User's Manual

ManualsBrandsCasaCam ManualsElectronicsWireless monitor

USER MANUAL

5.5’’ Large Touchscreen Monitor with 1080p Pan & Tilt Camera

Model No. : CM544554

WARNING

STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of

crib or playpen. Never use extension cords with AC adapters. Only use the AC adapters provided.

• Some adult assembly or installation required.

• This product contains small parts that may cause choking. Keep small parts away from children.

• This product is NOT intended to replace proper supervision of children. You MUST check your child’s

activity regularly, as this product will not alert parents to silent activities of a child.

• Before using this product, read and follow all instructions and warnings contained in this booklet.

• NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet

basement, etc.

Summary of content (10 pages)

PAGE 1
USER MANUAL 5.5’’ Large Touchscreen Monitor with 1080p Pan & Tilt Camera Model No. : CM544554 WARNING STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC adapters. Only use the AC adapters provided. • Some adult assembly or installation required. • This product contains small parts that may cause choking. Keep small parts away from children.
PAGE 2
• This product is intended for indoor use only. • The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range, if may not be able to detect sounds from him or her. • Check reception regularly. Test monitor before use and after changing camera location. • Do not take apart the product by yourself.
PAGE 3
What's Included Product Overview Wireless Camera 1. 2. 3. 4. 5. 6. 7. 8. IR Sensor & LEDs: Infrared LEDs provide viewing in NO/LOW Light conditions. Microphone: Detects & transmits the sound from camera to monitor. Temperature Sensor: The measured ambient temperature is displayed on the monitor. Speaker: Enables the ability to talk from monitor/phone to camera and play lullabies. Antenna: Sends & receives signals to or from the monitor. DC 5V Power Input: Input for the power adapter, 5V 1A.
PAGE 4
Wireless Monitor 1. 2. 3. 4. 5. 6. Antenna: Sends & receives signals to or from the Camera. Sound Bar: Indicates the level of sound detected by the Camera. DC 5V Power Input: Input for the Power Adapter 5V 2A. Screen: 5.5” capacitive touch screen. Microphone: Detects & transmits the sound from Monitor to Camera. Power On/Off: Press and hold to switch the monitor on/off. Short press will change monitor to power save mode (VOX on) or audio only mode (VOX off) 7. Speaker: Produces the sound from the camera.
PAGE 5
3. To power on the monitor, press and hold the power button for 4~5 seconds. 4. To power on the camera, slide the on/off button to the ON position. Pairing the Monitor & Camera The units already come paired for your convenience. If you have additional camera, pair your camera as follow: 1. Power on wireless monitor and wireless camera. 2. Touch the live view screen on the monitor to make the settings icon appear. 3. Press the [ 4. Press [ ] button at the bottom left corner of the monitor.
PAGE 6
1. Signal indicator: If an ' ' appears on the signal bar, the system is "Out of Range". 2. Camera number: 3. Motion Recording enabled Indicator: , This icon indicates monitor is set to auto recording mode. 4. Network Connection Status: Monitor must be connected to the optional internet cradle(sold separately) for remote viewing. Green- Monitor is connected to the internet. White- Monitor is connected to router, but router is not connected to the internet. Red- Monitor is not connected to router. 5.
PAGE 7
18. SEQ: In quad or split mode, tapping this button will change channels in sequence and "SEQ" will appear. 19. Talk Back: Only appears in single camera Live View mode and when talk button is pressed&held. If a lullaby is playing, lullaby will be paused until the button is released. 20. Unlock the screen: , Tap this button to lock and unlock the touch screen. Operation Key “Operation” keys appear by tapping any blank location on the screen.
PAGE 8
Menu Page 1. Pair / Unpair Camera： 2. VOX: You can connect up to four cameras to your system. Set the VOX sensitivity to detect low or high sound levels. 3. Date & Time & Timer: 4. Language: Set system date&time, time zone and feed timer. Set language for the monitor from six options: English, German, French, Italian, Dutch and Spanish. 5.
PAGE 9
. Back: 10. Home: Save the settings and return to the previous page. Return to Live View. Specification Kit Operating Frequency Range 2.4GHz TX Power 17dBm (FHSS), 15+/-1dBm(Wi-Fi) RX Sensitivity -88dBm (FHSS), -89dBm(Wi-Fi) Type of Spread Spectrum Used Wi-Fi Type of Modulation Used 802.11b/g Antenna 2.4G 2.0dBi external antenna Communication Range 1000feet The transmission range of the wireless signal may weaken according to your environment.
PAGE 10
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.