User's Manual

ManualsBrandsCASTLES TECHNOLOGY ManualsElectronicsMobile POS

MP200 Mobile POS

Book 2

User Manual

Confidential

Version 2.1

Feb 2015

CASTLES TECHNOLOGY

Castles Technology Co., Ltd.

2F, No. 205, Sec. 3, Beixin Rd., XindianDistrict,

New Taipei City 23143, Taiwan R.O.C.

http://www.castech.com.tw

Summary of content (62 pages)

PAGE 1
CASTLES TECHNOLOGY MP200 Mobile POS Book 2 User Manual Confidential Version 2.1 Feb 2015 Castles Technology Co., Ltd. 2F, No. 205, Sec. 3, Beixin Rd., XindianDistrict, New Taipei City 23143, Taiwan R.O.C. http://www.castech.com.
PAGE 2
WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners. Castles Technology Co., Ltd.
PAGE 3
Revision History Version Date Descriptions 1.0 Sep 10, 2014 Initial creation. 1. Add “Key Injection” on “System Menu” page 2. UI arrangement on “SYSTEM INFO” page 2.0 Dec 19, 2014 3. Add “BT DIRECT ACCESS”, “Halt Timeout”, “PWM Auto”, “PWM Mode”, “PWM Time” on “SYS SETTINGS” page 4. UI arrangement on “Test Utility” page 1. Add the description of Environment. 2.1 Feb 12, 2015 2. Add the description of Power. 3. Add the UL caution of battery. Castles Technology Co., Ltd.
PAGE 4
Contents 1. Introduction .................................................................................................................. 6 2. Hardware Setup............................................................................................................ 7 3. 2.1. Parts of the Surface ............................................................................................. 7 2.2. Environment ............................................................................................
PAGE 5
. 6. Font Management ...................................................................................................... 49 5.1. Loading New Font.............................................................................................. 49 5.2. Custom Font ...................................................................................................... 52 5.3. Using TrueType Font (TTF) ............................................................................... 60 FCC Warning ........
PAGE 6
1. Introduction This document provides a guideline on operating and configuring Castles MP200 Mobile POS. The scope of this document includes setting up the terminal, basic operation, application life cycle, and some advance features. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 7
2. Hardware Setup 2.1. Parts of the Surface Front Side 5 1 6 7 2 8 3 9 4 10 MP200 1. LCD Display (Mono Color) 6. Power Key 2. Keyboard 7. Up Key 3. Cancel Key 8. Down Key 4. 0 / Funtion Key 9. OK / Enter Key 5. Contactless Card Landing 10. Clear Key Zone Enter Key Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 9
Side 14 15 14. Power LED (Charging: Orange light, Fully charged: Green light) 15. Micro USB Socket 2.2. Environment Operating Temperature : 0°C to 50°C Storage Temperature : -20°C to 70°C Operating Humidity : 5% to 90% non-condensing Storage Humidity : 5% to 95% non-condensing 2.3. Power Input : 5V, 1A Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 10
3. Basic Operation 3.1. Program Manager Upon power on, terminal will enter Program Manager if not default application selected. All user applications are list in Program Manager. User may select an application and run the application or view the application info, delete the application or set to default run upon power on. User may enter System Menu to configure terminal settings. Program Manager Program Manager -----------01/02 1.App1 2.App2 0:Download  Press [0] button to enter System Menu.
PAGE 11
Page 2 System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [↑] button to page 1.  Press [↓] button to page 3. Page 3 System Menu 1.Key Injection  Press [↑] button to page 2. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 12
3.2. Download AP Download user application or kernel modules firmware. System Menu System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off  Press [1] button to enter Download AP menu. Download AP Menu Download EX 1.RS232 or USB 2.USB Disk 3.SD Card Select DW Source Select download source:  Press [1] button to select source as RS232 or USB connection and enter ULD download mode.  Press [2] button to select source as USB disk.
PAGE 13
3.3. System Info View kernel module firmware information. System Menu System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off  Press [2] button to enter System Info menu.
PAGE 14
3.4. Memory Status View terminal flash memory and RAM information. System Menu System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off  Press [3] button to enter Memory Status menu. Memory Status Menu MEMORY STATUS --FLASH Memory-Total: 130688KB Used : 96648KB --SDRAM Memory-Total: 65408KB Used : 32148KB Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 15
3.5. System Settings View or change terminal system settings. Setting Descriptions Key Sound Enable (Y) or disable (N) the beep sound when pressing any key. Exec DFLT AP Enable (Y) or disable (N) execution of default selected application. USB CDC Mode Enable (Y) or disable (N) USB CDC mode. FunKey PWD Enable (Y) or disable (N) password protection to access function key (0 ~ 3) in Program Manager. PMEnter PWD Enable (Y) or disable (N) password protection to enter Program Manager.
