WL100 User Manual HD Wi-Fi Camera with LED Light What’s in the box? WL100 Camera Power adaptor Mounting Hardware User manual
Camera Overview Getting Started 1. Go to App store or Google Play Store to download and install TuyaSmart on your smart phone, and register your account per instruction step by step from App.
2. Install and set up the camera a. Go to your phone WiFi Settings, and connect your phone to the router which you want to register WL100 to via 2.4G, do not connect the router through 5G b.
Live View: In camera list, Touch the icon , you can get multi camera view in one page. Touch each camera in the list, you can get single camera view. In single camera view --Touch this icon, you can activate audio or turn off audio. Touch this icon, you can change the live view resolution between HD and SD Touch this icon to get full screen live view.. Touch this icon to get a snapshot for the live view, store in your cell phone. Touch this icon to record current live view into your cell phone.
Touch the icon to go into playback page to playback today’s recording, you can slide the time bar to select recordings in different time—the grey partial are recordings. In playback page, 1. touch Calendar icon to select other date’s recordings. 2. Touch the record icon to record the playback video into your cell phone. 3. Touch the snapshot icon to get a snapshot doe what you see, store in your cell phone. Touch this icon in live view page to go into “Detection Alarm Settings” (explain later).
Settings In Live View, touch this icon to go into settings. Touch the device name “Wireless Spotlight Camera” you can change the icon, device name and location of your device. Device Information ( \Device Information) Touch this, you can check your account, IP Address, Device ID and Device Time Zone Tap-to Run and Automation NA for this camera. Third Party Supported ( \Third Party Supported) Touch Amazon Echo and Google Home to get instruction on how to connect your device to Amazon Echo and Google H
Alarm Sensitivity Level—Set Video motion detection sensitivity—High/Medium/Low Activity Area—Turn on/off the activity area, only turn on then you can set the following Surveillance Area Settings—Touch this to set the activity area, drag the corner to adjust the area, touch the center to move the area, once finalized, touch save. PIR ( \PIR) Touch this to set PIR (heat motion detection) sensitivity, High, Medium, Low and Off Pls note if both PIR and Motion Detection Alarm are on, the device will be in sma
Purchase VAS ( \Purchase VAS) Touch this to go into cloud recording service page, following the instruction to select service and pay for it, once you purchased could storage service, you will get 10 seconds recording for events and you can play back from your smartphone. Share Device ( \Share Device) Touch the “Add Sharing” to share your device to your family or friend, make sure your family member or friend already has a TuyaSmart account. Shared device can only have partial function.
Setup push notification In main page (right side), touch “Me” at bottom right, and then settings to go into “Notification Settings” You can get the following three different notifications, Alarm, Home and Bulletin, you can find all related notifications from Message Center Alarm, this is for camera related, like motion detected alert, offline notification; if this is on, you can set up “Do not Disturb Schedule” for specific device Home, This is for your account related, like you shared device to somebody el
How to change your account password. If you want to change your account password, in the device list, pls go to Me\Settings\Logout\Log in with Existing account\forgot password, input your account (e-mail address or cell phone No.), touch “Get Verification Code), after input the verification code, you can input your new password.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.