User Manual
Table Of Contents
- Contents
- Establishing a Network Connection Between a Computer and the Projector
- Configuring Projector Network Settings
- Using a Computer to Configure Projector Network Settings
- Preparing for C-Connection
- Network Projecting a Computer Screen Image (Using C-Connection)
- C-Connection Details
- Advanced Operations
- Ports Used for TCP/UDP
39
Advanced Operations
This section explains the advanced operations below, which can be performed using a terminal
(computer or smart device) that is connected to the projector over a network.
Computer control, or projector control of the start or stop of projection from multiple terminals
connected to the projector over a network (Moderator Function)
Computer control of projector operations (Projector Remote)
Remote control of a computer from a smart device via the projector (PC Remote)
When there are network connections between the projector and multiple terminals (computers and/or
smart devices), you can use the Moderator function to control which terminal’s screen is projecting.
To use a computer to control projection from multiple terminals
1.
Use the computer to display the projector’s Web Service page (page 12).
2.
Input the password into the “Moderator” box, and then click the [Login] button.
The initial default password is: moderator.
If login is successful, the Moderator page will appear and the user names of the terminals
connected to the projector will appear in the list.
Using the Moderator Function