USER MANUAL Wireless P/T HD Camera Model No.
WARNING STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided. • Some adult assembly or installation required. • This product contains small parts that may cause choking. Keep small parts away from children. • This product is NOT intended to replace proper supervision of children.
Features: ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ ⚫ 2.4 GHz FHSS + WiFi dual mode technology System expandable up to 4 cameras, single, split display or quad display Multiple (6) language selection Camera with night vision and sound trigger Lullaby and temperature display 2 way audio, monitor or cell phone can talk back to camera 5’’touch screen monitor Remote pan & tilt, digital zoom Free iOS & Android APP.
1. 2. 3. 4. 5. 6. 7. 8. 9. IR Sensor & LEDs: Infrared LEDs provide viewing in NO/LOW Light conditions. Microphone: Detects & transmits the sounds from camera to monitor. Temperature Sensor: The measured ambient temperature is displayed on the monitor. Speaker: Enables the ability to talk from monitor/phone to camera and play lullabies. Antenna: Sends & receives signals to or from the monitor. DC 5V Power Input: Input for the power adapter, 5V 1A. Power Slide Switch: Slide to turn on/off the camera.
. 6. 7. 8. 9. Microphone: Detects & transmits the sounds from Monitor to Camera. Power On/Off: Press and hold to switch the monitor on/off. Speaker: Produces the sound from the camera. Kick Stand: Enables the table stand for the monitor. Battery: Rechargeable lithium battery for portable use. Getting Started Installing the Monitor & Camera 1. Fully charge the monitor via power adapter or charging cradle before use. Camera must be plugged in at all time. 2. Place the camera in the preferred position.
the camera's current view. Indicator Description Live View 1. Signal indicator: Shows the strength of the signal being received from the camera. If an 'x' shows up on the signal bar, then the system is "out of range". 2. Digital Clock: Displays the time that is set on the monitor. 3. Camera number: Indicates which camera is being displayed on the current screen 4. Remote monitoring: Indicates remote monitoring status.
be in split mode (two displays). If there are more than two cameras paired, there will be four displays. Up to 4 cameras can be paired. You can’t listen to the audio from cameras in quad or split mode. 12. Talk Back: Press and hold this button if you want to talk to camera side, release to get monitor audio back.
1. Pair / Unpair Camera： 2. VOX: You can connect up to 4 cameras to your system. Set the VOX sensitivity to detect low or high sound levels. 3. Date & Time & Timer: 4. Language: Set up the system date & time & feed timer. Setting language for the monitor, six options: English, German, French, Italian, Netherlands and Spanish 5. Brightness: You can adjust the brightness of each individual camera. 6. Temperature: You can set Celsius or Fahrenheit, and set temperature alert high and low limit. 7.
3. Go to your phone settings\Wireless & Networks\WLAN, find the SSID(WiFi name) with the name xxxxx111A and connect to the SSID (no need to input password) 4.
phone anywhere. Notes: Turn on the 5” monitor, you will see a remote icon connected to the camera. on the screen when smart phone remotely You can take snapshot, check the snapshot files, turn on/off the volume and talk back under live view. You can also change Video Quality and Alert Interval from Edit Device\ADVANCED AP mode WiFi setup (iOS) 1.
2. After about 10 seconds, short push the reset button, the night light will change to slow flash. 3. Go to your phone settings\Wireless & Networks\WLAN, find the SSID(WiFi name) with the name xxxxx111A and connect to the SSID 4. Turn on SmartBabyCam App, press “+” to add device, scan the QR code at the bottom of the camera, input default password: 000000 and confirm, you will see online and touch the UID, it will remind you to change unsafe password.
You can take snapshot, check the snapshot files, turn on/off the volume and talk back under live view. You can also change Video Quality and Alert Interval from Edit Device\ADVANCED SETTING.
Specification Kit Operating Frequency Range 2.4GHz(Wi-Fi) 2.4GHz(FHSS) TX Power 17dBm(FHSS), 15+/-1dBm(Wi-Fi) RX Sensitivity -88dBm(FHSS), -89dBm(Wi-Fi) Type of Spread Spectrum Used FHSS, Wi-Fi Type of Modulation Used GFSK, 502.11g/n Data Rate 4Mbps(FHSS), WiFi(802.11b/g/n) Communication Range 300M The transmission range of the wireless signal may weaken according to your environment.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
