o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o OWNER’S MANUAL o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o CDP 1 CD Player 192 kHz / 24 Bit Digital to Analog Coverters HDCD Decoding Digital sample rates from 44.
CDP 1 CD PLAYER 768 512 384 192 96 POWER DISPLAY SAMPLE-RATE CONVERTER OPEN/CLOSE PLAY PREV. STOP CDP 1 HDCD , High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and /or other countries . HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following : Country Patent No.
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: To reduce the risk of electric shock, do not remove the cover.
IMPORTANT SAFETY INSTRUCTIONS 14. LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. 15.
IMPORTANT SAFETY INSTRUCTIONS 26. FCC INFORMATION FOR USER: CAUTION: ANY changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Front Panel 14 13 12 10 11 768 512 384 192 96 POWER DISPLAY SAMPLE-RATE CONVERTER OPEN/CLOSE PLAY PREV. STOP CDP 1 1 1 2 3 4 5 6 7 8 POWER button: * Press once to turn the power ON. * Press again to set to the "OFF" position and turn the power off. The player will enter into "Standby" and the blue LED will light. 2 DISPLAY button: * Use this button to switch the player display brightness levels. * There are 3 brightness levels, low, medium and high, plus OFF.
Front Panel 14 13 12 10 11 768 512 384 192 96 POWER DISPLAY SAMPLE-RATE CONVERTER OPEN/CLOSE PLAY PREV. STOP CDP 1 1 8 2 3 4 5 6 7 8 AUTOMATIC SEARCH REVERSE button: * Press this button to return the pickup to the beginning of the present track. * Press again to return to other tracks. 9 AUTOMATIC SEARCH FORWARD button: * Press this button to move the pickup forward to the beginning of the next track. * Press again to move ahead to other tracks.
Rear Panel 10 HDCD , High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and /or other countries . HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following : Country Patent No. United States 5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531 Australia 669114 Other patents pending.
Rear Panel 10 HDCD , High Definition Compatible Digital and Pacific Microsonics are either registered trademarks or trademarks of Pacific Microsonics, Inc. in the United States and /or other countries . HDCD system manufactured under license from Pacific Microsonics, Inc. This product is covered by one or more of the following : Country Patent No. United States 5,479,168 5,638,074 5,640,161 5,808,574 5,838,274 5,854,600 5,864,311 5,872,531 Australia 669114 Other patents pending.
Remote Control This button switches the power on and off. This button opens and closes the CD loading tray. SRC This button interrupts and resumes play. BRIGHT Start play. Playing a program. 1 2 3 REPEAT 4 5 6 DELETE 7 8 9 PROGRAM +10 0 CLEAN TIME Stops play. This button mutes the sound. Press again to resume sound. SRC - VOLUME + Select the sample-rate converter on or off, and cycle through sample-rate settings.
Remote Control BRIGHT Select the display brightness levels - low, medium, high, and OFF settings available. 1 Digit keys. SRC CLEAN Clears the last track number during programming. TUBE BRIGHT TIME Displays the remaining time of a track or it displays the total remaining time of a disc. 1 3 2 REPEAT VOLUME 4 5 6 DELETE 7 8 9 PROGRAM +10 0 CLEAN TIME - VOLUME Control the volume.
Specifications Operating the CDP 1 CD player is a simple procedure, since each unit is designed for long term stability in virtually any home operating situation. However, if the unit is operated outside the parameters outline in this owner's manual, damage may result. Please read this manual carefully before putting your new Cary Audio Design CDP 1 in operation. 1.1 Specifications The following section describes the CDP 1 CD player basic specifications.
Installation This section describes the unpacking and installation procedures for the CDP 1 player. WARNING MAKE NO ATTEMPT TO PUT THE CDP 1 CD PLAYER IN SERVICE WITH THE TOP COVER REMOVED. CONTACT WITH HIGH VOLTAGE INSIDE THE CDP1 CD PLAYER CAN BE FATAL! 2.1 Unpacking All Cary Audio Design shipping containers have been specifically designed to protect their contents and special care has been taken to prevent damage under normal shipping conditions.
Normal Playback 3.1 Starting Playback 768 512 384 192 96 POWER DISPLAY SAMPLE-RATE CONVERTER OPEN/CLOSE PLAY PREV. STOP CDP 1 1 1 3 2 4 Press the POWER button to turn on the power. 2 Press the OPEN/CLOSE button. * The disc holder opens. 3 Load the disc you want to play. 4 Press the PLAY button. * Playback starts. * Playback stops automatically after the last track on the disc has been played. 3.2 Stopping Playback 1 During playback, press the STOP button. * Playback stops.
Various Playback Functions 4.1 Playing a specific track (Remote control unit only) Use the number buttons and + 10 button to select the desired track. * Playback starts from the selected track. SRC BRIGHT 1 1 2 3 REPEAT 4 5 6 DELETE PROGRAM 7 8 9 +10 0 CLEAN - [Direct Play] TIME VOLUME + MUTE POWER AMPLIFIER USE ONLY INPUT SELECTOR < L BALANCED - VOLUME > R + 4.
Various Playback Functions 4.4 Finding the desired spot while listening to the sound (Remote Control unit only) 1 2 Use this function to skip forward or backward while listening to the sound. This function comes in handy for finding the desired spot in the middle of long tracks. SRC BRIGHT 1 2 3 4 5 6 DELETE 7 8 9 PROGRAM +10 0 CLEAN TIME - VOLUME REPEAT 1.During Playback, press and hold in the button. * When the button is released, normal playback resumes from that point.
Service and Care 5.1 CDP 1 Care and Cleaning The cabinet housing and front panel of the CDP 1 may be cleaned with a soft cloth and Windex or a mild window cleaner. The frequency of cleaning will be governed by the operating environment cleanliness. Do not use benzene, harsh or abrasive chemicals to clean the front or rear panel as they may remove or damage the labels. 5.2 Factory Service Careful consideration has been given to the design of you CDP 1 CD player to keep maintenance problems to a minimum.
UNITED STATES LIMITED WARRANTY Cary Audio Design warrants to the original United States purchaser for use in the United States that Cary Audio Design vacuum tube or solid state power amplifiers, surround sound processors or preamplifiers shall be free from defects in parts or workmanship for three (3) years from the date of the original purchase.
1020 Goodworth Drive, Apex, NC 27539 phone 919-355-0010 fax 919-355-0013 www.caryaudio.