User's Manual

Casoda Truck Camera
3. Steps for usage
1. Connect camera to truck:
* Red cable connect with ACC12~36V.
* Black cable connect with GND.
2. Turn on the wifi connection settings in the
phone settings.
3. In the pop-up wlan/wifi connection setting
interface, refresh the search wifi signal.
4. Find and connect the wifi signal named
Casoda-WifiCamera_xxxxxx.
(Note: xxxxxx is a 6-digit device ID.)
5. When the cell phone prompts whether to
keep the wifi connected, choose to keep the
connection.
6. Return to the APP to use the wifi rearview
camera normally. When the connection is succ-
essful, the wifi button icon is displayed in green.
1
2 3
1. Download the App
1. iOS App Download
Method one:
Scan the IOS QR code in the user mannual
with camera or other scanning software,
enter the appstore , download and install
the Casoda_Truck application.
Method two:
Search for Casoda_Truck in the appstore,
then download and install.
2. Android Download
Method one:
Download the Android app using the scan-
ning software or browser that comes with
the Android phone to scan the correspond-
ing QR code on the user manual. After the
download is complete, click install.
Method two:
Search for Casoda_Truck in the Google Play,
then download and install.
Directory
1. Download the App........................1
2. Check compatibility.......................2
3. Steps for usage...............................3
4. Installation suggestions...............4
5. App instructions.............................5
6. Trouble shooting............................6
App Store
Google Play
User Manual
Thank you for purchasing Casoda product
If you have any problems during use,
please send a detailed description of
the problem (question, phone model,
system version, etc.) to
Email: [e-mail].
2. Check compatibility
Please check compatibilty befor installation.
For iPhone:
iPhone 6s and above are supported.
For android phone:
Please follow the below steps:
1. Download and install the Casoda_Truck app.
2. Enable the phone’s wifi/wlan.
3. Run the Casoda_Truck app.
4. If your phone support the camera, the app
will enter it is main intherface without any
prompt message.
5. If it is not supported, it will prompt that the
phone not support the device