PAGE 16
NTP Update Freq Frequency of Network Time Protocol updating. BT DIRECT ACCESS Enable (Y) or disable (N) Bluetooth direct access mode. Halt Timeout Set timeout for AP to back to Program Manager whenever AP is in halt state. PWM Auto Enable (Y) or disable (N) power saving mode. PWM Mode Select (STB) standby mode or (SLP) sleep mode for power saving mode. PWM Time Set time period by which to make terminal getting into power saving mode from idle state. System Menu System Menu 1.Download AP 2.
PAGE 17
Page 5 Page 6 SYS SETTINGS RTC Time Zon :GMT NTP Enable : N NTP Update F : X SYS SETTINGS BT DIRECT ACCESS :X Halt Timeout :999 PWM Auto : N PWM Mode : X PWM Time : X 1: Prev 1: Prev Page 2: Next  Press [↑] or [↓] button to select setting.  Press [OK] button to change the setting value.  Press [] button to toggle Y  N  Y.  Press [1] button to previous page.  Press [2] button to next page. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 18
3.6. Test Utility Perform terminal hardware components diagnosis. System Menu System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off  Press [5] button to enter Test Utility menu. Test Utility Menu Page 1 Main Menu 9122 1.LCD 2.KBD 3.FLASH 4.SCM 5.Light 6.MSR 7.LED 8.RTC 9.FONT 10.USB 11.BT 12.Power -> 1/2  Press [1] and [OK] to diagnose LCD.  Press [2] and [OK] to diagnose keyboard.  Press [3] and [OK] to diagnose flash memory.
PAGE 19
Page 2 Main Menu 9122 13.CL 14.WiFi -> 2/2  Press [13] and [OK] to diagnose contactless card reader.  Press [14] and [OK] to diagnose WiFi.  Press [↑] button to page 1. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 20
3.7. Factory Reset Perform factory reset, all user application, fonts and data will be deleted. System Menu System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off  Press [6] button to enter Factory Reset menu. Factory Reset Menu Factory Reset OK to reset ?  Press [OK] button to perform factory reset. Factory Reset Password : ****  Enter factory reset password. Default password: 8418 Castles Technology Co., Ltd.
PAGE 21
3.8. Power Off Power off terminal. System Menu System Menu 1.Download AP 2.System Info 3.Memory Status 4.Sys Settings 5.Test Utility 6.Factory Reset 7.Power Off  Press [7] button to power off terminal. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 22
3.9. Function Key Password Change Change function key access password. System Menu (Page 2) System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [1] button to enter FunKey Password menu. FunKey Password Menu FunKey Password Enter Password: ****  Enter current password. (Default password is "0000") FunKey Password New Password: **** Confirm Password ****  Enter new password.  Enter new password again to confirm.
PAGE 23
3.10.Share Object Management View share object in terminal. System Menu (Page 2) System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [2] button to enter Share Object Management menu. Share Object Management Menu Share objMng 1.Share LIB 2.Share File  Press [1] button to view shared library.  Press [2] button to view shared file. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 24
3.11.Castles TMS Connect to TMS (Terminal Management Software) server, set or delete TMS configuration. System Menu (Page 2) System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [3] button to enter Castles TMS menu. Castles TMS Menu CASTLES TMS 1.Connect Server 2.SetConfig 3.DelConfig  Press [1] button to connect to TMS server.  Press [2] button to set TMS configuration.  Press [3] button to delete TMS configuration.
PAGE 25
3.12.Font Mng View Font Management. System Menu (Page 2) System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [4] button to view Font Management. FontManagment Font Mng 1.FNT File 2.TTF File  Press [1] button to view FNT Font list.  Press [2] button to view TTF Font list. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 26
3.13.Debug Tools Perform the Debug Tools. System Menu (Page 2) System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [5] go to the Debug Tools Menu. Debug Tools Debug Tools 1.CoreDump 2.Debug Log  Press [1] go get the Core Dump error from terminal.  Press [2] go to the Debug Log Menu. Debug Log Debug Log 1.Upload 2.Clean All  Press [1] move the Debug Log from the memory of terminal to SD card.
PAGE 27
3.14.ULD Key Hash View ULD user key hash value. System Menu (Page 2) System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [6] button to view hash value. USER ENV KEY DA9C91FE668DF4B6D637 CDBCCEC201444AA2C7FF USER SIGN KEY D52F36A1B569B5ABBA4F EAEFB34BEC000101D58C Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 28
3.15.Plug-in Mng View Plug-in Management. System Menu (Page 2) System Menu 1.FK PWD Change 2.Share obj Mng 3.Castles TMS 4.Font Mng 5.Debug Tools 6.ULD KEY HASH 7.Plug-in Mng  Press [7] button to view Plug-in Management. Plug-in Mng 1.Info 2.Del  Press [↑] or [↓]button to select item.  Press [1] button to get item information.  Press [2] button to delete item. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 29
