User's Manual

ManualsBrandsCarstens Medizinelektronik ManualsElectronics3D Electromagnetic Articulograph

AI-02.02 component description

Sybox Opto-4 Manual

Page 1 of 7

Revision: 2

Released

date: February 17

, 2014

date:

by:

I. Content

I. Content .......................................................................................................................................1

II. Sybox Opto-4 the Articulograph AG501 synchronisation platform ................................................2

A. Sybox Function .......................................................................................................................2

1. Synchronizing other systems with the Articulograph AG501 .................................................2

2. Direct access to the low level system signals .......................................................................2

3. Signal functions ...................................................................................................................2

4. Signal properties..................................................................................................................3

B. Installation ...............................................................................................................................4

Details for connecting your computer or your system ...................................................................4

C. Extensions ..............................................................................................................................6

III. Revision history ...........................................................................................................................7

Summary of content (7 pages)

PAGE 1
AI-02.02 component description Sybox Opto-4 Manual Page 1 of 7 I. Content I. II. Content .......................................................................................................................................1 Sybox Opto-4 the Articulograph AG501 synchronisation platform ................................................2 A. Sybox Function .......................................................................................................................2 1.
PAGE 2
Sybox manual (AI-02.02) Page 2 of 7 II. Sybox Opto-4 the Articulograph AG501 synchronization platform A. Sybox Function 1. Synchronizing other systems with the Articulograph AG501 With the Sybox-Opto4 there are status-, trigger- and pretrigger signals available to be used by other systems. It is possible to synchronize up to four other computer or systems with the speech movement recording. Fig. 1: Sybox-Opto4 front- and backside view 2. Direct access to the low level system signals 3.
PAGE 3
Sybox manual (AI-02.02) Page 3 of 7 Pre-Trigger signal “Attention” This signal has two functions: It goes active (LOW) exact 80ms before the sweep recording will start. This lets programs know in advance at what time the recording will start. At the same time when the Sweep signal get active, the Attention signal starts to change its level every 4ms until Sweep goes inactive.
PAGE 4
Sybox manual (AI-02.02) Page 4 of 7 B. Installation The twisted pair cable with the male DB15 connector comes out of the carrier. All signals are available at the four DB9 socket connectors Opto-J1 .. Opto-J4. Each connector offers all four signals. They all have the same pin assignments.  plug in the DB15 connector into the Sybox connector marked “TransPC”  connect one to four connectors from your electronic interfaces to the Opto-J1 ..
PAGE 5
Sybox manual (AI-02.
PAGE 6
Sybox manual (AI-02.02) Page 6 of 7 C. Extensions There are additional spaces to add electronic to combine with the Articulograph AG501 synchronization signals. This is for your information only. Please make sure that modification are only performed by qualified persons that can guarantee that all modification conform to all regulations. Fig. 6: Places for additional electronic     JPExtra1 .. JPExtra4 are connected to Extra1 ..
PAGE 7
Sybox manual (AI-02.02) Page 7 of 7 III.