User's Manual

ManualsBrandsCarrin Electronics ManualsElectronicsLCD Thermo Sensor

Applicant: Carrin Electronics Co., Ltd.

FCC ID: Q9E-91527

91186 WWVB (CAR021 +CAR014)

Features:

l Weather Forecast with Sunny, Slightly Cloudy, Cloudy, Rainy and Cloud Burst.

l Radio controlled time with manual setting option

l 433MHz RF receiving frequency.

l Maximum three selectable RF channels with wireless Thermo Sensor.

(One Wireless Thermo Sensor Included)

l Transmission range: 100 ft. ( open area ).

l Measuring range:

Indoor temperature : 32°F ~ 122°F (0°C ~ 50°C)

Outdoor temperature : -58°F ~ 158°F (-50°C ~ +70°C)

Indoor Humidity : 20% ~ 90%

l With 10 feet Corded Outdoor Temperature Probe.

l Outdoor Temperature Alert function.

l Max/Min Memory for Outdoor Temperature.

l Low-battery indicator for Outdoor Remote Sensor.

l Perpetual Calendar Up to Year 2069.

l 12/24Hour time display selectable.

l Wall mount or Table Stand Selectable.

l Battery:

Main Unit : DC 1.5 V AA size x 2 pcs

Thermo & Hygro Sensor Unit : DC 1.5 V AAA size x 2 pcs

l Size:

Main Unit : 166 x 95 x 25 mm

Thermo & Hygro Sensor Unit : 98 x 77 x 20 mmMain Unit Appearance

Caution: Changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

The users manual or instruction manual for an unintentional or unintentional radiator

shall caution the user that changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

Summary of content (8 pages)

PAGE 1
Applicant: Carrin Electronics Co., Ltd. FCC ID: Q9E-91527 91186 WWVB (CAR021 +CAR014) Features: l Weather Forecast with Sunny, Slightly Cloudy, Cloudy, Rainy and Cloud Burst. l Radio controlled time with manual setting option l 433MHz RF receiving frequency. l Maximum three selectable RF channels with wireless Thermo Sensor. (One Wireless Thermo Sensor Included) l Transmission range: 100 ft. ( open area ).
PAGE 2
Part A- LCD A1: Weather Forecast A3:. Outdoor Temperature A5: Outdoor Temperature Trend A7: Indoor Temperature A9: Calendar A2: Barometric Pressure Trend A4: Outdoor Humidity A6: Indoor Humidity A8: Moon Phase Display A10: Radio Controlled Time Part B- Buttons B1: “SNOOZE/LIGHT” button B3: ” ALARM ON/OFF” button B5: “WEATHER” button B2: “MAX/MIN” button.
PAGE 3
Thermo & Hygro Sensor Unit Appearance. D1: Outdoor Temperature D3: Transmission Indication LED D5: “°C/°F” button D7: “TX” button D9: Wall Mount Hole D2: Outdoor Humidity D4: Temperature Probe & Plug D6: Channel Selecting Switch D8: Battery Compartment. Set Up: Ÿ Insert batteries. Ÿ Use a pin to press the RESET (B11) button Radio Controlled Clock: l The clock automatically starts scanning the RF 433MHz signal to register new Thermo Sensor Unit after new batteries inserted.
PAGE 4
“ ” flashes indicate now is receiving WWVB time signal “ ” turns on indicate signal received successfully Manual Time Setting: l Hold “ MODE” button (B4) for 3 seconds to enter Clock/Calendar setting Mode when viewing the Time. l Press “+” (B8) or “-” (B9) buttons to adjust the setting and press “MODE” button (B4) to confirm each setting. l The setting sequence is shown as follow: Hour, Minutes, Second, Year, Month/Day sequence, Month, Day, DST on or off.
PAGE 5
Weather Forecast Function: l After Batteries inserted, or holding “WEATHER ” button (B5) for 3 seconds, weather icon Flash (LCD-A1). Enter the current weather by pressing “ “ buttons (B6). Press “WEATHER” button (B5) to confirm the setting. The weather forecast may not be accurate if the current weather entered is not correct. Totally 5 different weather in the weather forecast. l “ ” means Sunny . “ ” means Slightly Cloudy. “ ” means Cloudy. “ ” means Rainy “ ” means Cloudburst.
PAGE 6
Maximum/Minimum Outdoor Temperature and Humidity Recording Function: l Press “MAX/MIN” button (B2) to show the maximum recorded Outdoor Temperature and Humidity reading. l “ ” is shown on the LCD Press “MAX/MIN” button (B2) again to show the minimum recorded Outdoor Temperature and Outdoor Humidity reading. “ l ” is shown on the LCD. Hold “MAX/MIN” button (B2) for 3 seconds to clear the recorded maximum and minimum reading.
PAGE 7
Display the three channels alternatively l Hold “ CHANNEL” button (B10) for 3 seconds to cancel unused channel manually. It will automatically register a new channel again if a new channel is received. If there is no temperature and humidity displayed in existing channel ( “ - - . –“ is displayed on the LCD ), hold “CHANNEL” button (B10) for 3 seconds to cancel that channel and receive the channel again, a “BI” sound can be heard.
PAGE 8
CH3 temperature alert. Press “ALERT “button (B7) to confirm the setting. l Press “ +” (B8) or “-” (B9) button to set the upper ” ” and lower “ ” limit of the temperature. Press “ALERT “ button (B9) to confirm the setting. l Press “ ALERT” button to set the Temperature Alert function on or off ( “ ” appears on the LCD if this function is on).