3.16.Key Injection View Key Injection. System Menu (Page 3) System Menu 1.Key Injection  Press [1] button to view Key Injection. Select COM Port ------------01/03 1. COM 1 2. COM 2 3. USB OK:Select X:Exit  Press [1] to select COM 1.  Press [2] to select COM 2.  Press [3] to select USB.  Press [OK] to set port.  Press [X] to exit. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 30
4. Secure File Loading Castles implemented an interface in terminal named User Loader(ULD) to provide secure file loading to system memory. Loading of user application, kernel firmware, font and others must use User Loader. The loading process is secure by signing the files using ULD Key System. 4.1. ULD Key System The ULD Key System uses two key sets for securely managing the kernel updating and application downloading. Each key set contains two RSA key pairs.
PAGE 31
updating, the kernel CAP files must be “signed” via ULD User Key to get the user permission. For simple expression, we call the kernel CAP files generated by the manufacturer as “unsigned kernel CAP(s)” and call the kernel CAP files “signed” by the user later as “signed kenel CAP(s)”. Notes: 1. The kernel modules are encrypted by a random-generated 3DES key, which is retrieved from the Key Encryption Block of the CAP by ULD Manufacturer Key Encryption Key, not directly encrypted by ULD RSA Key. 2.
PAGE 32
4.1.2. ULD User Key ULD User Key are used to encrypt and sign the user/shared applications. In addition, they are as goalkeepers to prevent the system updating without user permission. This is done by the kernel CAPs which are encrypted and signed by the manufacturer having to perform the “signed’ action via ULD User Keys.
PAGE 33
4.2. File Signing 4.2.1. Signing Kernel Module Castles will release new version of kernel module in “unsigned” form. This files required to sign with ULD User Key before it can load to terminal. Castles Technology provideds a tool named “CAP Signing Tool” to perform this task. The CAP Signing Tool is located at: C:\Program Files\Castles\MP200\tools\Signing Tool  Run CAP Signing Tool (MP200)  Insert Key Card and select smart card reader Castles Technology Co., Ltd. Confidential • All Right Reserved.
PAGE 34
 Enter Key Card PIN  CAP Signing Tool is ready, press “Select MCI File” button to browse the file.  Output file will be located in “signed” folder. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 35
4.2.2. Signing User Files Following files are required to sign before load to terminal. This is to ensure the application data and codes confidential and integrity. The output file will be “CAP” file which is file format defined by Castles.  User application  User application data files  User application library  Font file  Share library  Share files  System setting  Key CAP (Manufacturer ULD Key Set) Castles Technology provided a tool named “CAP Generator” to perform this task.
PAGE 37
 CAP Generator is ready, select the correct Type from the list.  Press “Step 1: Select AP Executable File” to select file to sign. This is valid for all the files to sign. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 38
 Enter file details and press “Step 2: Sign Application” to sign the file. This is valid for all the files to sign.  The output file will be in a set. A “mci” file with one or more “CAP” files.CAP file contents the signed file binaries, where MCI file contents the list of CAP files. App.CAP App.mci Note: If user would like to load multiple set of signed file, create a new file with extension of “mmci”. Then put the mmci file contents with the list of mci file. MultiApp.mmci Castles Technology Co.
PAGE 39
4.3. File Loading There are several ways of loading file to MP200.  Download by User Loader  Download by user application  Download by Castles TMS User Loader is a tool provided by Castles Technology. It’s the formal way to download file to terminal. User may implement their own ways of updating application or files using CTOS API provided, CTOS_UpdateFromMMCI(). Castles TMS (CTMS or CASTLES Terminal Management System) is provided by Castles Technology.
PAGE 40
 Select COM port  Browse and select mci file or mmci file  Setup terminal to enter download mode  Press [0] button in Program Manager (PM)  Press [1] button to select “1. Download AP“  Press [1] button again to select download via RS232 or USB Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 41
 Press “Download” button to start. Note: To download using USB cable, terminal must enable CDC mode. Set USB CDC Mode to Y. SYS SETTINGS Key Sound : Y Exec DFLT AP: Y -AP Name USB CDC Mode: Y FunKeyPWD : N PMEnterPWD : N 2: Next Page Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 42
4.4. Changing ULD User Key User may change their ULD User Key Set stored in Key Card. Castles Technology provided a tool named “Secure Key Generator” to perform this task.  Run Secure Key Generator  Insert Key Card and select smart card reader  Enter Key Card PIN, default PIN is “1234”. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 43
