S-Bus 2 Telemetry Link User Guide

ManualsBrandsCastle Creations ManualsAirplanesTelemetry Link S.BUS2

P/N: 010-0152-00

ITEMS NEEDED FOR SET-UP AND OPERATION:

• Compatible Futaba® transmitter/receiver (software update may be

required)

• Compatible Castle Creations ESC (software update may be required)

• Castle Link USB device

NOTES

EXPERIENCE THE ADVANTAGE OF

REAL-TIME DATA TELEMETRY BETWEEN

YOUR CASTLE

™

ESC AND TRANSMITTER.

Futaba and S.Bus are registered Trademarks of Futaba Corporation.

AIR PRODUCT COMPATIBILITY

ESC and

data point

Edge and

Edge Lite

Edge HV and

Edge HV Lite

Phoenix

Ice 2 HV

Phoenix Ice

and Ice Lite

Talon

Series

Battery Voltage

Battery Current

Motor Power

Output

RPM

BEC Voltage

ESC

Temperature

Battery Ripple

SURFACE PRODUCT COMPATIBILITY

ESC and

data point

Mamba

Monster X

Mamba XL X

Mamba

Micro X

Sidewinder

Micro 2

Battery Voltage

Battery Current

Motor Power

Output

RPM

BEC Voltage

ESC

Temperature

Battery Ripple

For additional product information and

compatible transmitter listing please scan the

QR code or visit our website at:

www.castlecreations.com/sbus2resources

Summary of content (2 pages)

PAGE 1
NOTES P/N: 010-0152-00 For additional product information and compatible transmitter listing please scan the QR code or visit our website at: www.castlecreations.
PAGE 2
CONFIGURING YOUR ESC FOR USE WITH YOUR NEW TELEMETRY LINK VEHICLE CONNECTION Visit www.castlecreations.com/downloads and make sure you have the most recent version of Castle Link software and ESC firmware. If this is your first time using the Castle Link, you can find additional resources at www.castlecreations.com/sbus2resources Follow the connection diagram below that applies to your Telemetry Link Set-Up. Additional connection resources can be found at www.castlecreations.