User`s guide
13
• For information about editable parameters, see the following items in the Instrument’s User’s Guide.
• MIDI: User’s Guide (Tutorial) “Other Useful Functions (Tutorial)”
• Sound Generator: User’s Guide (Tutorial) “Other Useful Functions (Tutorial)”
• Phrase Rec: User’s Guide (Basics) “Recording and Playing Back Phrases”
• General: User’s Guide (Basics) “System Settings”, User’s Guide (Tutorial) “Other Useful Functions (Tutorial)”
• The following items cannot be used with system setting screen: “(2) Data selector button”, “(3) Data name box”, “(6) Open
file button”, “(7) Save file button”, “(8) Save user data button”, “(9) Reset button”.
■ Selecting Instrument Data
This operation cannot be used with the “Mixer” or “System Setting” screen.
1.
Click “(2) Data selector button”.
• This will display the data selector dialog box.
2.
On the data selector dialog box that appears, select the desired data and then click [OK].
• This recalls the selected data and reflects it on the Instrument as well.
• “(2) Data selector button” shows the area number.
• This software stores edits for each individual preset data and user data.
• Changing a parameter will cause an exclamation mark (!) to appear to the left of the area number displayed by “(2) Data
selector button”.
• An exclamation point (!) to the left of area number on the data selector dialog box indicates data has been edited.
• To discard edits and restore preset data or user data, click “(9) Reset button”.
■ Opening a File
This operation cannot be used with the “Mixer” or “System Setting” screen.
1.
Click “(6) Open file button”.
• This displays a file selection screen.
2.
Select the file you want to open.
System Setting
Operation Procedures