Installation Guide

Bulb Type B

Max. 60W

(not included)

Rod

Green Grounding

Screw (E)

Mounting Screw (B) Wire Nut (C)

Mounting Strap (A) Threaded Pipe (D)

Hex Nut (F)

Finial (G)

Hardware Package(inculded):

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

W0251

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

161206

Back Plate

Finial (G)

Mounting Screw (B)

Fixture Wire

Threaded Pipe (D)

Mounting Strap (A)

Hex Nut (F)

Wire Nut (C)

Fixture Grounding Wire

Green Grounding Screw (E)

Outlet Box

House Grounding Wire

PAGE 1
W0251 ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS. Hardware Package(inculded): Mounting Strap (A) Mounting Screw (B) Wire Nut (C) Threaded Pipe (D) Green Grounding Screw (E) Hex Nut (F) Finial (G) Bulb Type B Max.
PAGE 2
Installation Steps Turn off the power at fuse or circuit box 1. Secure two rods into the couplings of the light. 2. Attach the threaded pipe to the mounting strap, and then secure it with a hex nut. 3. Attach the mounting strap to the outlet box by using two mounting screws. 4. Pull out the source wires from the outlet box. Make wire connections using wire nuts as follows: ---Connect the hot wire (usually black insulation) from the fixture to the black wire from the power source.