GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THE UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has bean tested and found to comply with the omits or a Class B digital device. pursuant to Part 150th the FCC Rules.
A Caution AC Adapter » Do riot Eave the power cord near stoves or other sabras of intense heat. Doing 50 can melt power cord insulation and create the dangs of fire and electrical shock. » When unplugging the parer cord from the wall socket, grasp the plug. Neva pull on the cord itself. Doing so can damage the prows cons and create the danger of tire and electrical shook, @ » Whenever leaving the unit unattended for long periods, bs sure 1o unplug it farm the wall socket, « Whenever moving the unit.
Part Character Size, Text Effects and Character Styles .. Character Size oo 3 To rehang the character size Text Effects To specify a ext affect Character Styles . T specify a character style Part§ Printing Printing & Tape To print a tape Startup Printing To print a stamp tape Frames To specify & frame. Zircon image Printing . To turn mirror image printing on and off Other Printing Features and Operations Auto Feed To turn auk feed on and off . o manually feed tape ..
Label Printer Menus Label Printer operation is designed t be as simple as possible, thanks to on screen menus that you can use to seismic the seedlings you need. Each mine i described in detail in the sections that follow in this manual, but note the following general points when using them. « The inert that is underlined in a mean s the one that is currently selected.
Important! « Never try to push the taps back into the cassette. Once taps is aut of the cassette, tiara is no way to wind it back in. Trying to do 80 can cause operational problems with the Les! Prints. » The fallowing are the tape widens that can tie used with this printer; 8mm, Sma, 12mm, 18ma, To load a tape cartridge 1. Make sure that the Label Printer is muted oft 2. Open the back cover.
+ Manual feed indicator Iris indicator appears when you are using manual ford instead of auto feed Alta teds is in effect when this indicator is not on the display. Important « After you finish printing where using manual feed, ba sure 1o always press FUNCTION and then PRINT (FEED) to teed the tape before cutting i, if you don't you will aut off part of the printed text. « 6mm tape indicator This indicator appears when you use the procedure on page 8 to specify you are using 6mm tape.
2. Input the new characters (XYLEM. « outlining he new characters causes them to be invigorated at the curse position. The existing characters ars propertied up to make o for the new characters, To change existing characters to different ones Example: To change the text “ABRADE” to “XYZDEF" 1. With the original text an the display, use dither the BS key or DEL key to delete the characters to be changed (AB. « Remember 1o use the contact cursor location for the key you plan 10 use to delta tha characters.
. Use <€ ant P 10 move the cursor (o e style you want t use, . When the cursor is located under the styles you want to spicily, press SET to select it and re( tum to the text display. Note « You contd also par farm the above procedure in reverse, specifying the character style first and then inputting the text. [Banks Printing This part of the manual includes ali the information you need to print tapes.
Auto Feed You can turn the Labile! Printer's auto feed feature on and oft, When auto fetid is on, the Label Printer automatically feeds the tape abaft 16.9mm at the beginning and end of each print operation. This creates identical margins on both sides of your text. Portent + Alter you finish preening when using manual feed, ba sure 1o always prods FUNCTION and then PRINT (FEED) to feed ihe tape before cutting it You don't you will eut of part of the printed text. o 2.
'Part 8 Reference This section contains information abut the Laval Printer that you 6an Lse as referee when you need it Cleaning the Printer Head and Roller A dirty printer head and rifler can result in poor printing quality. i you have problems with print quality, use the following procedure to clean the printer head and roller, To clean the printer head and offer . Make sure the Label Printer is fumed off, 2, “Tum over the Label Prater, and pane the back cover while pressing down on s look. 3.
ik ribbon e bang tod frontier tame cu tint along with the tape; » Using Labels Error Messages Passionless Cause Action Patel will ol grader to Airspace Message Prohibit Dauphins ‘Action: Ink ribber cassette loaded while the ink ribbon is shack, Removal the ink ribbon cassette and check to make sure the Ink ribbon is not broken. Nex, ke up any slack in the ink ribbon and then reload the tape cartridge.