User's Manual

ManualsBrandsCARRIN ELECTRONICS ManualsElectronicsWEATHER STATION

KW9025CC (no RCC)

Features:

z 433MHz RF receiving frequency.

z Maximum three selectable RF channels with wireless Thermo Sensor.

z Transmission range: 30 meters ( open area ).

z Measuring range:

Indoor temperature: 0°C ~ +50°C

Outdoor temperature: -20°C ~ +50°C

z Outdoor temperature alert function.

z Max/Min Memory for Indoor and Outdoor Temperature.

z Low-battery indicator for Outdoor Remote Sensor.

z Perpetual Calendar Up to Year 2069.

z 12/24 Hour time display selectable.

z Day of week in 7 Languages Selectable.

z Table Stand or Wall Mount Selectable.

z Battery:

Main Unit : DC 1.5 V AA size x 2 pcs

Thermo Sensor Unit : DC 1.5 V AAA size x 2 pcs

Summary of content (7 pages)

PAGE 1
KW9025CC (no RCC) Features: z z z z z z z z z z z z 433MHz RF receiving frequency. Maximum three selectable RF channels with wireless Thermo Sensor. Transmission range: 30 meters ( open area ). Measuring range: Indoor temperature: 0°C ~ +50°C Outdoor temperature: -20°C ~ +50°C Outdoor temperature alert function. Max/Min Memory for Indoor and Outdoor Temperature. Low-battery indicator for Outdoor Remote Sensor. Perpetual Calendar Up to Year 2069. 12/24 Hour time display selectable.
PAGE 2
Main Unit Appearance Part A- LCD A1: Thermo Sensor Channel A3: Real Time Display A2: Outdoor Temperature and Trend A4: Indoor Temperature Part B- Buttons B1:”ALERT” button B3: “CHANNEL” button B2: “MAX/MIN” button B4: “AL ON/OFF” button. B5: “ (12/24)“ button B7: “MODE/SET” button B6: “ (C/F)“ button B8:”RESET” button Part C- Structure C1: Wall Mounting Hole. C3: Stand C2: Battery Compartment.
PAGE 3
Thermo Sensor Unit Appearance. D1: Transmission Indication LED D3: Wall Mount Hole D5: Battery Compartment D2: Outdoor Temperature D4: Channel Selecting Switch D6: “°C/°F” button D7: “TX” button D8: Stand Set Up: y Insert batteries. y Use a pin to press the RESET (B8) button Outdoor Thermo Sensor Unit Registration Procedure: y The clock automatically starts receiving the RF 433MHz signal to register new z z z Thermo Sensor Unit after new batteries inserted, “- - .
PAGE 4
main unit to ensure the main unit can receive the channel. The main unit gives a “beep” sound if it received the temperature. Display outdoor temperature: z Press “CHANNEL” button (B3) to view the 3 Channels’ temperature. The sequence is shown as follow: Press Press “CHANNEL” button “CHANNEL” button Press “CHANNEL” button Display the three channels alternatively z Hold “CHANNEL” button (B3) for 3 seconds to cancel unused channel manually.
PAGE 5
z 7 languages can be selected in Day-of-week, they are: German, English, Denmark, Dutch, French, Italian and Spanish. The languages and their selected abbreviations for each day of the week are shown in the following table.
PAGE 6
Temperature Alert function: z Hold “ALERT” button (B1) for 3 seconds to enter Temperature Alert setting, Temperature’s digits flash. z Press “ ” (B5) or “ ” (B6) button to select Indoor or Outdoor CH1, CH2 and CH3 temperature alert. Press “ALERT “button (B1) to confirm the setting. z Press “ ” (B5) or “ ” (B6) button to set the upper “ ” and lower “ ” limit of the temperature. Press “ALERT “button (B1) to confirm the setting.
PAGE 7
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.