User Manual
Table Of Contents
- Contents
- Establishing a Network Connection Between a Computer and the Projector
- Configuring Projector Network Settings
- Using a Computer to Configure Projector Network Settings
- Preparing for C-Connection
- Network Projecting a Computer Screen Image (Using C-Connection)
- C-Connection Details
- Advanced Operations
- Ports Used for TCP/UDP
16
Login Options
Login Settings let you specify the login code for projector connection from C-Connection on a
computer or MirrorOp Presenter on a smart device. You can also use it to display connection
information on the projection screen.
* When the projector is connected with a computer using C-Connection or with a smart device using
MirrorOp Presenter.
Projector Setting Items
Login Settings
Use this item: To do this:
Login Code Options Specify whether or not to require login code input when connecting to the projector
from a terminal.*
Disable (initial default): Login code input not required.
Random: Login code input required. A random four-digit code is generated for the login
code whenever the number of users that are network connected to the projector
becomes zero.
Fixed: Login code input required. After selecting this option, be sure to input a text
string to be used as the login code into the “Login Code” input box.
Login Code If you selected “Fixed” under “Login Code Options”, input a four-character string into
this input box. You can use numerals or alpha characters (upper case or lower case).
Connection information Specify whether to show or hide connection information (login code, SSID, projector
name, IP address) in the projected image.
Enable (initial default): Show connection information when any event below occurs.
When a terminal connects with the projector*
When network projection from a terminal to the projector starts
When the [Show Login Code] button (page 40) is clicked
Disable: Hide connection information. Even if this setting is selected, connection
information is shown when the user list screen (page 41) is projected.
Note
The login code is not displayed when “Disable” is selected for the “Login Code
Options” setting.
The SSID does not appear in the Client mode (page 18).
Display Duration Specify for how many seconds connection information should be shown in the
projected image. You can input a value up to 300 (Initial Default: 10).
Even if “Enable” is specified for the “Connection information” setting, connection
information will not be shown in the projected image if you input 0 here.