Deluxe Full HD Series CM544554 5.5’’ Large Touchscreen Monitor with 1080p Pan & Tilt Camera QUICK START GUIDE WARNING! STRANGULATION HAZARD Children have accidentally become tangled in cords and been strangled. Please keep all cords out of the reach of children and use only the adapters provided.
What's included: Product Overview Wireless Camera 2
Wireless Monitor Getting Started Installing the Monitor & Camera 1. Pull out the isolation sticker on the back of the monitor. Fully charge the monitor using power adapter before first use. Camera must be plugged in at all times. 2. Place the camera in the preferred position. It can be placed on a table/cabinet or mounted on a wall using the mounting bracket (included). 3. To power on the monitor, press and hold the power button for 4~5 seconds. 4.
Indicator Description Live view 1. Signal indicator: 2. Camera number: If an ' ' appears on the signal bar, the system is "Out of Range". 3. Motion Recording enabled Indicator: mode. , This icon indicates monitor is set to auto recording 4. Network Connection Status: Monitor must be connected to the optional internet cradle [CRDL500] (sold separately) for remote viewing. Green- Monitor is connected to the internet. White- Monitor is connected to router, but router is not connected to the internet.
6. Recording Indicator: Icon flashes red when recording is in progress. 7. Remote Connection: This icon indicates remote connection to the system via App. 8. SD Card Overwrite: full. This icon indicates the SD card is allowed to overwrite files when it is 9. Vox on: 10. SD Card Indicator: Displays if an SD card is inserted into the monitor. If white, recording space is available. If red, the SD card is full. 11. 12. 13. 14. Zoom mode: Indicates Zoom mode: x1/x1.
1. Menu Setting: 2. Zoom In / Out: Supports x1, x1.5, x2 digital zoom ratio. 3. Manual record: Tap this button to record (icon will turn red) and tap again to stop recording. 4. Play back: 5. LED Light: 6. Lullaby: Tap this button to view recording file list. Tap this button to turn night light on camera on/off. Three pre-programmed lullabies. 7. Navigation Controls: Remotely Pan/Tilt the camera. How to use Audio Only Mode (Video Off) 1. Set VOX off (default setting): -> 2.
1. Out of Range: - Make sure the camera is connected securely to the power adapter. - Make sure the camera is paired with the monitor. - If still out of range, you can purchase a repeater (SKU#RE5) to extend the wireless range. *If the range signal issue is caused by the distance between the camera and monitor, flip up the monitor antenna will help improve the wireless range. *If adjusting the antenna doesn’t improve the signal, the repeater will help improve the wireless range.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.