CTX5000_3000_es_Cover1-4.fm 1 ページ 2018年2月15日 木曜日 午後4時59分 CT-X5000 CT-X3000 EN/ES USER’S GUIDE Please keep all information for future reference. Safety Precautions Before trying to use the Digital Keyboard, be sure to read the separate “Safety Precautions”. This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.
CTX5000_3000_EN.book 3 ページ 2018年2月26日 月曜日 午後3時56分 FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Declaration of Conformity Model Number: CT-X5000/CT-X3000 Trade Name: CASIO COMPUTER CO., LTD. Responsible party: CASIO AMERICA, INC. Address: 570 MT.
CTX5000_3000_EN.book 2 ページ 2018年2月26日 月曜日 午後3時56分 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) Contents General Guide EN-4 Preparing the Music Stand . . . . . . . . . . . . . . . . . . . EN-7 Returning the Digital Keyboard to Its Factory Default Settings . . . . . . . . . . . . . . . . . EN-7 Preparing a Power Supply EN-8 Using the AC Adaptor . . . . . . . . . . . . . . . . . . . . . . . EN-8 CT-X3000: Using Batteries . . . . . . . . . . . . . . . . . . .
CTX5000_3000_EN.book 3 ページ 2018年2月26日 月曜日 午後3時56分 Contents Creating an Auto Accompaniment (User Rhythm) Reference EN-76 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . .EN-126 Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . .EN-128 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-130 DSP Effect List . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-132 Digital Keyboard Sound Source Configuration and MIDI Channel Assignment . . . . . . .
CTX5000_3000_EN.book 4 ページ 2018年2月26日 月曜日 午後3時56分 General Guide • All of the illustrations in this manual show the CT-X5000. 3 1 bl bm 2 4 5 67 cl bo cm bp bq br bs bt ck 8 9 bk cq cn co cp cr cs dk ct dl dm dn do dp dq dr el dt bn ek ds em eo en ep en eq eo CT-X5000 CT-X3000 • Some of the button names shown here include the $ mark. This indicates that you need to long-press the button to perform its operation.
CTX5000_3000_EN.book 5 ページ 2018年2月26日 月曜日 午後3時56分 General Guide • This manual uses the numbers and names below to refer to buttons, keys, and controllers.
CTX5000_3000_EN.
CTX5000_3000_EN.
CTX5000_3000_EN.book 8 ページ 2018年2月26日 月曜日 午後3時56分 Preparing a Power Supply Your Digital Keyboard uses an AC adaptor for power. • Though the CT-X3000 supports battery operation, use of an AC adaptor is generally recommended. Using the AC Adaptor Make sure that you use only the AC adaptor specified for this Digital Keyboard. Use of a different type of AC adaptor can cause malfunction.
CTX5000_3000_EN.book 9 ページ 2018年2月26日 月曜日 午後3時56分 Preparing a Power Supply CT-X3000: Using Batteries You can use six D-size batteries for power. Turning Power On or Off 1. Connect the Digital Keyboard to a power supply. • Be sure to turn off power before loading batteries. • It is up to you to prepare six commercially available batteries. Do not use oxyride batteries or any other nickel based batteries. 1. Open the battery cover on the bottom of the Digital Keyboard.
CTX5000_3000_EN.book 10 ページ 2018年2月26日 月曜日 午後3時56分 Preparing a Power Supply Auto Resume While Auto Resume is turned on, the current settings of the items described below are retained even when power is turned off (as long as power continues to be supplied to the Digital Keyboard, and power is turned off normally by pressing 1P (power) or by triggering of Auto Power Off).
CTX5000_3000_EN.book 11 ページ 2018年2月26日 月曜日 午後3時56分 Connecting to Audio Equipment Digital Keyboard Audio Output Your Digital Keyboard outputs audio from its built-in speakers and/or the PHONES jack. (CT-X5000: Also outputs audio from the LINE OUT jacks.) • There will be an indicator mark next to [SPEAKER] while built-in speaker output is enabled.
CTX5000_3000_EN.book 12 ページ 2018年2月26日 月曜日 午後3時56分 Connecting to Audio Equipment Outputting Keyboard Notes to Audio Equipment You can connect audio equipment or a music amplifier to the Digital Keyboard and then play through external speakers for more powerful volume and better sound quality. CT-X5000: To connect an external device to the Digital Keyboard’s LINE OUT jacks Connection requires commercially available connecting cords, supplied by you. Audio amplifier AUX IN jacks, etc.
CTX5000_3000_EN.book 13 ページ 2018年2月26日 月曜日 午後3時56分 Connecting to Audio Equipment Playing an External Device from the Digital Keyboard Connection requires commercially available connecting cords, supplied by you. • The connecting cords should have a stereo mini plug on one end and a plug that matches the configuration of the external device on the other end. • Turn off the Digital Keyboard when making connections.
CTX5000_3000_EN.book 14 ページ 2018年2月26日 月曜日 午後3時56分 Operations Common to All Modes About this manual Unless otherwise specifically noted, all of the procedures in this manual assume that the Digital Keyboard is in its initial power on state (immediately after you turn on power). If you run into problems with a procedure, turn keyboard power off and back on, and then try performing the procedure again. ■ Using the bl Dial You can also change a displayed number or value by rotating the dial.
CTX5000_3000_EN.book 15 ページ 2018年2月26日 月曜日 午後3時56分 Operations Common to All Modes 4 CATEGORY Button The many tones of the Digital Keyboard are divided into 20 categories to help make it possible for you to find a particular tone quickly and easily. You can use the 4 CATEGORY button to select the last tone you selected in a category. Under initial default settings, pressing 4 CATEGORY will select the first tone in a category. • The example below shows how to select a tone using 4 CATEGORY.
CTX5000_3000_EN.book 16 ページ 2018年2月26日 月曜日 午後3時56分 Operations Common to All Modes To modify characters 1. Use the [1] (V) and [3] (W) bm number keys to move the cursor to the position of the character you want to change. 2. Use bn [–] and [+] to change the character. • Repeat steps 1 and 2 as required. • Input of the characters shown in the table below is supported when saving a file to a USB flash drive.
CTX5000_3000_EN.book 17 ページ 2018年2月26日 月曜日 午後3時56分 3. Use bn [–] and [+] or the bl dial to change the Touch Response setting value. This operation scrolls through the available Touch Response settings: Off, Light, Normal, and Heavy. Since these are Touch Response settings, the [FUNCTION] indicator flashes while they are displayed. Flashing L i gh t Setting value number Listening to Demo Play 1. Press 5 TONE and 6 RHYTHM at the same time.
CTX5000_3000_EN.book 18 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard Selecting a Tone Your Digital Keyboard comes with a large collection of tones. Select a tone and play something on the keyboard to see what it sounds like. CT-X5000: To use the TONE Category buttons to select a category • You can use the eo TONE Category buttons to quickly and easily navigate between categories. en TONE GROUP SELECT button To select a tone 1. Press 5 TONE. This displays (tone indicator).
CTX5000_3000_EN.book 19 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard Sounding Multiple Tones (Layer and Split) You can split the keyboard into left and right area and assign different tones to each area, and also layer two tones to play at the same time. Split and layer can be used at the same time, which means that you perform with up to four keyboard parts (UPPER 1, LOWER 1, UPPER 2, LOWER 2) at the same time as shown in the illustration below.
CTX5000_3000_EN.book 20 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard To move the keyboard split point 1. Hold down dp SPLIT until “Split Pt” is displayed. 2. Use bn [–] and [+] or the bl dial to specify the name of the note (the lowest note of the desired UPPER part) where you want the split point to be. • You can also specify the split point by holding down dp SPLIT and pressing the key where you want the split point to be. • This displays the specified current split point as shown below.
