Installation Guide

ManualsBrandsCASAINC ManualsFarmhouse Kitchen SinksCeramic 33 in. Single Bowl Farmhouse Kitchen Sink

TOOLS AND MATERIALS:

Pencil

Read the following installation below.

Observe all local plumbing and building codes.

BEFORE INSTALLING

MATERIAL DESCRIPTION AND CARE

Thread Sealant

Tape Measure

FIRECLAY FARMHOUSE SINK INSTALLATION

Safety Glasses

Framing Square

Level

Hacksaw

Wood Shims

Drill

Basin Wrench

**Sealant - We recommend the use of a

stone, marble and granite silicone caulk

or a general purpose silicone sealant.

Fireclay is known for its strength and durability. Fireclay sinks

are made of clay that is ﬁred at a heat of over 2,000 degrees

Fahrenheit. This produces an ideal material that is resistant

to scratching, staining, fading and discoloring.

Use a soft, non-scratching sponge or cloth with mild soap

and warm water or a gentle all-purpose cleaner for everyday

cleaning. Wipe the surface dry with a clean, soft cloth after

each use. Use a non-abrasive liquid or cream bathroom

cleaner for tough stains.

To avoid scratching, do not use highly aggressive cleaners

such as scouring liquids and powders or drain cleaners. To

avoid potential stains or damages to the ﬁnish avoid soaking

dishes for long periods of time and do not leave coﬀee

grounds or teabags sitting in the sink.

installation.

ﬂoor, walls, plumbing or personal injury during

accepts no liability for any damages to the

ﬁxtures and plumbing. Signature Hardware

you are unfamiliar with installing kitchen

We recommend consulting a professional if

order to avoid personal injury.

Please use assistance when lifting the sink in

installed will ensure a custom ﬁt.

cabinet maker with the actual sink to be

cabinet maker for assistance. Providing the

recommend consulting an experienced

sinks may require custom cabinetry. We

will vary slightly dimensionally. Farmhouse

Due to the manufacturing process, each sink

not install.

pieces are missing. If you ﬁnd any damages, do

damages and ensure that none of the required

Unpack and inspect the sink for any shipping

INSTRUCTIONS

Summary of content (3 pages)

PAGE 1
FIRECLAY FARMHOUSE SINK INSTALLATION BEFORE INSTALLING TOOLS AND MATERIALS: Read the following installation below. Observe all local plumbing and building codes. Safety Glasses Framing Square Pencil Tape Measure Level Hacksaw Thread Sealant Wood Shims Basin Wrench INSTRUCTIONS Unpack and inspect the sink for any shipping damages and ensure that none of the required pieces are missing. If you ﬁnd any damages, do not install.
PAGE 2
FIRECLAY FARMHOUSE SINK INSTALLATION TEMPLATE AND CUTOUT No template is provided since each sink will vary dimensionally. After centering the sink, trace the outline of the sink on the counter-top with a pencil to use as a guide for the cutout. Remember to allow clearance for any faucets and/or backsplashes. Cut the counter-top accordingly. PREPARE THE CABINET Farmhouse sinks may require custom cabinetry. We recommend consulting an experienced cabinet maker for assistance.
PAGE 3
FIRECLAY FARMHOUSE SINK INSTALLATION FINAL PLACEMENT Test ﬁt the sink in the opening that was created in the previous steps. The entire weight of the sink should be supported by the support frame. Verify that the sink is in line and level with the top of the cabinet. Use shims, if needed, to level the sink. Set the sink and apply your sealant to ﬁll in any gaps below the sink front, and between the sink and counter-top. Hold the sink in place to secure.