Quick Installation Guide

ManualsBrandsCastleNet Technology ManualsComputers & AccessoriesWireless Cable Gateway (Wi-Fi 6)

CBV390S5-AX5700 DOCSIS 3.1 Compliant

EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet

Package Contents

 1 * Cable Modem

 1 * AC Power Adapter (3.5A)

 1 * Quick Installation Guide

 1 * Ethernet (RJ-45) cable

Rear Panel and Hardware Connection

The following describes the proper steps for connecting your cable modem. Please be sure to follow

the steps in the sequence outlined below. Failure to do so could result in improper operation or failure

of your cable modem.

Step 3 Connecting to

the AC Adaptor

Step 1 Connecting the Coaxial

Cable

Step 4 POWER ON/OFF

button

Step 2 Connecting the

Ethernet Cord

Step 5 USB port

Step 6 Connecting the

Telephone Cord

Summary of content (8 pages)

PAGE 1
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet Quick Installation Guide Package Contents   1 * Cable Modem 1 * AC Power Adapter (3.5A)   1 * Quick Installation Guide 1 * Ethernet (RJ-45) cable Rear Panel and Hardware Connection The following describes the proper steps for connecting your cable modem. Please be sure to follow the steps in the sequence outlined below. Failure to do so could result in improper operation or failure of your cable modem.
PAGE 2
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet Step 1: Connect a cable by feeding the F-connector on the back of the cable modem. Ensure the center conductor of the 75 ohm coaxial cable is inserted directly into the center of the F-connector. Secure the coaxial cable by carefully threading the outer shell of the coaxial cable connector onto the F-connector in a clockwise direction until tight.
PAGE 3
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet Front Panel & LEDs There are 10 Light-Emitting-Diodes (LEDs) located on the front panel to indicate the status information of cable modem.
PAGE 4
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet LED NAME COLOR POWER Green MODE On Power Connected Off Power Failure or Disconnect Blinking DS US Green Green WLAN 2.
PAGE 5
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet Quick Installation Guide Cable Modem Key Features • • • • • • • • • • DOCSIS 3.1 Compliant DOCSIS/EuroDOCSIS 3.0 Backwards Compatible PacketCable 2.0 and EuroPacketCable 1.5 Compliant DOCSIS 3.1 2x2 OFDM(A) Channels DOCSIS 3.0 32x8 Channel Bonding Switchable Diplexer Wi-Fi 6 4x4 for 2.4GHz and 5GHz 1-port 2.5Gb Ethernet 4-Port Gigabit Ethernet 2-Port FXS • 1-Port USB 3.0 Cable Modem Specification Table 1.
PAGE 6
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet Quick Installation Guide Table 2. RF Upstream Specification (DOCSIS) Parameter Frequency Range Bonded Channels Modulation Value 5-85 / 5-204 MHz switchable DOCSIS 3.1: 2 (OFDM) DOSCIS 3.0: up to 8 4096 QAM (DOCSIS 3.1), 256 QAM, QPSK DOCSIS 3.1 : up to 2 Gbps Data Rate DOCSIS 3.0 : up to 200 Mbps Table 3. Electrical Specification Parameter Measured Value Input Voltage 12VDC/3.
PAGE 7
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet Quick Installation Guide Note to CATV System Installer "The EUT must be bonding the screen of the coaxial cable to the earth at the building entrance per ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable.
PAGE 8
CBV390S5-AX5700 DOCSIS 3.1 Compliant EMTA Gateway with Wi-Fi 6 & 2.5Gb Ethernet Quick Installation Guide ensure compliance with FCC emissions limits. Accessories connected to this device by the user must comply with FCC Class B limits. The manufacturer is not responsible for any interference which results from use of improper cables, or which results from unauthorized changes or modifications to the device.