User's Manual

AI-01.01

Adding controlserver to local network

Page 1 of 2

AG501

Controlserver

Adding controlserver to local network

A. Purpose

Adding the controlserver to a local network

B. Materials needed

1. Controlserver

2. LAN-cable

C. Step-by-step tutorial

1. Connect the controlserver to your local network via a LAN-cable

2. Right-click on the LAN-icon in the top right corner

1. In the drop-down menu select Edit connections

2. In the next window, select (a) System p2p1 and click on (b) Edit

Select the IPv4 Settings tab in the following window

(a)

)

PAGE 1
AI-01.01 Adding controlserver to local network Page 1 of 2 AG501 Controlserver Adding controlserver to local network A. Purpose Adding the controlserver to a local network B. Materials needed 1. Controlserver 2. LAN-cable C. Step-by-step tutorial 1. Connect the controlserver to your local network via a LAN-cable 2. Right-click on the LAN-icon in the top right corner 1. In the drop-down menu select Edit connections 2.
PAGE 2
Adding controlserver to local network (AI-01.01) Page 2 of 2 3. Set (a) method to (b) manual and add a valid IP-address in (c) the field below (a) (b) (c) 4. Click Apply at the bottom and confirm with the root password 5.