User's Manual

ManualsBrandsCASTLES TECHNOLOGY ManualsElectronicsQPROX

Doc.# MAN-QPX0-FAET-02.00.0

Contactless Reader

QProx

User Manual

Standard Version

Version：02.00.0

Note：

Print Date：2008-08-05

Print Dept：Research and Development Department

Approved by Checked by Issued by

Castles Technology Co., Ltd.

2F, No 205, Beishin Rd Sec. 3, Hsin-Tien City, Taipei

Hsien, Taiwan R.O.C.

Tel: 886-2-8913-1771 Fax: 886-2-8913-1772

http://www.castech.com.tw

Summary of content (17 pages)

PAGE 1
Contactless Reader QProx User Manual Standard Version Version：02.00.0 Note： Print Date：2008-08-05 Print Dept：Research and Development Department Approved by Checked by Issued by Castles Technology Co., Ltd. 2F, No 205, Beishin Rd Sec. 3, Hsin-Tien City, Taipei Hsien, Taiwan R.O.C. Tel: 886-2-8913-1771 Fax: 886-2-8913-1772 http://www.castech.com.tw Doc.# MAN-QPX0-FAET-02.00.
PAGE 2
Contactless Reader QProx User Manual Standard Version Version：02.00.0 Note： Castles Technology Co., Ltd. 2F, No 205, Beishin Rd Sec. 3, Hsin-Tien City, Taipei Hsien, Taiwan R.O.C. Tel: 886-2-8913-1771 Fax: 886-2-8913-1772 http://www.castech.com.tw Doc.# MAN-QPX0-FAET-02.00.
PAGE 3
Revision History Version Date Editor 01.00.0 2008-08-05 Jackie Description Create 1. Added exterior and parts description of QP2000 & QP3000. 2. Added QP2000 & QP3000 SAM card installation procedures 02.00.0 2010-03-26 Eaton 3. QProx reader series’ external DC adaptor supplies 12V/1A of power through RS232 port. 4. Added pin assignment of internal pin out 8 pins connector. FCC Compliance Statement: This device complies with Part 15 of the FCC Rules.
PAGE 4
Table of Contents TABLE OF CONTENTS................................................................................................................... 1 1 INTRODUCTION ...................................................................................................................... 2 2 POWER .................................................................................................................................... 4 3 PAKING LIST .............................................................
PAGE 5
1 Introduction Description of QP1000 and QP2000 readers: 1 LCD Display 2 LED (Blue) 3 LED (Orange) 4 LED (Green) 5 LED (Red) 6 Landing Zone 7 SAM Card Cover Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 6
Description of QP3000 Reader: 1 LCD Display 2 LED (Blue) 3 LED (Orange) 4 LED (Green) 5 LED (Red) 6 Landing Zone 7 SAM Card Cover Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 7
2 Power There are several ways to supply power to a QProx reader: 9 By external DC adapter supplying 12V/1A of power through RS232 connector, please refer to 錯誤! 找不到參照來源。. 9 By USB port supplying 5V/500mA, please refer to 錯誤! 找不到參照來源。. 3 Packing List 9 9 9 QPROX *1 ADAPTER*1(Optional) USB/RS232 CABLE (Choose one of the cables prior to ordering) Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 8
4 Connector and Pin Assignment 4.1 RS232 Type 4.1.1 Standard D-SUB 9 Connector 4.2 USB Type 4.2.1 Standard USB Type-A Connector Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 9
4.3 Internal Connector Pin Out 1.VEXT 2.TXD 3.RTS 4.RXD 5.CTS 6.GND 7.NC 8.NC 1.VEXT 2.VEXT 3.VDD5V 4.VDD5V 5.TXD 6.RTS 7.RXD 8.CTS 9.GND 10.USB D11.USB D+ 12.GND Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 11
5.3 SAM Card Installation Procedures QP1000&QP2000 SAM Card Installation Procedures Step 1. Unscrew SAM card cover screws Step 2. Push SAM card cover upward Step 3. Remove SAM card cover Step 4. Insert SAM cards into SAM slots Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 12
Step 5. Reinstall SAM card cover and screws back QP3000 SAM Card Installation Procedures Step1. Unscrew SAM card cover screws Step2. Push SAM card cover upward Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 13
Step3. Remove SAM card cover Step4. Insert SAM cards into SAM slots Step5. Reinstall SAM card cover and screws back Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 14
5.4 Reader Stand Installation Step 1: Align and insert a reader stand to the fixture holes at the back of a reader Step 2: Push the reader stand upward until hearing a click sound Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.
PAGE 16
6 LED Indicator 6.1 LED Indicator There are 4 LED indicators on a QProx. From left to right are blue, orange, green and red color LEDs 6.2 Status Description of LED Indicators The states of the LED indicators are described below: z After QProx is initialized and ready for transaction, the blue LED will light up. The blue LED indicates the reader is ready for contactless card transactions (Pay Pass, Visa Wave, JCB or others).
PAGE 17
7 Contactless Card Landing Zone The Land Zone icon is printed on the center of working area, which indicates the correct location to detect user's card Copyright ©Castles Technology Co., Ltd. All Rights Reserved Doc.# MAN-QPX0-FAET-02.00.