CTX5000_3000_EN.book 21 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard To use split and layer together 1. Perform steps 1 through 3 under “To split the keyboard between two tones (Split)” (page EN-19). 2. Perform the procedure below to layer two UPPER part tones. (1) Press dq UPPER LAYER and confirm that the [U2] indicator is displayed. (2) Select the tone you want to assign to UPPER 2. 3. Perform the procedure below to layer two LOWER part tones.
CTX5000_3000_EN.book 22 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard Selecting an Effect for a Tone (Reverb, Chorus, Delay) Your Digital Keyboard includes reverb, chorus, and delay effects, which you can use to enhance the sound of tones. ● Reverb (REVERB) Reverb simulates ambient spaces, such as a room or hall. ● Chorus (CHORUS) Chorus adds a rich, shimmering quality to a sound. This digital keyboard applies a preset chorus setting that is suitable for each tone.
CTX5000_3000_EN.book 23 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard ■ CT-X3000 Reverb Effect List Setting Value ■ CT-X5000 Setting Value Setting Type Display 1 Off Off 2 Room 1 Room 1 3 Room 2 Room 2 4 Room 3 Room 3 5 Room 4 Room 4 6 Room 5 Room 5 7 Room 6 Room 6 8 Room 7 Room 7 9 Room 8 Room 8 10 Room 9 Room 9 11 Large Room 1 L.Room 1 12 Large Room 2 L.
CTX5000_3000_EN.
CTX5000_3000_EN.book 25 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard ■ CT-X3000 Setting Value Using Equalization Setting Type Display You can use equalization to select from among presets that boost or cut specific frequency ranges. The CT-X5000 also includes a four-band equalizer that allows user-configured settings (User Equalizer).
CTX5000_3000_EN.book 26 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard CT-X5000: To configure User Equalizer settings 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “User EQ”, and then press [6] (ENTER). 3. Configure settings for reach frequency range. (1) Use the [1] (V) and [3] (W) bm number keys to display the menu of the range you want to adjust.
CTX5000_3000_EN.book 27 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard Using the Metronome The metronome sounds a regular tone to mark time. Use the metronome when you want to practice playing at a regular tempo. To start or stop the metronome 1. Specify the time signature. • You can specify a time signature numerator (0 to 16) and denominator (4 or 8). (1) Hold down ct METRONOME until “BeatNume” is displayed.
CTX5000_3000_EN.book 28 ページ 2018年2月26日 月曜日 午後3時56分 Playing on the Keyboard 2. To turn the arpeggiator off, press do AUTO HARMONIZE/ARPEGGIATOR. This causes the [ARPEGGIATOR] indicator to disappear. To select an arpeggiator type 1. Perform the procedure under “To turn on the arpeggiator” and confirm that the [ARPEGGIATOR] indicator is displayed.
CTX5000_3000_EN.book 29 ページ 2018年2月26日 月曜日 Changing Keyboard Response to Touch Pressure (Touch Response) Touch Response alters tone volume in accordance with keyboard pressure (speed). This provides you some of the same expressivity you get on an acoustic piano. To change Touch Response sensitivity 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “Touch”. 3. Use bn [–] and [+] or the bl dial to change the setting value.
CTX5000_3000_EN.book 30 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds To connect a pedal to the fo PEDAL1 jack 1. Connect a pedal to the fo PEDAL1 jack. 2. Press bk FUNCTION. 3. Use the [1] (V) and [3] (W) bm number keys to display “Cntrller”, and then press [6] (ENTER). 4. Use the [1] (V) and [3] (W) keys to display “Pedal”, and then press [6] (ENTER). This displays “Pd1Efect”. This is the Pedal 1 function selection mode. 5. Use bn [–] and [+] or the bl dial to change the setting value.
CTX5000_3000_EN.book 31 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds 7. Depending on the selected pedal type, perform one of the operations below. Y Foot Switch Pedal Select the pedal effect. (1) Use the [1] (V) and [3] (W) bm number keys to display “Pd2Efect”. (2) Use bn [–] and [+] or the bl dial to change the setting value. • For details about pedal effects that correspond to each setting value, see the “Pedal Function List” (page EN-31).
CTX5000_3000_EN.book 32 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds ■ Connectable Expression Pedals You can connect a commercially available expression pedal that satisfies the specifications below to the fp PEDAL2/ EXPRESSION jack. Use of a pedal whose operation has been confirmed (see below) is recommended. • Maximum resistance value: 10kΩ±20% to 50kΩ±20% • Note that pedal polarity depends on the manufacturer.
CTX5000_3000_EN.book 33 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds Using the Pitch Bend Wheel You can use the pitch bend wheel to slide the pitch of notes smoothly upwards and downwards. This capability makes it possible to reproduce saxophone and electric guitar choking effects. 1. While playing a note on the keyboard, rotate the ek PITCH BEND wheel on the left of the keyboard upwards or downwards. The amount the note bends depends on how much you rotate the pitch bend wheel.
CTX5000_3000_EN.book 34 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds 4. Use bn [–] and [+] to select the dt MODULATION/ASSIGNABLE operation. To select this operation: Select this setting value: Enable the function assigned to the button only while the button is pressed. 1 Moment Toggle the function between enabled and disabled each time the button is pressed. 2 Toggle • The indicator lamp to the left of the button is lit when the assigned function is enabled, and unlit when it is disabled. 5.
CTX5000_3000_EN.book 35 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds 5. Use bn [–] and [+] or the bl dial to specify a DSP module. 6. Use the [1] (V) and [3] (W) bm number keys to display “DSPParam” (the target DSP parameter). This displays the name of the first parameter of the DSP module you selected in step 5. Parameter number Parameter name EQ G a i n 7. Use bn [–] and [+] or the bl dial to display the parameter you want to change when dt MODULATION/ASSIGNABLE is pressed. 8.
CTX5000_3000_EN.book 36 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds To configure the octave shift amount setting for each part 1. Press dr OCTAVE. Number of octaves shifted. 0 (zero) indicates no shifting, 1 indicates one octave up, and –1 indicates one octave down. You can specify a value in the range of –3 to +3. Keyboard part. For details about keyboard parts and how they are indicated, see “Keyboard Part Indicators” (page EN-19). Indicates the octave shift setting screen. 2.
CTX5000_3000_EN.book 37 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds Performing Master Digital Keyboard and Individual Part Pitch Adjustment Use the procedure below to perform master Digital Keyboard pitch adjustment. When making adjustments, the A4 note (A above middle C) is the tuning standard. To fine tune a pitch (Tuning) 1. Press bk FUNCTION. 2.
CTX5000_3000_EN.book 38 ページ 2018年2月26日 月曜日 午後3時56分 Controlling Sounds To select the temperament of keyboard play 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “Scale”, and then press [6] (ENTER). This displays “Type”. 3. Use bn [–] and [+] or the bl dial to change the setting value. • For details about the scales that corresponds to each setting value, see the “Scale List” (page EN-37). 4. Press the [3] (W) bm number key to display “Root”. 5.
CTX5000_3000_EN.book 39 ページ 2018年2月26日 月曜日 午後3時56分 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) Your Digital Keyboard comes with 30 built-in songs.* You can use built-in songs for listening enjoyment, or you can mute the part of one hand of the piano part and play along for practice. You can also connect a USB flash drive to the Digital Keyboard and use the same operations as those for built-in songs to play MIDI files (SMF or CMF).
