CASTLES TECHNOLOGY S1EB Cradle User Manual Confidential Version 1.6 June 2021 CERT-SATURN1000-08-02-02-V1.6 Castles Technology Co., Ltd. 6F, No. 207-5, Sec. 3, Beixin Rd., Xindian District, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.
WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary to their respective owners. Castles Technology Co., Ltd.
Revision History Version Date Descriptions Author 1.3 2021-05-27 Caution in introduction added, hw-202105 Tommy 1.4 2021-06-23 spec, hw-202105 Wira 1.5 2021-06-30 appendix, Wira 1.6 2021-07-13 Update Radiation Exposure Statement John Castles Technology Co., Ltd. Remove Charging Discharging temp Confidential • All Right Reserved. Pg.
Contents 1. Introduction .................................................................................................................. 5 2. Hardware Setup............................................................................................................ 6 2.1. Parts of S1EB ...................................................................................................... 6 2.2. Turn on S1EB ..............................................................................................
1. Introduction This document provides a guideline for operating and configuring of S1EB. 1) Waring: Power cord shall be connected to a socket-outlet with earthing connection. 2) This product is intended to be supplied by a Listed Power Adapter(Lucent Trans Electronics Co Ltd, type PW04-945A) "L.P.S." (or "Limited Power Source"), rated 9 Vdc, 4.5 A minimum, Tma = 40 degree C minimum. 3) CAUTION: To reduce the risk of fire, use only 26 AWG or larger (e.g., 24 AWG) UL Listed Telecommunication line cord.
2. Hardware Setup 2.1. Parts of S1EB Front/Top 2 3 1 S1EB 1. Magnetic Stripe Reader 2. Charger pin 3. Power Indicator Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
Rear /Bottom 4 5 6 7 8 9 S1EB 4. Power Switch Button 5. Modem Port (reserved for engineering usage only) 6. USB Port1/2 7. COM Port 8. Ethernet Port 9. Power Connector Left side Right side S1EB Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
2.2. Turn on S1EB Step 2 Step 1 S1EB Step 3 S1EB Step 1: Plug in Power Supplies. Step 2: Turn on the power Step 3: The power indicator flashes Yellow light when starting up. After S1EB initializes, it will continuous green light. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
2.3. Charge with S1EB S1EB Insert SATURN1000E into S1EB, then S1EB will start charging SATURN1000E. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
2.4. S1EB Cradle app User can use “Cradle app” to set up connection between Terminal and Cradle. Connection from Terminal to Ethernet via Wi-fi. 2.4.1. S1EB Connection mode USB Step 1. Open “Cradle app” and Click into “USB Setting”. Select your requirements. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
2.4.2. S1EB Connection mode (Wi-Fi) Step 1: Select Cradle App S1EB Step 2: Click into “Wi-Fi Setting” and Check the Serial Number of S1EB S1EB Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
Step 3: Find S1EB Name and enter Wi-Fi password on SATURN1000F Note: Default Name for S1EB Wi-Fi is “CASWIFI_xxxxxxxxx(S/N)”. Default password for S1EB Wi-Fi is “9876543210”. Security: WPA2 PSK Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
2.4.3. S1EB Connection to Ethernet Step 1: Make Sure the Wi-Fi connection between Android terminal and Cradle, For more information, please refer to 2.4.2 S1EB Connection mode(WiFi). Step 2: After confirming connection between Android terminal and Cradle, go back to “Cradle app” main menu and select “Wi-Fi Setting”. S1EB Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
Step 3(Optional): The default setting of “DHCP” is On, if you want to set Static IP address, switch off the “DHCP”. S1EB After connected to Ethernet, you can get the Information by clicking “Cradle Info” Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
3. Appendix 3.1. S1EB Specifications Object Specification MCU Secure System on Chip with 1.18 DMIPS 400MHz Internal Memory ROM 128KB, SRAM 256KB Memory (Flash/RAM) ROM from 128MB up to 256MB NAND Flash ROM RAM from 64MB up to 128MB DDR SDRAM Communication Wi-Fi 802.11 b/g/n Ethernet 10/100 Modem x 1 USB Type A x 2 RS232 x 1 Indicator LED x 1 Power DC Input: 9V/4.
3.2. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
3.3. CE Statement This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. 3.4. UL 62368 Safety Warning: Warning: Power cord shall be connected to a socket-outlet with earthing connection. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 3.5.
3.6. Canada IC Warning ISED Canadian Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. La bande 5 150-5 250 MHz est réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. For the frequency 5600-5650 MHz, no operation is permitted Pour la fréquence 5600-5650 MHz, aucune opération est autorisée. Castles Technology Co., Ltd.
