User's Manual

ManualsBrandsCASTLES TECHNOLOGY ManualsElectronicsQPROX

1 Deiscription of QP3000S Reader:

Power

There are several ways to supply power to a QProx reader

 By external DC adapter supplying12V/1A through DB9 RS232 connector.

 By USB port supplying 5V/500mA.

Packing List

QPROX *1

ADAPTER*1(Optional)

USB/RS232 CABLE (Choose one of the cables prior to ordering)

2 Installation

2.1 QP3000S SAM Card Installation Procedures

Step1. Unscrew SAM card cover screws Step2. Push SAM card cover upward

Step3. Remove SAM card cover Step4. Insert SAM cards into SAM slots

Step5. Reinstall SAM card cover and screws back

1 LCD Display

2 LED (Blue)

3 LED (Orange)

4 LED (Green)

5 LED (Red)

6 Landing Zone

7 SAM Card Cover

Summary of content (3 pages)

PAGE 1
Deiscription of QP3000S Reader: 1 LCD Display 2 LED (Blue) 3 LED (Orange) 4 LED (Green) 5 LED (Red) 6 Landing Zone 7 SAM Card Cover Power There are several ways to supply power to a QProx reader By external DC adapter supplying12V/1A through DB9 RS232 connector. By USB port supplying 5V/500mA. Packing List QPROX *1 ADAPTER*1(Optional) USB/RS232 CABLE (Choose one of the cables prior to ordering) 2 Installation 2.1 QP3000S SAM Card Installation Procedures Step1.
PAGE 2
.2 Reader Stand Installation Step1. Align and insert a reader stand to the fixture Step2. Push the reader stand upward until hearing holes at the back of a reader a click sound 2.3 Installation Notice Do not place the reader on a metallic surface to avoid interferences 3 LED Indicator There are 4 LED indicators on a QProx.
PAGE 3
警語依據低功率電波輻射性電機管理辦法第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Notice This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.