CTX5000_3000_EN.book 40 ページ 2018年2月26日 月曜日 午後3時56分 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) To select a tone for keyboard play in the Song Bank mode 1. In the Song Bank mode, press 5 TONE. This displays (tone indicator). (song bank indicator) will also remain on the display. 2. Use the bm number keys, bn [–] and [+], or the 3. When playback reaches the beginning of the section you want to loop, press bq A-B.
CTX5000_3000_EN.book 41 ページ 2018年2月26日 月曜日 午後3時56分 Playing a Built-in Song or a Song on a USB Flash Drive (Song Bank Mode) 4. Use bo PART SELECT to select a part to practice. • Each press of bo PART SELECT causes the indicators below to appear or disappear in accordance with the type of song that is selected.
CTX5000_3000_EN.book 42 ページ 2018年2月26日 月曜日 午後3時56分 Playing Back a Song from a USB Flash Drive You can use the same operations as those for built-in songs to play back MIDI files* stored in the MUSICDAT folder on a USB flash drive. For information about the procedure for saving a MIDI file to a USB flash drive, see “Using a Computer to Copy General Song Data to a USB Flash Drive” (page EN-123).
CTX5000_3000_EN.book 43 ページ 2018年2月26日 月曜日 午後3時56分 5. To stop playback, press 8 AUDIO PLAY/ STOP. This causes the [AUDIO PLAY] indicator to disappear. 6. To exit the Audio Mode, press 7 SONG BANK (AUDIO). This causes the [AUDIO] indicator to disappear. • Playback of an audio file continues even if you exit the Audio Mode. In this case as well, press 8 AUDIO PLAY/ STOP to stop playback. • You can loop playback of an audio file.
CTX5000_3000_EN.book 44 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) CT-X5000: To use the RHYTHM Category buttons to select a category Using Auto Accompaniment To play an Auto Accompaniment • You can use the eq RHYTHM Category buttons to quickly and easily navigate between categories. ep RHYTHM GROUP SELECT button 1. Use the procedure under “Selecting a Rhythm” (page EN-43) to select the rhythm you want to sound. 2.
CTX5000_3000_EN.book 45 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) 5. Use the dk TEMPO [w] and [q] buttons to change the tempo setting. Tempo Measure Beat • You can also configure the tempo setting before starting Auto Accompaniment. • For information about the tempo setting, see “Changing Auto Accompaniment Speed (Tempo)” (page EN-46). 6.
CTX5000_3000_EN.book 46 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) Changing Auto Accompaniment Speed (Tempo) There are two ways to change the tempo. • Specifying a beats-per-minute value • Tapping a beat with the dl TAP TEMPO button (tap input) Note Value Indicator and Tempo Value The current tempo value setting is always displayed in the upper right corner of the display. To change the displayed note value 1. Long-press dl TAP TEMPO until the displayed note value changes.
CTX5000_3000_EN.book 47 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) Creating a Song with an Auto Accompaniment (Accompaniment Pattern) Generally, the progress of a musical piece starts with an intro, transitions to verses that are interspersed with interludes and other changes, and then returns to the main theme before reaching an ending.
CTX5000_3000_EN.book 48 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) Starting and Stopping Auto Accompaniment with the Accompaniment Keyboard (Synchro Start, Synchro Stop) You can configure settings so Auto Accompaniment starts as soon as you play a chord on the accompaniment keyboard (synchro start) and stops as soon as you release all of the keys on the accompaniment keyboard (synchro stop). To use Synchro Start to start Auto Accompaniment play 1.
CTX5000_3000_EN.book 49 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) ■ CASIO CHORD ■ FINGERED With CASIO CHORD, you can use simplified fingerings to play the four types of chords described below. With these input modes, you play chords on the accompaniment keyboard using their normal chord fingerings. Some chord forms are abbreviated, and can be fingered with one or two keys. See page A-2 for information about chords that are supported and how they are fingered on the keyboard.
CTX5000_3000_EN.book 50 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) To select a chord fingering mode Accompaniment Keyboard Range Setting 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “ChordMod”. 3. Use bn [–] and [+] or the bl dial to change the setting value. • The table below shows the relationship between setting values and chord fingering modes.
CTX5000_3000_EN.book 51 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) ● Chord Point The illustration below shows a keyboard with a chord point specified. The LOWER part keyboard range is not affected in this case. Chord Point To specify the chord point 1. Hold down dp SPLIT until “Split Pt” is displayed. 2. Use the [1] (V) and [3] (W) bm number keys to display “Chord Pt”. 3. Use bn [–] and [+] or the bl dial to specify the note name of the chord point (page EN-51).
CTX5000_3000_EN.book 52 ページ 2018年2月26日 月曜日 午後3時56分 Using Auto Accompaniment (Rhythm Mode) To turn the Chord Input Priority Mode on or off 1. Hold down dp SPLIT until “Split Pt” is displayed. 2. Use the [1] (V) and [3] (W) bm number keys to display “CdPrior”. 3. Use bn [–] and [+] to switch the Chord Input Priority Mode between on and off. • While Chord Input Priority Mode is turned on, the LOWER part tone does not sound in the area where the LOWER part keyboard and accompaniment keyboard overlap.
CTX5000_3000_EN.book 53 ページ 2018年2月26日 月曜日 4. When the setting is the way you want, longpress the [4] (EXIT) bm number key to exit the setting screen. ■ Auto Harmonize Type List Type number Type Name Description 01 Duet 1 Adds close (separated by 2 to 4 degrees) 1-note harmony below the melody note. 02 Duet 2 Adds open (separated by more than 4 to 6 degrees) 1-note harmony below the melody note. 03 Country Adds country style harmony. 04 Octave Adds the note from the next lower octave.
CTX5000_3000_EN.book 54 ページ 2018年2月26日 月曜日 午後3時56分 • With some music presets, selecting a number in step 3 causes the [SYNC START] indicator to start to flash, indicating that the Digital Keyboard is in synchro start standby (page EN-48). If this happens, Auto Accompaniment can be started by playing something on the keyboard instead of pressing ck START/STOP.
CTX5000_3000_EN.book 55 ページ 2018年2月26日 月曜日 午後3時56分 Using Phrase Pads Starting and Stopping Phrase Playback Before playing back a phrase, you must first change to the phrase set where the phrase is located if it is not already assigned to the phrase pads. For details, see “Changing to Another Phrase Set” (page EN-54). To stop playback of all phrases 1. To stop phrase playback while a multiple phrases are playing, press cr STOP.
CTX5000_3000_EN.book 56 ページ 2018年2月26日 月曜日 午後3時56分 Using Phrase Pads Configuring Phrase Playback Setups Phrase playback setups control how the phrase assigned to a phrase pad (1 to 4) plays when you press the pad. The setups you configure here are recorded to the corresponding pad. To configure a phrase playback setup 1. Specify the phrase pad whose playback setup you want to configure. (1) Press bk FUNCTION and confirm that the [FUNCTION] indicator is displayed.
CTX5000_3000_EN.book 57 ページ 2018年2月26日 月曜日 午後3時56分 Using Phrase Pads 6. Press a cq PHRASE PAD button ([P1] to [P4]) Recording a Phrase A phrase is created by recording notes played manually on the keyboard. Up to 16 measures can be specified for the length of the phrase to be recorded, and up to approximately 1,000 notes can be recorded. As with playback, recording also loops back to the first measure when the end of the number of measures specified for the phrase is reached.
CTX5000_3000_EN.book 58 ページ 2018年2月26日 月曜日 午後3時56分 Using Phrase Pads Configuring Phrase Recording Settings If you change phrase recording settings, those settings will be in effect for the subsequent recording operation as well. Change the recording settings as required when recording a new phrase. To configure phrase recording settings Phrase Recording Setting Items Item Name (Display) Specifies the length (number of measures) of the phrase to be recorded.
