User manual
Operation Guide 3735
1
MA0508-EB
5
0
40
30
20
10
To set the time
1. When the second hand is at the 12 o’clock position, pull out the
crown to the second click. This will cause the second hand to stop.
2. Rotate the crown to set the hands to the current time.
3. Push the crown all the way back in to restart timekeeping.
• It is a good idea to restart timekeeping at the top of a minute,
according to a time signal on the radio, etc.
Setting the Date
Except for the month of February, this watch is designed to adjust
automatically for months of different lengths.
• This watch uses 30 days for the month of February. You need to
adjust the date manually at the end of February each year.
• At the end of a 30-day month, it may take until about 5:30 the next
morning before the month name changes to the following month.
To set the date
1. Pull out the crown to the first click.
2. Rotate the crown to change the date setting.
• Rotate the crown away from you to change the month setting.
• Rotate the crown towards you to change the day setting.
3. When the date is the way you want it, push the crown all the way
back in.
Elapsed time bezel
Crown
(Normal position)
First click
(Setting date)
Second click
(Setting time)
Day
Month
■ Avoid changing the date setting during the period from 17:00 to 5:00
the following day. During this period, the watch is performing an internal
process required for changing from one date to the next. Because of
this, the date setting may not change when you rotate the crown.
■ For watch with the elapsed time bezel
Rotate the elapsed time bezel to align the
mark with the minute hand.
After certain amount of time elapsed, read
the graduation on the elapsed time bezel
which the minute hand points to.
The elapsed time is indicated.
• Some water resistant models are equipped
with a screw lock crown.
• With such models, you must unscrew the
crown in the direction noted in the illustration
to loosen it before you can pull it out. Do not
pull too forcibly on such crowns.
• Also note that such watches are not water
resistant while their crowns are loosened.
Be sure to screw the crowns back in as far
as they will go after making any setting.
The configuration of your
watch may differ
somewhat from that
shown in the illustration.