For ClassPad 300/ClassPad 300 PLUS ClassPad Add-In Installer User’s Guide http://world.casio.com/edu/ http://classpad.
ClassPad Add-In Installer The ClassPad Add-In Installer lets you install add-in software applications on your ClassPad. Add-in software applications let you add new functions and configure your ClassPad to your specific needs. Important! • Never disconnect the USB cable unless specifically instructed to do so. Doing so can cause the calculator to malfunction.
Contents 1. Installing the ClassPad Add-In Installer ......................................................... E-3 To install the ClassPad Add-In Installer .............................................................. E-3 2. Using the ClassPad Add-In Installer ............................................................... E-5 To use the ClassPad Add-In Installer ................................................................. E-5 To uninstall an add-in application ........................................
1 Installing the ClassPad Add-In Installer To install the ClassPad Add-In Installer 1. Double-click “setup” or “setup.exe”. 2. Click the [Next] button to advance to the next screen. 3. Carefully read the terms and conditions of the license agreement. 4. If you agree to the terms and conditions of the license agreement, click “I accept the terms…”, and then click the [Next] button.
1 Installing the ClassPad Add-In Installer 5. Perform either of the following two operations to specify the drive and folder where you want to install ClassPad Add-In Installer. • To use the default settings, simply click the [Next] button. • To specify a different folder, click the [Change...] button. Specify the folder you want, and then click the [Next] button. 6. Click [Install]. 7. Click [Finish].
2 Using the ClassPad Add-In Installer Add-in software applications let you add new functions and configure your ClassPad to your specific needs. The ClassPad Add-In Installer lets you install add-in software applications on your ClassPad. The steps you need to perform depend on whether you have the ClassPad’s “Wakeup Enable” feature turned on or off.
2 Using the ClassPad Add-In Installer 3. Double-click the “ClassPad Add-In Installer” icon. • Alternatively, you could also perform the following operation: [Start] – [Programs] – [CASIO] – [ClassPad Add-In] – [ClassPad Add-In Installer]. • Since your ClassPad is not connected to the computer yet, the message “ClassPad - Not connected” will appear in the left pane. 4. Use the USB cable that comes with your ClassPad to connect it to the computer. 5.
2 Using the ClassPad Add-In Installer b. Though a message appears to let you know that the software has not passed the “Windows Logo Test”, there is no need for concern. Simply click [Continue Anyway] and proceed with installation. c. Click [Finish]. 6. On your ClassPad, press the c key. 7. Tap [OK]. 8. Tap [Link], [Install], and then [Add-In].
2 Using the ClassPad Add-In Installer 9. Tap [OK]. 10. On the ClassPad Add-In Installer window, click . • After a connection is successfully established between your ClassPad and computer, the “ClassPad - Not connected” on the left pane will be replaced by the add-in applications that are currently installed on your ClassPad. 11. Click “Application” in the left pane. • This causes the add-in applications currently installed on your ClassPad to appear in the right pane.
2 Using the ClassPad Add-In Installer 15. On your ClassPad, tap [OK]. 16. Click [File] – [Exit]. 17. Disconnect the ClassPad from your computer.
2 Using the ClassPad Add-In Installer To uninstall an add-in application 1. Perform steps 1 through 11 of the procedure under “To use the ClassPad Add-In Installer” on page E-5. 2. On the list of add-in applications in the right pane, click the one you want to uninstall. 3. Click the icon. 4. Click [Yes]. • Clicking [No] cancels the delete operation. 5. Perform steps 13 through 17 of the procedure under “To use the ClassPad Add-In Installer” on pages E-8 to E-9.
3 Checking for Correct Add-In Installation 1. On your ClassPad, tap m to display the application menu. 2. Select “All” and confirm that the icon of the newly installed add-in appears on the display.
4 Installing Language Pack Add-In Software Installing the Language Pack add-in software adds other languages for the menus and help screens. The steps you need to perform depend on whether you have the ClassPad’s “Wakeup Enable” feature turned on or off. For information about “Wakeup Enable”, see “Configuring Communication Parameters” in the ClassPad 300 (page 15-3-1)/ClassPad 300 PLUS (page 16-3-1) User’s Guide. When “Wakeup Enable” is turned on Perform the following steps in sequence, from 1 through 15.
4 Installing Language Pack Add-In Software 3. Double-click the “ClassPad Add-In Installer” icon. • Alternatively, you could also perform the following operation: [Start] – [Programs] – [CASIO] – [ClassPad Add-In] – [ClassPad Add-In Installer]. • Since your ClassPad is not connected to the computer yet, the message “ClassPad - Not connected” will appear in the left pane. 4. Use the USB cable that comes with your ClassPad to connect it to the computer. 5.
4 Installing Language Pack Add-In Software b. Though a message appears to let you know that the software has not passed the “Windows Logo Test”, there is no need for concern. Simply click [Continue Anyway] and proceed with installation. c. Click [Finish]. 6. On your ClassPad, press the c key. 7. Tap [OK]. 8. Tap [Link], [Install], and then [Add-In].
4 Installing Language Pack Add-In Software 9. Select “Language” and then tap [OK]. 10. On the ClassPad Add-In Installer window, click [Add-In] and then [Language]. 11. Click the file you want to install, and then click [Open]. 12. Click [OK].
4 Installing Language Pack Add-In Software 13. On your ClassPad, tap [OK]. 14. Click [File] – [Exit]. 15. Disconnect the ClassPad from your computer.
CASIO COMPUTER CO., LTD.
