PH 302 Vacuum Tube Phono Preamplifier Owner’s Manual NOTE: Before installing your new component, please read this manual carefully as it will inform you of the specifications, proper installation and operation procedures. Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product.
Contents ___________________________________________________________ Introduction.......................................................................................................................... 3 Specifications ....................................................................................................................... 4 Features.................................................................................................................................. 5 Installation ..............
INTRODUCTION____________________________________________________ It took over three years of painstaking research, engineering, listening, and refining, before Cary was ready to release the PH 302. But now that it's here, even the most demanding record enthusiasts will realize this exotic unit is dedicated to nothing short of incomparable vinyl playback. The PH 302 is a vacuum tube design utilizing four 6SL7 dual triodes.
SPECIFICATIONS ___________________________________________________ This section describes the basic specifications of the PH 302 phono preamplifier at the time of printing. Specifications are subject to change without notice or obligation. ........................................................................................................................................................................................................................ Circuit Type Direct Coupled, Single-ended Class A .....
FEATURES __________________________________________________________ Front Panel ........................................................................................................................................................................................................................ POWER SWITCH On/off toggle switch ....................................................................................................................................................................................
INSTALLATION _____________________________________________________ This section describes the unpacking and installation procedures for your new component. Unpacking All Cary Audio Design shipping containers have been specially designed to protect their contents and special care has been taken to prevent damage under normal shipping conditions. Mishandling should be evident upon inspection of the shipping container.
SERVICE AND CARE ________________________________________________ The chassis may be cleaned with a soft towel and Windex® (or a similar window cleaner). Spray it on the cleaning cloth to moisten it, not on the component. Do not use solvents or harsh chemicals as they may remove the labels from the chassis. The frequency and need of cleaning will be governed by operating environmental conditions. Avoid letting the component become dusty or wet.
UNITED STATES LIMITED WARRANTY ______________________________ Cary Audio Design warrants to the original United States purchaser for use in the United States, that Cary Audio Design vacuum tube or solid state power amplifiers, surround sound processors or preamplifiers shall be free from defects in parts or workmanship for three (3) years from the date of the original purchase.
foregoing constitutes Cary Audio Design’s entire obligation with respect to this product, and the original purchaser and any user or owner shall have no other claim for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives legal rights and you may also have other rights, which vary from state to state.