CTX5000_3000_EN.book 59 ページ 2018年2月26日 月曜日 午後3時56分 Using Phrase Pads To delete a phrase set 1. Perform the procedure 1 through 3 under “To change the phrase set” (page EN-54) to select the number of the phrase set you want to delete. 2. Long-press 8 RECORD/STOP until “Copy” is displayed. 3. Use the [1] (V) and [3] (W) bm number keys to display “Clear”, and then press [6] (ENTER). This displays “Sure?” 4. Press bn [+] (YES) to delete or bn [–] (NO) to cancel the delete operation.
CTX5000_3000_EN.book 60 ページ 2018年2月26日 月曜日 午後3時56分 Using Phrase Pads To copy a phrase 1. Use the procedure under “To enter the Phrase Editing mode” (page EN-59) to enter the Phrase Editing mode. 2. Use the [1] (V) and [3] (W) bm number keys to display “Copy”, and then press [6] (ENTER). This displays “Src Set”. 3. Use bn [–] and [+] or the bl dial to specify the number of the phrase set that contains copy source phrase, and then press [6] (ENTER).
CTX5000_3000_EN.book 61 ページ 2018年2月26日 月曜日 午後3時56分 Using Phrase Pads To quantize a phrase To key shift a phrase 1. Use the procedure under “To enter the Phrase 1. Use the procedure under “To enter the Phrase Editing mode” (page EN-59) to enter the Phrase Editing mode. Editing mode” (page EN-59) to enter the Phrase Editing mode. 2. Use the [1] (V) and [3] (W) bm number keys 2. Use the [1] (V) and [3] (W) bm number keys to display “Quantize”, and then press [6] (ENTER).
CTX5000_3000_EN.book 62 ページ 2018年2月26日 月曜日 午後3時56分 To configure phrase mixer settings 1. Use the procedure under “To enter the Phrase Editing mode” (page EN-59) to enter the Phrase Editing mode. 2. Long-press 9 PART (MIXER) until the [MIXER] indicator appears. This displays the [KEYBOARD] indicator and mixer part indicator. • Mixer part indicators through correspond to phrase numbers 1 through 4. 3.
CTX5000_3000_EN.book 63 ページ 2018年2月26日 月曜日 午後3時56分 Muting Specific Parts (Part Mode) 2. Use bn [–] and [+] to select the part group of the part you want to turn on or off. • For example, display the [RHYTHM] indicator. While the [RHYTHM] indicator is displayed, you can turn each Auto Accompaniment part on or off. The mixer part indicator numbers that correspond to the currently sounding Auto Accompaniment will be shown on the display. Mixer Part Indicators (Turned on parts displayed.
CTX5000_3000_EN.book 64 ページ 2018年2月26日 月曜日 午後3時56分 2. Select the part group whose mixer settings you Using the Mixer want to configure. Your Digital Keyboard produces Auto Accompaniment and keyboard play notes using multiple parts. You can use the mixer function to make fine-adjustments to the volume, effect level, and other settings for each of these parts. • You can quickly and easily mute and unmute parts. For details, see “Muting Specific Parts (Part Mode)” (page EN-62).
CTX5000_3000_EN.book 65 ページ 2018年2月26日 月曜日 午後3時56分 Using the Mixer 6. To exit the Mixer mode, press the [4] (EXIT) bm number key. • The displayed, flashing, and not displayed status of mixer part indicators depends on the part on/off status in the Part Mode. For details, see “Muting Specific Parts (Part Mode)” (page EN-62). To select parts with the bm number keys 1.
CTX5000_3000_EN.book 66 ページ 2018年2月26日 月曜日 午後3時56分 Using the Mixer ● SONG SYSTEM Part Group These are the parts of the system track in songs recorded with the MIDI recorder. Part Number Corresponding Part 1 UPPER 1 2 UPPER 2 3 LOWER 1 4 LOWER 2 Advanced Mixer Settings Setting Items for Each Part Group Initial default setting values are indicated by an asterisk (*).
CTX5000_3000_EN.book 67 ページ 2018年2月26日 月曜日 午後3時56分 To sound only a selected part 1. Perform steps 1 through 4 under “To configure mixer settings” (page EN-64). 2. To sound only the part whose setting is being configured, press the [6] (ENTER) bm number key. This causes the mixer part indicator of the part whose setting is being configured, the level indicator above it, and marks to the left and right of the level indicators to flash.
CTX5000_3000_EN.book 68 ページ 2018年2月26日 月曜日 午後3時56分 Registering and Restoring a Setup (Registration) Registering a Setup Registration Setting Items Setting items that can be registered are shown below.
CTX5000_3000_EN.book 69 ページ 2018年2月26日 月曜日 午後3時56分 Registering and Restoring a Setup (Registration) Recalling a Registered Setup To recall a setup 1. As required, press cn FREEZE to toggle the freeze function between on and off. • The indicator lamp is lit when the function is on, and unlit when it is off. • For details about the freeze function, see “Freeze Function” below. 2. Use co BANK to select the bank that contains the setup you want to recall. Bank number 3.
CTX5000_3000_EN.book 70 ページ 2018年2月26日 月曜日 午後3時56分 Registering and Restoring a Setup (Registration) Using a Pedal to Cycle Through Multiple Setups (Registration Sequence) Each press of the pedal cycles through the currently selected bank’s registrations (setups) in area number sequence. To play with a Registration Sequence 1. Press bk FUNCTION. 2. Use the [1] (V) and [3] (W) bm number keys to display “Reg Mem” (Registration Memory), and then press [6] (ENTER). 3.
CTX5000_3000_EN.book 71 ページ 2018年2月26日 月曜日 午後3時56分 Editing a Tone (User Tones) You can edit a built-in tone to create a user tone, and save up to 100 user tones for later recall. ■ Saving to an External Device User tones can be saved to a USB flash drive or a computer. For details, see “To save Digital Keyboard data to a USB flash drive” (page EN-121) and “Transferring Data Between the Digital Keyboard and a Computer” (page EN-125). Creating a User Tone To edit a tone 1.
CTX5000_3000_EN.book 72 ページ 2018年2月26日 月曜日 午後3時56分 Editing a Tone (User Tones) To use DSP editing to edit an effect • If you are saving the data as a new user tone, the save destination tone number will be the lowest one in memory that currently does not have any data stored. The newly saved user tone will be selected after this operation is complete. Tone number 1. Perform steps 1 and 2 under “To edit a tone” (page EN-71). 2.
CTX5000_3000_EN.book 73 ページ 2018年2月26日 月曜日 午後3時56分 Editing a Tone (User Tones) 13.Perform step 6 and 7 under “To edit a tone” (page EN-71). To rename a user tone 1. Select the user tone you want to rename. 2. Hold down 8 RECORD/STOP until “ToneName” appears. 3. Press the [6] (ENTER) bm number key. This displays the renaming screen. 4. Input the new name. • See “Text Character Input” (page EN-15) for information about how to enter text. 5. Press [6] (ENTER). To delete a user tone 1.
CTX5000_3000_EN.book 74 ページ 2018年2月26日 月曜日 午後3時56分 Editing a Tone (User Tones) Tone Editing Item List Item Name Attack Time Display Atk.Time Description Settings Adjusts the time after a key is pressed from when the note starts to sound until it reaches maximum volume. A larger value specifies a slower attack. 0 to 127 Volume Note ends Time A R Key pressed Key released A : Attack time R : Release time Release Time Rel.Time Adjusts how long notes linger after keyboard keys are released.
