OWNER’S MANUAL DANTE FLAT PANEL ELECTRIC FIREPLACE HEATER SKU- FSEFWTJ42AN Wall Mounted Using the wall bracket kit. Wall Mounted Option Free Standing Using foot bracket kit. WARNING Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. CAUTION Keep this owner’s manual in a safe place for future reference.
IMPORTANT SAFETY INSTRUCTIONS! WARNING • Read these instructions carefully before using this heater! • This heater is hot when the heat mode is in use. To avoid burns, DO NOT let bare skin touch hot surface. If provided, always use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater, and keep them away from the sides and rear.
WARNING • For residential use only! NOT for commercial use! Any commercial or public use of this heater voids all warranties , and could cause injury. • This product is not intended to be a primary heat source. It is for supplemental heat only. • INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! • Risk of electric shock! DO NOT REMOVE THE COVER! NO user-serviceable parts inside! • NEVER modify this heater. Doing so could result in personal injury or property damage.
PREPARATION This product includes GLASS! ALWAYS use extreme caution when handling NOTICE glass. Failure to do so could result in personal injury or property damage. Make sure all parts are dry, and the power cord and plug are not damaged. NOTICE See IMPORTANT SAFETY INFORMATION on pages 2 and 3. TOOLS NEEDED(NOT INCLUDED) Phillips Screwdriver Stud Finder Level Electric Drill 1/4" Wood Drill Bit Hammer Tape Measure PARTS AND HARDWARE 1.
INSTALLATION FOR WALL MOUNTING OPTION ALWAYS make sure the unit is unplugged before beginning assembly! NEVER move or clean the heater, or change the bulb, while it is plugged in. STEP 1: Find a suitbale safe location. Minimum clearance on each side: 20". Minimum clearance below: 20". (Wall mount only). Minimum clearance above: 39.5". Minimum clearance from the front: 36". Choose a location near an outlet so an extension cord is not required. DO NOT position the unit directly below a power outlet.
AVIOID INJURY and DAMAGE! Wood Screws(B) should be screwed directly NOTICE into wall studs when possible. STEP 4: Align the holes in the Wall Bracket(E) with the pilot holes and Drywall Anchors(C) . Thread three Wood Screws(B) and Metal Washers (J) through the holes in the wall bracket and directly into the wall studs and Drywall Anchors(C). Make sure the Wall Bracket(E) is level. Tighten all screws securely with a screwdriver.
ASSEMBLY FOR FREE STANDING OPTION WE RECOMMEND THAT TWO CAPABLE ADULTS PERFORM THIS NOTICE PROCEDURE. STEP 1: With the help of a capable adult, carefully lay the fireplace on a protected work surface on its back. Secure the Foot Bracket(H) to the bottom of the fireplace with two M6x16mm Bolts(I) . Tighten each screw securely with a screwdriver. Repeat Step 1 using remaining Foot Bracket(H) and two M6x16mm Bolts(I).
OPERATION Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in electric shock, fire, serious injury, or death. This heater is not intended to be a primary heat source. It is designed to provide NOTICE supplemental heat, and should not be left running to continuously for more than eight hours. POWER Make sure the ON/OFF switch, located on the left side panel, is in the OFF position.
CONTROL PANEL FUNCTIONS When this heat function is used for the first time, a slight odor may be present. NOTICE This is normal and should not occur again unless the heater is not used for an extended period of time. CONTROLS FUNCTION Flame Button Press once to turn flame ON. Press again to turn flame OFF. Flame +/- Press Flame (+/-) Button to desired flame brightness. 3 options. ONLY works when flame button is ON. Back Light Press Back Light Button to desired back light color.
REMOTE CONTROL FUNCTIONS MAIN POWER ON THE FIREPLACE CONTROL PANEL MUST BE IN THE NOTICE ON POSITION TO USE REMOTE CONTROL. DO NOT press the buttons too quickly. Give the unit time to respond to each NOTICE command. REMOTE CONTROL BUTTONS POWER ON/OFF HE ATER - LOW - HIGH - OFF TIMER Press the Heat Button once, 750W (LOW HEAT) heater turns on and the fan starts to blow warm air. Press the Heat Button again, 1,500W (HIGH HEAT) heater blows hot air. Press the Heat Button again,heater turns OFF.
REMOTE CONTROL BATTERY INFORMATION Fig. 1: Remove the plastic sheet from the end of the remote control to allow the battery to touch the electrical contacts. If the sheet is not removed, the remote control will not work. Fig. 2: To install or replace the battery, press the button to allow the battery case to slide out. Position the battery according the drawing, and slide the case back in to the remote Fig. 2 Fig.
TROUBLESHOOTING GUIDE PROBLEM SOLUTION There is no power to the unit. 1. Make sure the power cord is plugged into a working 120V AC electrical outlet. 2. Check for a tripped circuit breaker, or a blown fuse. 3. If the unit had been working, but then turned off by itself, the temperature limiting control must be reset. Please see instructions on Page 8 . The control panel doesn’t work. Make sure the ON/OFF switch on the control panel is turned on. The flame effect does not work.
CSA RATING LABEL & POWER CORD LABEL CSA Rating Label Power Cord Warning Label FAQ - FREQUENTLY ASKED QUESTIONS Question What is the best way to contact Customer Service? You can email us anytime at fsesales@taijicrafts.com. Can I leave the heater running overnight? No. This heater is not intended to be a primary heat source. It is designed to provide supplemental heat, and should not be left running continuously for more than eight hours. Is the fireplace safe to use on carpet? Yes.
LIMITED LIABILITY LIMITED LIABILITY This product is not intended to be used as a primary heat source. Read and understand all assembly and operating instructions, and all safety information and warnings before use. This product is not intended to be used as a primary heat source. Read and understand allinassembly safetyspecial, information and warnings before use.