User manual

26
Using the Stylus Retaining Cord
Use the procedure below to attach the stylus retaining cord.
1 Thread the cord through the hole at the top of the
stylus.
2 Thread the other end of the cord through the loop.
Attaching the Neck Strap and Stylus
Use the procedure below to attach the neck strap or stylus to the strap holes.
There are 3 strap holes in the terminal (see pages 13 to 17). Attach the hand strap or stylus in
the position that makes it easiest for you to use the terminal.
The illustration shows the stylus. Use the same procedure to attach the neck strap.
Precautions for Use
• If you attach the stylus to the strap hole on the barcode reader side of the terminal,
take care to keep the stylus and its retaining cord out of the shot when using the
camera.