CTX5000_3000_EN.book 75 ページ 2018年2月26日 月曜日 午後3時56分 Editing a Tone (User Tones) Item Name Display Description Settings Velocity Sense Vel.Sens Specifies how much the tone and/or volume should be affected by keyboard touch (pressure). A larger positive value specifies more brightness and greater volume as keyboard touch becomes stronger. A larger negative value specifies more softness and less volume as keyboard touch becomes stronger.
CTX5000_3000_EN.book 76 ページ 2018年2月26日 月曜日 午後3時56分 Creating a User Rhythm Creating an Auto Accompaniment (User Rhythm) ● Creating an Accompaniment with All New Parts You can record each part of an accompaniment pattern, if you want. Rhythm Configurations The structure of each rhythm is as shown below.
CTX5000_3000_EN.book 77 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) Creating and Editing a User Rhythm • For information about the mixer part indicator numbers and the part of each accompaniment pattern in the procedure below, see “RHYTHM Part Group” under “List of Parts for Each Mixer Part Group” (page EN-65).
CTX5000_3000_EN.book 78 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) 5. Select the part to be edited. (1) Press 9 PART and confirm that the lamp to the left of the button is lit. (2) Use the bm number keys [1] through [8] to select the part to be edited. To select this part: Press this number key: Percussion [1] Drums [2] Bass [3] Chord 1 to Chord 5 [4] to [8] • This displays the mixer part indicator that corresponds to the selected part to flash.
CTX5000_3000_EN.book 79 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) To edit an existing rhythm and save it • When editing the accompaniment pattern of an existing rhythm, you can perform new recording operations for each of the following parts: Variations 1 through 4 and Fill-ins 1 through 4. In the case of intro and ending, you need to first clear all parts and then record new parts.
CTX5000_3000_EN.book 80 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) 6. Configure the tone and octave shift settings of the part, if you want. (1) Select the tone you want to use for part recording. See “Selecting a Tone” (page EN-18). • Only drum set tones can be selected for Drums and Percussion parts. Drum set sounds cannot be selected for the bass and the Chord 1 through Chord 5 parts. (2) Configure the part’s octave shift setting.
CTX5000_3000_EN.book 81 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) To record keyboard play to each part • The operation shown here is performed as the steps of the procedures below. – Step 8 under “To create a totally new rhythm and save it” (page EN-77) – Step 8 under “To edit an existing rhythm and save it” (page EN-79) 1. Press 8 RECORD/STOP. Flashing This enters recording standby and displays “Recorded” or “Empty”.
CTX5000_3000_EN.book 82 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) 5. Timing in accordance with the “MEASURE” and “BEAT” values on the display, play something on the keyboard when required. • ek PITCH BEND wheel operations are also included in the recording. • dt MODULATION/ASSIGNABLE button operations are also included in the recording (CT-X5000 only). • What you record will play back when the display returns to the measure and beat where it was recorded.
CTX5000_3000_EN.book 83 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) To configure mixer settings of a part being edited To copy an existing accompaniment pattern for editing 1. In the Rhythm Editing Mode, select the copy • The operation shown here is performed as the steps of the procedures below.
CTX5000_3000_EN.book 84 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) To copy an existing rhythm part for editing • You cannot copy parts included in an intro or an ending. 1. In the Rhythm Editing Mode, select the copy destination part. • Perform steps 1 to 5 under “To create a totally new rhythm and save it” (page EN-77), or steps 1 to 5 under “To edit an existing rhythm and save it” (page EN-79). 2. Press cs REGISTRATION [1]. This displays “Element”. 3.
CTX5000_3000_EN.book 85 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) To batch clear the recorded data in all parts included in a single accompaniment pattern 1. In the Rhythm Editing Mode, select the accompaniment pattern whose parts you want to batch clear. • Perform steps 1 to 3 under “To edit an existing rhythm and save it” (page EN-79). 2. Press cs REGISTRATION [2]. This displays “Element”. 3. Press the [6] (ENTER) bm number key. This displays “Sure?” 4.
CTX5000_3000_EN.book 86 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) • If you are saving the data as a new user rhythm, the save destination rhythm number will be the lowest one in memory that currently does not have any data stored. The newly saved user rhythm will be selected after this operation is complete. Rhythm number Rhythm name No Nam e • If there is no data stored for a user rhythm number, “No Data” will be displayed for the rhythm name.
CTX5000_3000_EN.book 87 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) User Rhythm Part Playback Setting Details ■ Chord conversion table (Table) Recording of each accompaniment pattern is normally performed using C major (root of C, major type). When playing an Auto Accompaniment, you can use a root other than C and a chord type other than major, if you want.
CTX5000_3000_EN.book 88 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) ■ Break Point (Break Pt) This parameter specifies the key, from C to B, that is the point at which Auto Accompaniment bass and chord notes drop one octave.
CTX5000_3000_EN.book 89 ページ 2018年2月26日 月曜日 午後3時56分 Creating an Auto Accompaniment (User Rhythm) To batch clear data recorded in all the accompaniment patterns of a rhythm 1. Perform steps 1 and 2 under “To configure mixer settings for a rhythm” (page EN-88). 2. Use the [1] (V) and [3] (W) bm number keys to display “All Clear”, and then press [6] (ENTER). This displays “Sure?” 3. Press bn [+] (YES) to execute the batch clear operation or bn [–] (NO) to cancel. 4. Press the [4] (EXIT) bm number key.
CTX5000_3000_EN.book 90 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record ● System Track Records operations of the various different performance functions of the Digital Keyboard, including Auto Accompaniment, phrase pads, layer, split, etc. ● Solo Tracks 1 to 16 Record keyboard play using one tone (UPPER 1). These tracks can be overdubbed as shown below.
CTX5000_3000_EN.book 91 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Starting a Recording Recording can be stared from either of the modes below. When starting from the Song Bank Mode 1. Press 7 SONG BANK to enter the Song Bank Mode. ● Rhythm Mode Press 8 RECORD/STOP and then play something on the keyboard to start recording. This makes it quick and easy to start recording to the system track. 2.
CTX5000_3000_EN.book 92 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Recording Keyboard Play • The [RECORD] indicator will start to flash during recording when the number of remaining note count is 100 or lower. When there are no more remaining notes, recording stops automatically and the [RECORD] indicator disappears.
CTX5000_3000_EN.book 93 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To record a new solo track 1. Specify the tempo to use at the start of recording. • See “Changing Auto Accompaniment Speed (Tempo)” (page EN-46). 4. Select the solo track to which you want to record. (1) Long-press 8 RECORD/STOP. • This displays the recording setting screen that you can use to select the recording target track. Re c T r kSy 2. Select the tone you want to use at the start of recording.
CTX5000_3000_EN.book 94 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To overdub another solo track while playing back recorded tracks 1. Press 7 SONG BANK. 2. Use the bm number keys, bn [–] and [+], or the bl dial to select the number of the song you want to overdub. • Select a user recording song that has at least one track recorded. 3. Select the tone you want to use at the start of recording. (1) Press 5 TONE.
CTX5000_3000_EN.book 95 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To change the recording destination song number during recording standby 1. Press 8 RECORD/STOP. • If you started the operation from the Rhythm Mode, this enters recording standby. Advance to step 2. • If you started the operation from the Song Bank Mode, the Digital Keyboard will display the recording setting screen, so step 2 is not necessary. Proceed to step 3.
CTX5000_3000_EN.book 96 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Re-recording Part of a Recorded Track (Overdubbing, Punch-in Recording) The recording operations described in the table below can be performed on a recorded track. Overdub Recording Records by adding performance data to a recorded track, without deleting the previously recorded data. Punch-in Recording Used for re-recording of specific parts of a song to correct errors, etc.
