User`s guide

31
■ MIDI Settings
• Select the “(1) Auto Search” check box when using a USB connection between the Instrument and computer. This will cause
the computer to automatically search for and connect to the Instrument.
• When using a MIDI connection between the Instrument and computer, clear the “(1) Auto Search” check box and configure
“(3) MIDI IN device” and “(4) MIDI OUT device” settings manually.
■ To adjust the MIDI OUT interval
1. Configure MIDI settings to connect the Instrument with the computer.
2. Press the “(5) Adjust MIDI OUT interval button”. In response to the confirmation message
that appears, press “Yes”.
This performs the adjustment process.
IMPORTANT! : The adjustment process can take up to two minutes.
• After the adjustment process is complete, a value will appear to the right of the “(5) Adjust MIDI OUT interval button”
indicating to how many milliseconds the interval has been adjusted.
• If interval calibration fails for some reason, the message “Calibration Failed” will be displayed. If this happens, it could
mean that Data Editor is not operating correctly. Check the connection between the Instrument and computer.
■ To configure folder settings
• Click the “(7) Data file folder path browse button” and then configure folder settings.
Configuring Settings