User's Manual

ManualsBrandsCARRIN ELECTRONICS ManualsElectronicsWireless Weather Station Receiver

User manual

KW5012

Features:

z Weather Forecast with Sunny, Slightly Cloudy, Rainy and Cloud Burst.

z 433MHz RF receiving frequency.

z Maximum three selectable RF channels with wireless Thermo Sensor.

(One Wireless Thermo Sensor Included)

z Transmission range: 30 meters ( open area ).

z Measuring range:

Indoor temperature : 0°C ~ +50°C

Humidity : 30% ~ 90%

Outdoor temperature : -20°C ~ +50°C

z Temperature Alert function.

z Max/Min Memory for Humidity, Indoor and Outdoor Temperature.

z Moon Phase Display.

z High Tide, Medium Tide and Low Tide Indication.

z Low-battery indicator for Outdoor Remote Sensor.

z Perpetual Calendar Up to Year 2069.

z 12/24Hour time display selectable.

z Day of week in 8 Languages Selectable.

z Wall Mount or Table Stand Selectable.

z Battery:

Main Unit : DC 1.5 V AA size x 2 pcs

Thermo Sensor Unit : DC 1.5 V AAA size x 2 pcs

z Size : 160 x 92 x 26 mm

Summary of content (8 pages)

PAGE 1
User manual KW5012 Features: z Weather Forecast with Sunny, Slightly Cloudy, Rainy and Cloud Burst. z 433MHz RF receiving frequency. z Maximum three selectable RF channels with wireless Thermo Sensor. (One Wireless Thermo Sensor Included) z Transmission range: 30 meters ( open area ). z Measuring range: Indoor temperature : 0°C ~ +50°C Humidity : 30% ~ 90% Outdoor temperature : -20°C ~ +50°C z Temperature Alert function. z z z z z z z z z z Max/Min Memory for Humidity, Indoor and Outdoor Temperature.
PAGE 2
Main Unit Appearance Part A- LCD A1: Weather Forecast A3: Indoor Temperature. A5: Moon Phase & Tide Indicator. A2: Outdoor Temperature A4: Indoor Humidity A6: Time Display Part B- Buttons B1: “SNOOZE/LIGHT” button B3: ”-(°C/°F)”button B2: “MODE” button. B4: “+(12/24)”& “HOLD Pa” button B5: “MAX/MIN” button B7: “ALARM ON/OFF” button B9: “RESET” button B6: “CHANNEL “ button B8: “ALERT” button Part C- Structure C1: Wall Mount Hole C3:.
PAGE 3
KW9010 Thermo Sensor Unit Appearance. D1: Transmission Indication LED D3: Wall Mount Hole D5: Battery Compartment D7: “TX” button D2: Outdoor Temperature D4: Channel Select Switch D6: °C/°F” button D8: Stand Manual Time Setting: z Hold “ MODE” button for 3 seconds to enter Clock/Calendar setting Mode . z Press “+” or “-” buttons to adjust the setting and press “MODE” button to confirm each setting.
PAGE 4
Denmark, DA Dutch, NE Italian, IT SO ZO DO MA MA LU TI DI MA ON WO ME TO DO GI FR VR VE LO ZA SA Spanish, ES DO LU MA MI JU VI SA French, FR DI LU MA ME JE VE SA The zone is used for the countries where can receive the DCF signal but the time zone is different from the German time. When the country time is faster than the German time for 1 hr, the zone should be set to 1. Then the clock will automatically set 1 hour faster from the signal time received.
PAGE 5
“ ” means Cloudy. “ ” means Rainy “ ” means Cloudburst. z If there is any inconsistency of weather forecast between Local Weather Station and this unit, the Local Weather Station's forecast should prevail. z The trend pointer displayed on the LCD indicates the trend of the Barometric pressure. “ ” indicates the barometric pressure trend is increasing. “ ” indicates the barometric pressure trend is steady. “ ” indicates the barometric pressure trend is decreasing.
PAGE 6
Thermometer: z Press “-(°C / °F)” button to select Indoor/Outdoor Temperature in Celsius mode/ Fahrenheit mode. Outdoor Thermo Sensor Unit Registration Procedure: z The weather station automatically starts receiving transmission from Outdoor Thermo Sensor for outdoor temperature after new batteries are inserted. z The sensor will automatically transmit temperature to the weather station after batteries inserted. Batteries compartment of thermo sensor is locating behind the back cover, unscrews to open.
PAGE 7
z “ ” indicates the outdoor temperature is decreasing. Press “ °C /°F” button, on the Thermo Sensor unit, to select Thermo Sensor displayed in Celsius mode or Fahrenheit mode. Temperature Alert function: z Hold “ ALERT” button for 3 seconds to enter Temperature Alert setting, Temperature’s digits flash. z Press “ +” or “-” button to select Indoor or Outdoor CH1, CH2 and CH3 temperature alert. Press “ALERT “button to confirm the setting.
PAGE 8
FCC Compliance Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC rule: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.