Wireless Camcorder User Manual
Names of Parts Record Button Mic Status Indicator Micro SD Card Slot Speaker Micro USB Port Strap Hook Video Mode Photo Mode Mode Button Direct Mode Cloud Mode Power Button Tripod Mount Clip Mount Magnet Mount Strap Mount English | 1
Getting Started Charging the Unit • Before initial use, fully charge the camera via power adapter or USB to computer system. • During charging, the status indicator flashes in red. When the camera is fully charged, the indicator turns off. Modes Navigation • Press Power button to turn on the camera. • Press Mode button to switch among Video-Direct Mode, PhotoDirect Mode, and Cloud Mode. Camera Modes Insert micro SD card (sold separately). Video Mode • Press Mode button to select Video Mode.
Direct Mode (Intran Direct Mode (Local) For initial use, install [ApoEye] app on mobile. Each camera has a unique Mobile / PC U2-xxxxxxxx) Camera ID. ( Password is not required for the initial use, however, it is advised to go to [Setup] in app to setup password after connected. Connect to Camera For iOS user: • Set camera to Direct Mode . • On mobile, go to [Settings] [Wi-Fi] Choose a camera. 3G connection will switch to WiFi within 1 min. • Run [ApoEye]. • Press camera bar to start.
Cloud Mode (Internet) Cloud Mode (Internet) AP USTREAM Cloud AP Cloud Server 3G/4G Mobile / PC AP Mobile Hotspot Recommended Cloud Server for Access: USTREAM A live broadcasting social media. Before using Cloud Mode, setting up cloud AP and cloud server on camera are required. Step 1: Setup Cloud AP in Direct Mode On mobile, go to app [Setup] [Cloud Settings] [Cloud AP]. Select a WiFi network from [AP List]; enter network password when prompted. If no preferred AP is found, press [Other...
Cloud Mode (Internet) Step 3: Connect Camera to Cloud Server Options to connect to cloud server: 1. On mobile, press [Camera to Cloud] in [Setup] page. 2. On camera, set to Cloud Mode . While connecting, the status indicator flashes rapidly in orange. Once connected, the status indicator flashes in green. If connection fails, the status indicator flashes in red and alerts in different beeping frequencies. Alert Cause/Solution One time Cannot connect to cloud AP or invalid network password.
PC Applications To use [ApoEye] features on PC, install [PC APP] first. The [PC APP] has similar features and interface to [ApoEye] for easy user experience. Installing [PC APP] from Camera • Connect the camera to PC via a USB cable. • [PC APP] AutoRun/AutoPlay activates. • If AutoRun/AutoPlay is not starting: Go to [My computer] and search [PC APP] for installation. • Once installed, unplug the camera from PC then run [PC APP].
Camera Indication Condition Status Indicator Alert Recording Flashing green One time Loop Recording Flashing orange One time Charging Flashing red None Fully Charged No indication Two times Low Battery Flashing red every 5 sec. (Warning) Five times (Shutdown) Power Off No indication Two times Auto Power Off (5 mins idle) Flashing red Two times Memory Full SD Card Error Flashing red Three times Forced Shutdown Camera Hotkey Press and hold Power button for 5 sec.
Troubleshooting Situation Cause/Solution Camera cannot turn on Battery power is low. Recharge the battery. Camera is frozen Press Power button for 5 sec. to turn off. Press Power button twice to turn on. Camera cannot record No SD card or SD card is full. SD card cannot be recognized. Format SD card in [ApoEye] or replace SD card. Camera not found Turn on camera, switch to Direct Mode. Press "Refresh" on mobile or PC to scan again.
FCC Regulations § 15.19 (a)(3) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
NCC 警語第十二條: 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均 不得得擅自變更頻率、加大功率或變更通原計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干 擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通 信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通 信或工業、科學及醫療用電波輻射性電機設備之干擾。 WEEE Directive & Product Disposal At the end of its serviceable life, this product should not be treated as household or general waste. It should be handed over to the applicable collection point for the recycling of electrical and electronics equipment, or returned to the supplier for disposal.