CTX5000_3000_EN.book 97 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To specify the recording start point and end point, and then perform overdubbing or punch-in recording 1. Perform the procedure under “Looping Playback of Specific Song Measures (A-B Repeat)” (page EN-40). • When performing the procedure, select the number of the song that contains the track where you want to perform overdubbing or punch-in recording. 2.
CTX5000_3000_EN.book 98 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Copying a Recorded Song, Deleting a Recorded Song or Track To copy a recorded song 1. Press 7 SONG BANK. 2. Use the bm number keys, bn [–] and [+], or the bl dial to select the number of the song you want to copy. 3. Hold down 8 RECORD/STOP until “Song Clr” appears. 4. Use the [1] (V) and [3] (W) bm number keys to display “SongCopy”, and then press [6] (ENTER). 5.
CTX5000_3000_EN.book 99 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Song Editing Mode Enter the Song Editing Mode to perform the operations below.
CTX5000_3000_EN.book 100 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To copy an entire song in measure units and insert them into a specified location of the same song 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-99). 2. Press the [6] (ENTER) bm number key. This displays “Clear”. 3. Use the [1] (V) and [3] (W) bm number keys to display “Copy”, and then press [6] (ENTER). This displays “Point A”. 4.
CTX5000_3000_EN.book 101 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To delete a specific range of measures from a song • Performing this procedure deletes the measures in the specified range, shifting the measures following the deleted range forward to fill in the space that is created. The total number of measures in the song is reduced by the number of measures that are deleted. 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-99). 2.
CTX5000_3000_EN.book 102 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To copy a specified solo track to another solo track 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-99). 2. Use the [1] (V) and [3] (W) bm number keys to display “WholeTrk”, and then press [6] (ENTER). To delete specific data from a specified track • The operation below deletes only the data in the table below from the specified tracks.
CTX5000_3000_EN.book 103 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Editing a Track of a Recorded Song in Measure Units You can quantize, key shift, delete, or perform other operations in measure units for each track included in a recorded song. • Quantize automatically corrects the timing of notes recorded in a track to match a note value being used as the quantize reference (note event note on timing).
CTX5000_3000_EN.book 104 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To delete a specified track in measure units 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-99). 2. Use the [1] (V) and [3] (W) bm number keys to display “Trk Meas”, and then press [6] (ENTER). This displays “Quantize”. 3. Use the [1] (V) and [3] (W) keys to display “Clear”, and then press [6] (ENTER). This displays “Trk Sy” 4.
CTX5000_3000_EN.book 105 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Editing a Recorded Song in Event Units (Event Editor) The MIDI recorder records operations as data called “events”. For example, pressing a keyboard key causes multiple events to be recorded: the timing of the key press, the pressed key (pitch), press time (note length), and key pressure (note volume). Event editing can be used to edit the events below.
CTX5000_3000_EN.book 106 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record 4. Use the [2] (w) and [5] (q) bm number keys to Event Setting Ranges The ranges of the event settings are shown in the table below.
CTX5000_3000_EN.book 107 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record Y Tone Number Events (1) Use the [2] (w) and [5] (q) bm number keys to display “Tone” (Tone Number Event). (2) If you want to check the name of the tone assigned to the event, press bk FUNCTION. • This displays the tone name. If you want to leave the tone name displayed while changing the tone number, go to step (3). • Press bk FUNCTION again to return to the “Tone” display.
CTX5000_3000_EN.book 108 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record To delete events in measure units 1. Perform the procedure under “To enter the Song Editing Mode” (page EN-99). 2. Perform steps 2 and 3 under “To edit an event” (page EN-106). 3. Press cs REGISTRATION [8] (EDIT MENU). 4. Use the [1] (V) and [3] (W) bm number keys to display “Clear”, and then press [6] (ENTER). 5.
CTX5000_3000_EN.book 109 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record 5. When you are editing the system track, you 7. Specify the note value (event length) of the can specify the event input target part. event you are about to input in step 8. • See “Selecting a System Track Part” (page EN-110). • This step is not necessary when you are editing a solo track. Proceed to step 6. 6.
CTX5000_3000_EN.book 110 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record ■ Selecting a System Track Part When the system track is specified as the event edit target track, you can use the buttons below to select the part to be edited. You can find out the selection status of each part by checking for the indicators shown in the “Display” column of the table.
CTX5000_3000_EN.book 111 ページ 2018年2月26日 月曜日 午後3時56分 Using the MIDI Recorder to Record 11.To exit the Step Input Mode, press 5. Use the [2] (w) and [5] (q) bm number keys to cs REGISTRATION [1]. display the menu item you want to change. This causes the [STEP] indicator to disappear. • Initial default setting values are indicated by an asterisk (*). Recorded Song Mixer Settings You can configure the mixer settings of each part of the system track and the solo tracks of a recorded song.
CTX5000_3000_EN.book 112 ページ 2018年2月26日 月曜日 午後3時56分 Configuring Function Settings Use the procedures in this section to configure master Digital Keyboard settings. The procedure uses the bk FUNCTION button. • When power is turned off by pressing 1P (power) or by triggering of Auto Power Off (page EN-9) while Auto Resume (page EN-10) is turned off, all settings, except for those below, are returned to their initial defaults.
CTX5000_3000_EN.
CTX5000_3000_EN.
CTX5000_3000_EN.book 115 ページ 2018年2月26日 月曜日 午後3時56分 Configuring Function Settings Function Name Split Display Settings See Page Split – Split Point Split Pt 36 to 96 EN-20 Lower Point Lower Pt 36 to 96 EN-51 Chord Point Chord Pt 36 to 96 EN-51 Chord Input Priority Mode EN-20, 50 Cd Prior On, Off EN-52 Auto Accompaniment volume AcompVol 0 to 127 EN-45 Song volume Song Vol 0 to 127 EN-40 Tuning Tune – EN-37 EN-37 Master Digital Keyboard tuning MstrTune 415.5 to 465.
CTX5000_3000_EN.
CTX5000_3000_EN.
CTX5000_3000_EN.book 118 ページ 2018年2月26日 月曜日 午後3時56分 Configuring Function Settings Examination Mode The Examination Mode changes the operation of the Digital Keyboard as described below to provide support for those taking a musical instrument grade test. ● Accompaniment Pattern Operations • If the Digital Keyboard is in synchro start standby (page EN-48) while ACCOMP is off ([ACCOMP] indicator not displayed), rhythm will start when you play something anywhere on the keyboard.
CTX5000_3000_EN.book 119 ページ 2018年2月26日 月曜日 USB Flash Drive Your Digital Keyboard supports the use of a commercially available USB flash drive to perform the operations below.
CTX5000_3000_EN.book 120 ページ 2018年2月26日 月曜日 午後3時56分 USB Flash Drive To connect a USB flash drive to the Digital Keyboard 1. As shown in the illustration below, insert the USB flash drive into the Digital Keyboard’s USB flash drive port. • Carefully push the USB flash drive in as far as it will go. Do not use undue force when inserting the USB flash drive. USB flash drive port To format a USB flash drive 1. Insert the USB flash drive to be formatted into the Digital Keyboard’s USB flash drive port.
CTX5000_3000_EN.book 121 ページ 2018年2月26日 月曜日 午後3時56分 USB Flash Drive USB Flash Drive Operations You can use Digital Keyboard operations to perform data storage, data import, data delete, and data renaming operations for a USB flash drive plugged into the Digital Keyboard. These operations can be performed on the data listed below.
