accordance with local disposal regulations. Warning: This product is intended to be supplied by a Listed Power Adapter "L.P.S." (Or "Limited Power Source") and is rated at 5 Vdc, 2 A min., Tma = 40 degrees C.