EZProx Contactless Reader User’s Manual Version 1.0 August 2006 http://www.castech.com.tw Doc.
EZPROX Contactless Reader User’s Manual V1.0 Table of Contents TABLE OF CONTENTS .................................................................................................................................... 1 REVISION HISTORY......................................................................................................................................... 2 WARNING ..................................................................................................................................
EZPROX Contactless Reader User’s Manual V1.0 Revision History Version Date Editor V1.0 2006.08.01 Mindy Castles Technology Co., Ltd. Description Created All Rights Reserved.
EZPROX Contactless Reader User’s Manual V1.0 WARNING Information in this document is subject to change without prior notice. No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of Castles Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners.
EZPROX Contactless Reader User’s Manual 1 V1.0 Introduction The description of EZProx Contactless Reader.
EZPROX Contactless Reader User’s Manual 3 V1.0 Power There are two ways to supply the power to the reader, please choose one of the follows: 9 By external adapter 9V/500mA (through DC Jack), please refer to 4.1 9 By RS232 Port1 (COM1) 5V/500mA, please refer to 4.2 9 By USB Port 5V/500mA,please refer to 4.4 4 Connector and PIN Assignment 4.1 DC Jack EZPROX DC Jack Cable AC In : Depends on local environment. DC Output : 9V/500mA 2.0mm DC Jack Head Inside :Plus/9V(+) Outside:GND(-) 4.
EZPROX Contactless Reader User’s Manual 4.2.2 4.3 4.4 V1.0 PIN Assignment RS232 Port2(COM 2) 4.3.1 Connector type Same as RS232 Port 1. 4.3.2 PIN Assignment Same as RS232 Port 1. USB Port 4.4.1 Connector type Standard Mini USB type A 4.4.2 PIN Assignment Castles Technology Co., Ltd. All Rights Reserved.
EZPROX Contactless Reader User’s Manual V1.0 5 Installation 5.1 Power and RS232 Cable 5.2 Card Holder Castles Technology Co., Ltd. All Rights Reserved.
EZPROX Contactless Reader User’s Manual 5.3 V1.0 45º Foot Stand User can direct put Ezprox on desk with 8º angle or install this stand to make EZPROX stand with 45º angle. Castles Technology Co., Ltd. All Rights Reserved.
EZPROX Contactless Reader User’s Manual 5.4 V1.0 SAM Insertion Step 1. Unscrew SAM Cover Step 2. Open SAM Cover Step 3. Insert SAM Card Step 4. Close SAM Cover Castles Technology Co., Ltd. All Rights Reserved.
EZPROX Contactless Reader User’s Manual 5.5 Placement Notice 6 LED Indicator 6.1 Front side V1.0 4 LEDs in front side. Castles Technology Co., Ltd. All Rights Reserved.
EZPROX Contactless Reader User’s Manual 6.2 V1.0 Rear side 4 LEDs in rear side. 6.3 LED’s Representation States The state of the LED indicators described as follows: z After EZPROX initialization and ready for transaction, the blue LED indicates terminal is ready to conduct a Contactless card ( PayPass , VisaWave , JCB or others ) ? transaction.