CTX5000_3000_EN.book 122 ページ 2018年2月26日 月曜日 午後3時56分 USB Flash Drive To load data from a USB flash drive to Digital Keyboard memory 1. Perform steps 1, 2, and 3 under “To save Digital Keyboard data to a USB flash drive” (page EN-121). 2. Use the [1] (V) and [3] (W) bm number keys to display “Load”, and then press [6] (ENTER). To delete USB flash drive data 1. Perform steps 1, 2, and 3 under “To save Digital Keyboard data to a USB flash drive” (page EN-121). 2.
CTX5000_3000_EN.book 123 ページ 2018年2月26日 月曜日 午後3時56分 USB Flash Drive To rename USB flash drive data 1. Perform steps 1, 2, and 3 under “To save Digital Keyboard data to a USB flash drive” (page EN-121). 2. Use the [1] (V) and [3] (W) bm number keys to display “Rename”, and then press [6] (ENTER). 3. Use the [1] (V) and [3] (W) keys to display a sub-menu of options that correspond to the type of data being renamed. • See “Sub Menu/File Name Extension List” (page EN-121). 4. Press [6] (ENTER).
CTX5000_3000_EN.book 124 ページ 2018年2月26日 月曜日 Connecting a Computer Connecting a Computer You can connect the Digital Keyboard to a computer and exchange MIDI data between them. You can send play data from the Digital Keyboard to music software running on your computer, or you can send MIDI data from your computer to the Digital Keyboard for playback. Minimum Computer System Requirements The following shows the minimum computer system requirements for sending and receiving MIDI data.
CTX5000_3000_EN.book 125 ページ 2018年2月26日 月曜日 午後3時56分 Connecting a Computer MIDI Settings Keyboard Channel This parameter specifies the channel to be used when keyboard performance information is sent from this Digital Keyboard to a computer. Perform the procedure under “To configure function settings with the bk FUNCTION button” (page EN-112) and configure the following setting: Keyboard Channel (Keybd Ch) (page EN-117).
CTX5000_3000_EN.book 126 ページ 2018年2月26日 月曜日 午後3時56分 Reference Troubleshooting Symptom Action Included Accessories I can’t find something that should be here. Carefully check inside all of the packing materials. Power Requirements Power will not turned on. • Check the AC adaptor (page EN-8). • CT-X3000: Make sure that the batteries are facing correctly (page EN-9). Replace the batteries with new ones (page EN-9) or switch over to AC adaptor power (page EN-8).
CTX5000_3000_EN.book 127 ページ 2018年2月26日 月曜日 午後3時56分 Reference Symptom Action Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being sounded exceeds the maximum polyphony value of 64 (32 for some tones). This does not indicate malfunction. The volume or tone setting I made has changed. • Adjust the volume setting (page EN-11) and the equalizer setting (page EN-25).
CTX5000_3000_EN.book 128 ページ 2018年2月26日 月曜日 午後3時56分 Reference Error Messages Display Cause Action Err Limit You are attempting to record more than 999 measures. Make your recordings up to 999 measures long. Err Mem Full You are attempting a recording that exceeds the allowable per-song limit. Keep song recordings with the allowable per-song limit. You are attempting a recording that exceeds the allowable per-phrase limit. Keep phrase recordings with the allowable per- phrase limit.
CTX5000_3000_EN.book 129 ページ 2018年2月26日 月曜日 午後3時56分 Reference Display Err WrongDat Err Format Cause Action The USB flash drive data is corrupted. – USB flash drive contains data that is not supported by this Digital Keyboard. – The USB flash drive format is not compatible with this Digital Keyboard. • Use a computer or other device to change the USB flash drive format to something that is compatible with the Digital Keyboard (page EN-120). • Use a different USB flash drive.
CTX5000_3000_EN.book 130 ページ 2018年2月26日 月曜日 午後3時56分 Reference Specifications Model CT-X5000 Keyboard 61 standard size keys Touch Response Maximum Polyphony CT-X3000 Sensitivity: 3 types, Off 64 notes (32 for certain tones) Tones Preset Tones 800 User Tones 100 (See “Tone Editing” item of these specifications.
CTX5000_3000_EN.
CTX5000_3000_EN.book 132 ページ 2018年2月26日 月曜日 午後3時56分 Reference DSP Effect List DSP Module List Module Number Module Name Display Description Mono 1-Band EQ Mono 1EQ This is a single-band monaural equalizer. Mono 2-Band EQ Mono 2EQ This is a dual-band monaural equalizer. Mono 3-Band EQ Mono 3EQ This is a three-band monaural equalizer. Stereo 1-Band EQ Streo1EQ This is a single-band stereo equalizer.
CTX5000_3000_EN.book 133 ページ 2018年2月26日 月曜日 午後3時56分 Reference DSP Parameter List Module Name Display Description Parameter Data Mono 1-Band EQ Settings This is a single-band monaural equalizer. EQ Freq EQ Frequency Adjusts the center frequency of Equalizer. *1 EQ Gain EQ Gain Adjusts the gain of Equalizer. –12 to 00 to 12 In Level Input Level Adjusts the input level. 000 to 127 WetLevel Wet Level Adjusts the level of the effect sound.
CTX5000_3000_EN.book 134 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Stereo 2-Band EQ Settings This is a dual-band stereo equalizer. EQ1 Freq EQ1 Frequency Adjusts the center frequency of Equalizer 1. *1 EQ1 Gain EQ1 Gain Adjusts the gain of Equalizer 1. –12 to 00 to 12 EQ2 Freq EQ2 Frequency Adjusts the center frequency of Equalizer 2. *1 EQ2 Gain EQ2 Gain Adjusts the gain of Equalizer 2.
CTX5000_3000_EN.book 135 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Tremolo Settings Shifts the volume of the input signal using an LFO. Rate LFO Rate Adjusts the LFO rate. 000 to 127 Depth LFO Depth Adjusts the LFO depth. 000 to 127 Waveform LFO Waveform Selects the LFO waveform. Sine, Triangle, Trapzoid WetLevel Wet Level Adjusts the level of the effect sound. 000 to 127 DryLevel Dry Level Adjusts the level of the direct sound.
CTX5000_3000_EN.book 136 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Limiter Settings Limits the input signal level so it does not rise above a preset level. Limit Limit Adjusts the volume level of the limit at which limiting is applied. 000 to 127 Attack Attack Adjusts the time until the compression effect starts. A smaller value causes prompt limiter operation, which suppresses the attack of the input signal.
CTX5000_3000_EN.book 137 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Chorus Settings Gives notes depth and breadth. Rate LFO Rate Adjusts the LFO rate. 000 to 127 Depth LFO Depth Adjusts the LFO depth. 000 to 127 Waveform LFO Waveform Selects the LFO waveform. Sine, Triangle Feedback Feedback Adjusts the strength of feedback –64 to 00 to 63 WetLevel Wet Level Adjusts the level of the effect sound.
CTX5000_3000_EN.book 138 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Drive Rotary Settings This is a rotary speaker simulator that makes overdrive possible. Type Type Selects the rotary speaker type. 0 to 3 OD Gain Overdrive Gain Adjusts overdrive gain. 000 to 127 OD Level Overdrive Level Adjusts the overdrive output level. 000 to 127 Speed Speed Switches the speed mode between fast and slow.
CTX5000_3000_EN.book 139 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Reflection Settings Simulates the initial reflection of reverberation. Applies acoustic presence to notes. WetLevel Wet Level Adjusts the level of the effect sound. 000 to 127 Feedback Feedback Adjusts the repeat of the reflected sound. 000 to 127 Tone Tone Adjusts the tone of the reflected sound. 000 to 127 In Level Input Level Adjusts the input level.