 To change Key Card PIN, press “Update PIN” button. If not, please skip this steps.  Enter new PIN, enter new PIN again to confirm, then press [Enter] button to change PIN in Key Card. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 45
 To generate new user key set  Please generate the RSA key by yourself,thelength of the RSA key set should be 2048 (bits).  Copy RSA key components to RSA Key for Kenc in Secure Key Generator. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 47
 Click [Get Hash] button to calculate the hash value for key sets.  Please copy down all the values into a text file and keep in a safe place. You will need this if you need to create duplicate Key Card.  To generate the key CAP for the newly generated user key set, press [Make Key CAP File] button. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 48
 The output file will be located in the Secure Key Generator folder. SecureKeyGenerator key.mci key.cap  To update the newly generated key set to Key Card, press [Save to Card] button to write the key set to Key Card. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 49
5. Font Management 5.1. Loading New Font  Run FontManager.exe Located at C:\Program Files\Castles\Font Manager  Select font to download Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 50
 Press [Setting] button to configure terminal type.  Select VEGA5000, press [Save] button to save and return font manager.  Press [Generate] to create the font file. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 51
 Output file “Font.FNT” will be located at sub-directory named “Font” in “Font Manager” folder. Font Manager Font Font.FNT  Sign the file using CAP Generator, the type must set to “11 – Linux Font”.  Lastly, download the signed file (CAP file) to terminal using Loader. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 52
5.2. Custom Font User may create font they preferred for displaying or printing on terminal. There are two zone defined: Zone 0x00 ~ 0x7F – ASCII characters, you may replace with the font type preferred or your own language character set. Zone 0x80 ~ 0xFF – Free to use, you may use for symbols. Following steps demonstrate how to create a 12x24 font.  Run GLCD Font Creator  Select [File]  [New Font]  [Import An Existing System Font] Castles Technology Co., Ltd. Confidential • All Right Reserved.
PAGE 53
 Select the font needed, simply choose a font size. The final value of font size should be determine by the minimum pixel width. You may need to repeat this steps few times to find the best fit font size.  Set the import range from 0 to 127. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 54
 Check the minimum pixel width and height.  If the pixel width of the font size is larger than expected, then you have to repeat the previous steps to import font with smaller size.  Use the following buttons to adjust the font size to match with expected font size. Add columnonrigh t Removecolum nonleft Add column on left Removecolumn onright Add row on top Remove row on bottom Add row on bottom Castles Technology Co., Ltd. Remove row on top Confidential • All Right Reserved. Pg.
PAGE 56
 Remove comment “// Code for char “ from offset 0x00 to 0x1F. Remove empty line if found. Then click [Save] button to save to file. Remove Remove Remove Remove  Run Font Manager Tool.  Click [Setting] button Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 57
 Enter the file name, font id, and select the size.  Click [Create] button, and select the C file previously created using GLCD Font Generator. Castles Technology Co., Ltd. Confidential • All Right Reserved. Pg.
PAGE 59
 Use CAP Generator to conver the FNT file to CAP. Set type to [11 – Linux Font], press [Step 1] button select the FNT file. Then press [Step 2] to generate CAP file.  Download the font CAP file to terminal.  In terminal application, add following code to display message using the newly created font. CTOS_LanguageConfig(0xA000,d_FONT_12x24,0,d_FALSE); CTOS_LanguageLCDSelectASCII(0xA000); CTOS_LCDTPrintXY(1, 1, "ABCDEFGH"); Or print message using the newly created font.
PAGE 60
5.3. Using TrueType Font (TTF) TrueType Font (TTF) is supported in MP200. You may download the TrueType font preferred to terminal for displaying or printing. Following steps demonstrate how to use “Cooper Black” TrueType font.  Copy the TTF file needed to a empty folder. TTF COOPBL.TTF  Use CAP Generator to conver the TTF file to CAP. Set type to [11 – Linux Font], press [Step 1] button select the TTF file. Then press [Step 2] to generate CAP file.  Download the font CAP file to terminal.
PAGE 61
 In terminal application, add following code to display message using the newly added font. CTOS_LCDTTFSelect("COOPBL.TTF", 0); CTOS_LCDFontSelectMode(d_FONT_TTF_MODE); CTOS_LCDTSelectFontSize(0x203C); // 32x60 CTOS_LCDTClearDisplay(); CTOS_LCDTPrintXY(1, 1, "Hello World"); Or print message using the newly added font. CTOS_PrinterTTFSelect("COOPBL.
PAGE 62
6. FCC Warning Federal Communication Commission interference statement. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.