User manual - PX760_860_AP260_460_MIDI_E

8.16 Portamento Control (54H)
Format
Message Format: BnH 54H vvH
n: MIDI Channel Number
kk: Source Note Number
Send This message is not sent by this Instrument.
Receive Receipt of this message first stores the Source Note Number for the next note. When the
next Note On is received, the portamento effect is applied to the note using this Source Note Number as
the pitch start point and the Note On event key number as the end point. If there already is a note being
sounded by Source Note Number at this time, the new note on is not performed and the portamento
effect is applied to the pitch of the note being sounded. That is to say that legato play is performed.
8.17 High Resolution Velocity Prefix (58H)
Format
Message Format: BnH 58H vvH
n: MIDI Channel Number
vv: Value
Send Sends the lower seven bits of 14-bit Velocity when a key is pressed or released. (Note1)
Receive Receipt is handled, in combination with the following Note On/Off message, as the lower
seven bits of 14-bit Velocity. (Note1)
For information about the relationship between the Note On/Off message and High Resolution Ve-
locity Prefix message, see ”4.3 Instrument Velocity Resolution”.
Note1 : The PX-760,AP-260 do not supp ort Note Off Velocity. For these models, Velocity for send Note Off messages is
a fixed value (40H). Velocity for receive Note Off messages is ignored. The High Resolution Velocity Prefix message is not sent or
received for a Note Off message.
8.18 Reverb Send (5BH)
Format
Message Format: BnH 5BH vvH
n: MIDI Channel Number
vv: Value
Send This message is not sent by this Instrument.
Receive Receipt changes Reverb Send.
16