CTX5000_3000_EN.book 140 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data LFO Wah Settings This is a “wah” effect that can automatically affect the frequency using an LFO. In Level Input Level Adjusts the input level. The input signal can become distorted when the level of the sound being input, the number of chords, or the Resonance value is large. Adjust this parameter to eliminate such distortion.
CTX5000_3000_EN.book 141 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Modeling Wah Settings Simulates various types of wah pedals. This effect can automatically shift the frequency in accordance with the level of the input signal. OutLevel Level Adjusts the wah level. Type Type Selects the wah type. 1 2 CAE CRY 000 to 127 1 to 8 3 4 IBZ VO 5 6 FAT LIGHT 7 8 7STR RESO Manual Manual Adjusts the wah filter reference frequency.
CTX5000_3000_EN.book 142 ページ 2018年2月26日 月曜日 午後3時56分 Reference Module Name Display Description Parameter Data Drive Settings Simulates the drive of a musical instrument amplifier. Type Drive Type Selects the drive type.*4 1 to 20 Gain Gain Adjusts the driver input signal gain. 000 to 127 OutLevel Level Adjusts the drive output level. 000 to 127 WetLevel Wet Level Adjusts the level of the effect sound. 000 to 127 DryLevel Dry Level Adjusts the level of the direct sound.
CTX5000_3000_EN.
CTX5000_3000_EN.book 144 ページ 2018年2月26日 月曜日 午後3時56分 Reference Digital Keyboard Sound Source Configuration and MIDI Channel Assignment The sound source of the Digital Keyboard is divided among four part groups: KEYBOARD, RHYTHM, SONG SYSTEM, SONG SOLO. The roles assigned to each part of the part groups are a shown in the “Part” column of the table below.
CTX5000_3000_EN.book 145 ページ 2018年2月26日 月曜日 午後3時56分 Reference ■ External MIDI Device Operations by the Digital Keyboard • For the MIDI OUT channel of keyboard performance data output, the n-value specified by “Keyboard Channel” (page EN-125) is applied to the Upper 1 part. MIDI OUT channels for the following are based on the MIDI OUT channel of the Upper 1 part: Upper 2 = n+1, Lower 1 = n+2, Lower 2 = n+3, and Auto Harmonize = n+4.
CTX5000_3000_EN.book 146 ページ 2018年2月26日 月曜日 午後3時56分 Reference Operating Precautions Be sure to read and observe the following operating precautions. ■ Location Avoid the following locations for this product. • Areas exposed to direct sunlight and high humidity • Areas subjected to temperature extremes • Near a radio, TV, video deck, or tuner The above devices will not cause malfunction of the product, but interference from the product can cause audio or video interference of a nearby device.
CTX5000_3000_ES.book 1 ページ 2018年3月26日 月曜日 午後6時18分 Appendix/Apéndice Song List/Lista de canciones No./Nº Title/Título WORLD (CATEGORY : 01) 001 WHEN THE SAINTS GO MARCHING IN 002 AMAZING GRACE 003 HOME ON THE RANGE 004 SANTA LUCIA 005 WALTZING MATILDA 006 CAMPTOWN RACES PIANO/CLASSICS (CATEGORY : 02) 007 JE TE VEUX 008 SONATA op.13 “PATHÉTIQUE” 2nd Mov. 009 HABANERA FROM “CARMEN” 010 MINUET IN G MAJOR 011 ODE TO JOY 012 GYMNOPÉDIES no.
CTX5000_3000_ES.book 2 ページ 2018年3月26日 月曜日 午後6時18分 Appendix/Apéndice Fingering Guide/ Guía de digitación Cadd9 Cmadd9 FINGERED 1, FINGERED 2 Chords/ Acordes FINGERED 1, FINGERED 2 C69 *3 C Cm69 *3 Cm C7( 9) Cdim C7(9) Caug *3 C7(#9) C 5 C7(#11) Csus4 *3 C7( 13) Csus2 *3 C7(13) C7 Cm7(9) Cm7 *3 Cm7(11) *3 CM7 CM7(9) CmM7 CmM7(9) Cdim7 *3 C5 *4 CdimM7 C8 *5 C7 5 *3 Cm7 5 *3 CM7 5 Caug7 CaugM7 C7sus4 C6 *1 *3 Cm6 *2 *3 A-2 *1 *2 *3 *4 *5 With FINGERED 2, interpreted as Am7.
CTX5000_3000_ES.book 3 ページ 2018年3月26日 月曜日 午後6時18分 Appendix/Apéndice FINGERED ON BASS, FULL RANGE CHORD/ FINGERED ON BASS, FULL RANGE CHORD In addition to the chords that can be fingered with FINGERED 1 and FINGERED 2, the following chords also are recognized. Además de los acordes que se pueden digital con FINGERED 1 y FINGERED 2, también se pueden reconocer los siguientes acordes.
A-4 *1 (D#)/Eb E F # F /(Gb) G (G#)/Ab A • You can use the split point to change the size of the accompaniment keyboard range (page EN-20, 50). *1 Root *2 Chord Type • Puede usar el punto de división para cambiar el tamaño del rango del teclado de acompañamiento (página EN-20, 50).
CTX5000_3000_ES.
bo 1 cl cm bp bq br bs bt ck 2 eq 5 cn co cp 4 cr cq cs 8 67 bl dk do dp dq dr ct 9bk bn ds dl dm dn bm 火曜日 ek ep 3 2017年12月26日 dt eo 6 ページ en CT-X5000 • Cut this page along the dashed line so you can have it on hand as you read the contents of the manual. • Recorte esta página por la línea de puntos para tenerla a mano mientras continúa leyendo este manual. CTX5000_3000_ES.
午後6時32分 火曜日 2017年12月26日 7 ページ CTX5000_3000_ES.
Key’s Ch’s After Touch Control Change Pitch Bender Note ON Note OFF Velocity True voice 0 1 5 6, 38 7 10 11 64 65 66 67 71 72 73 74 76 X *4 X *4 * O CT-X5000: O, CT-X3000: X X O *2 O O O *3 O *3 O O *3 O *3 X *4 O X *4 O O O O O O O *2 O O O O O O O O O O O X O O 9nH v = 1 - 127 O 8nH v = 0 - 127, 9nH v = 0 O 9nH v = 1 - 127 O 8nH v = 0 - 127 X X 0 - 127 0 - 127 *1 Mode 3 X 12 - 120 Mode 3 X Default Messages Altered Mode 1 - 16 1 - 16 Filter cutoff Vibrato rate Bank select Modulati
0 1 5 6, 38 7 10 11 64 65 66 67 71 72 73 *2 *4 *4 *4 *4 Mode 1 : OMNI ON, POLY Mode 3 : OMNI OFF, POLY Mode 2 : OMNI ON, MONO Mode 4 : OMNI OFF, MONO Filter cutoff Vibrato rate Vibrato depth Vibrato delay Portamento Control Reverb send level Chorus send level Delay send level RPN LSB, MSB Bank select Modulation Portamento Time Data entry LSB, MSB Volume Pan Expression Hold 1 Portamento Switch Sostenuto Soft pedal Filter resonance Release time Attack time Remarks O : Yes X : No *1: Depende del tono.
CTX5000_3000_es_Cover1-4.fm 1 ページ 2018年2月15日 木曜日 午後4時59分 CT-X5000 CT-X3000 EN/ES USER’S GUIDE Please keep all information for future reference. Safety Precautions Before trying to use the Digital Keyboard, be sure to read the separate “Safety Precautions”. This recycle mark indicates that the packaging conforms to the environmental protection legislation in Germany. Esta marca de reciclaje indica que el empaquetado se ajusta a la legislación de protección ambiental en Alemania.