RV LEVEL WIZARD 1 Unscrew and remove the Level Wizard's Base Module battery cover and also the Remote Module battery cover. 2} install 3 AAA batteries in the Base Module (FIG. 2) and another 3 AAA batteries in the Remote Module {(F1G. 1). Note: Batteries are NOT included. 3) Put both battery covers back on and tighten the screws. 4) The RV Level Wizard is now ready to use. ; & FIG. 1 Note: We recommend installing hi-quality and fully charged alkaline batteries.
RV LEVEL WIZARD Carmine Level Wizard is a Wireless RV Leveling System that assists vou in leveling our RV by detecting precisely how much height is required to reach a level position and tells you where that height is needed.
RV LEVEL WIZARD You can use the RV Level Wizard as soon as you reach your destination. Simply place the Level Wizard Base Module on the floor in the middle of the RV (FIG. 5) and keep the Wireless Remote Module with you so that you can monitor when the RV is level (FIG. 6). As you start to level our RV (side-to-side and/or front-to-rear) using your existing leveling system, the Level Wizard will indicate which side of the RV needs to be raised to achieve a level position.
RV LEVEL WIZARD Designed to be accurate, the Level Wizard comes with a premium feature that will allow the Base Module to be set from STANDARD POSITION (FIG. 8) into EXTENDED POSITION (FIG. 10) by extending the Base Module legs, providing a fast and precise leveling.
RV LEVEL WIZARD Both Base Module and Remote Module have their own power buttons. To turn ON the Base Module, push and hold for 2 seconds the QN/OFF button situated on the back of the Base Module (FIG. 11). A short RED flashing light will confirm the Base Module is turned on. To turn ON the Remote Module, push and hold for 2 seconds the ON/OFF button situated on the front in the middies of the Remote Module (FIG. 12). A short RED flashing light will confirm the Remote Module is turned Of. FIG. 11 FIG.