ATTACHMENT F.
TW-100 OWNER'S MANUAL 1
Federal Communications Commission Requirements Warning : Changes or modifications not expressly approved by the party responsible for compliance with the FCC’S rules could void the user's authority to operate the equipment. THIS DEVICE COMPLIES WITH PARTS 15 OF FCC RULES OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Content 1. Introduction - - - - - - - - Page 4 2. Features- - - - - - - - - - - - Page 5 3. Technical Specification - - - - Page 6 4. Front Side - - - - - - - - - Page 7 5. Charging Part - - - - - - - - Page 11 6. Installation & Connection (Print, Page 12 7. Method of Channel change - - - Page 12 8. Set Mode - - - - - - - - - - Page 13 9. Test Mode - - - - - - - - - Page 14 10.
1. Introduction Thanks for purchasing TW-100. This goods has held excellent performance and splendid properties through strike tests as well as devoting ourselves under severe quality management. Before using TW-100, It is recommended to read this manual carefully and to use TW-100 completely. Cautions Do not press the keys hard, for it will operate with soft touch. Do not use ignitable materials for cleaning. Avoid sudden temperature change. Keep it in a dry place.
2. FEATURES OF TW-100 (1) Features It is connected with CASTON(crane scale) by use of wireless communication. Simple operation. WATCHDOG circuitry (system restoration) Adapting high capacity rechargeable battery( DC7.2V, 720mA) (2) Main Function RS232C serial communication(standard) Connectable with serial print. Auto power off Manual/Auto hold, peak hold It is possible to set tare weight with keys Storing up to the 100th of weight, date and time, and printing total weight.
3. TECHNICAL SPECIFICATION Display LCD (5 digit) Size of letter 12 mm (Height) Display below zero Status lamp Power Power consumption Operation t t Frequency Channel Channel interval Generating power(comm.) Communication th d Comm. speed Comm. distance “-” displayed Zero, Tare, Gross, Net, Hold, Stable, Print TW-100 : Rechargeable DC Battery 7.2V 720mA Charger: AC220V/60Hz 0.5 W -10 to +40 903Mhz < 918.
4. FRONT DISPLAY VIEW (1) Display lamp Lamp: Weight is stable. ZERO Lamp: Current weight is 0 kg. GROSS Lamp: Current weight is GROSS. NET Lamp: Current weight is NET. TARE Lamp: TARE weight is stored. PRINT Lamp: On printing. HOLD Lamp: Lamp is on when weighing a moving object. Lamp: Charged to 80%~100%. Lamp: Charged to 50%~80%. Lamp: Charged to 0%~50%. Lamp: Discharged completely. It should be charged.
(2) KEYBOARD 0 7 8 9 4 5 6 1 2 3 Ι∆ : Printing the ϒ PRT list of weights Displayed on the screen like this "Print", on pressing PRT key. Print format NO 001 2000 kg ID:20 00.03.01 12:12:12 NO 002 1000 kg ID:16 00.03.01 12:22:12 NO 003 3000 kg ID:35 00.03.01 12:32:12 ------------------TOTAL : 6000 kg ϒ SET : When you setting a key tare value . It is used to enter the set-mode.
ϒ 0: It means the number "0" in the set-mode. * Return to 0(zero) weight ϒ 1: When you enter test-mode. It means the number "1" in the set-mode. ZERO ϒ 2: It is used to TARE key in the normal status. It means the number “2” in the set-mode TARE 3 HOLD ϒ ϒ : Hold the we It m 5 GROSS ϒ : Gross weigh It m 6 NET ϒ : When you wa It me 7 K . T ϒ : When you wa It me 4: Peak hold function in the normal status. P.
ϒ 9 : When you want to change the time. TIME It means the number “9” in the set-mode ! How to enter 9 TIME " NUMBER ϒ CLR : Used to correct a mistake. ϒ : Entering the product-id. ID ! How to enter ϒ ID ϒ ID NUMBER " "SET SET " SUM: storing the data of current weight, date, time and (caution) 1. store up to the 100th-ID 2.
5.RECHARGER 7 0 8 4 9 5 1 6 2 7 3 0 8 4 9 5 6 Insert a TW-100 to a charger and then plug-in as you can see in the picture. lamp : Power lamp(red) is on, when you plug in ≤ Power lamp : When TW-100 is charged completely, the ≤ Charger lamp color is changed from red to green ≤ Charging time : It takes about 1~2 hours, but It depends on discharging state.
6.Print & RS232 port connection ≤ Print & RS 232 port connection 1) Connect rs232 port of the charger to print. (RS 232port is located on the rear of the charger) 2) ND-T102,ND-192,YS-360S ΡΞ∆ Γ ΤΞ∆ Γ ΓΝ∆ Γ print Γ3 Τρανσµιτ ∆ατα Γ2 Ρεχειϖε ∆ατα Γ7 Σιγναλ Γρουνδ 9 pin port (Female) TW-100 charger RS-232C port Print port 7. Method to change channel € Open the case and separate RF Module PCB.
8. SET MODE (1) How to enter € Turn on the power with pressing the SET key It will be displayed on the screen like this "SET". (2) SET MENU Initialize the stored weights Fun tion Set value (00-01) LCD SCREEN F1-00 F1-01 " Setting Number key SET key : : Meaning Storing Initialize the weights change number.
9. TEST MODE (1) How to enter € Turn on power with pressing the "ZERO" key It will be displayed on the screen like this" TEST1".
TTEESSTT 33 : Function KEY Key test LCD SET key: to next menu the other key : test SCREEN tESt 3 DESCRIPTION Test 3 condition 1 Display the key number pressed < Key code > KEY CODE KEY CODE PRINT C0 SET A0 0 60 1 C1 2 A1 3 61 4 C2 5 A2 6 62 7 C3 8 A3 9 63 CLR C4 ID A4 SUM 64 KEY CODE TTEESSTT : Wireless (Transmit/Re eive) test KEY LCD SCREEN Function SET key: normal mode to tESt 4 ------ communication DESCRIPTION Test 4 condition Checking transmit/receiving
10 ERROR MESSAGE rFErr ≤ Reason for error When TW-100 can't communicate with CASTON in 5 seconds Treatment Turn off and then on. nO-dA ≤ Reason for error There is no data to print (When pressing PRINT key) LO-u ≤ Reason for error The weight is 0(zero)(When pressing SUM key) mEm-F ≤ Reason for error The number of stored data is over 100.