User Manual

ManualsBrandsCaretaker Systems ManualsElectronics3-204-35

REMOTE CONTROLLER FUNCTIONS

The usefulness of the Prevent system is enhanced by the versatility of the Remote Controller.

The pool and the surrounding area are always available for supervised use.

The four modes described below allow a high degree of flexibility – while providing maximum

protection – without sacrificing the pleasure and enjoyment of owning a swimming pool.

Try each of the modes. Watch and listen for the indications listed on the right side of each box.

Reminder: Each click must occur within one second of the preceding click in order to register.

Also, there is a one second delay following the last click before the desired action takes place.

FALSE ALARM CANCEL MODE

llows the user to silence the alarm afte

clearing the obstruction from the beam

path. The alarm cannot be silenced If the

obstruction remains in the beam path.

• CANCELS a false alarm

• Immediately returns

the system

to FUN TION

L Mode

SWIM MODE

llows the user to break the laser beam

and enter and leave the pool area for a

30 minute period without sounding the

alarm.

• Lasers shut OFF

• Green indicator light

Transceiver FLASHES

• Alarm CHIRPS every 30

seconds

• System RESETS in 30

WALK THROUGH MODE

llows the user to break the laser beam

and enter the pool area without sounding

the alarm. Another single Click allows

the user to leave the pool area.

• Lasers shut OFF

• Green indicator light

Transceiver FLASHES

• Alarm CHIRPS every 3

SET-UP MODE

This maintenance mode allows the user

to align the Mirrors and Reflectors.

larm will not sound when in the Set-up

Mode. A single Click will reset the

system when adjustments are complet-

ed.

• Lasers are ON

• Alarm is SILENCED

• Green indicator light

Transceiver FLASHES

• Alarm CHIRPS every 2

Summary of content (3 pages)

PAGE 1
REMOTE CONTROLLER FUNCTIONS The usefulness of the Prevent system is enhanced by the versatility of the Remote Controller. The pool and the surrounding area are always available for supervised use. The four modes described below allow a high degree of flexibility – while providing maximum protection – without sacrificing the pleasure and enjoyment of owning a swimming pool. Try each of the modes. Watch and listen for the indications listed on the right side of each box.
PAGE 2
CHANGING THE REMOTE CONTROLLER CHANNEL, AND REPLACING THE BATTERY The Remote Controller provided with the Prevent system is capable of operating on four different channels. The factory setting is Channel 1. Occasionally, due to interference from other nearby radio frequency devices, it is necessary to change to a different channel. Proceed as shown below. ON 1 • Enter the Set-Up Mode by clicking the Remote 4 CLICKS. • Remove the cover from the Transceiver.
PAGE 3
PREVENT Limited Warranty The Prevent Area protection system is warranted against defects in material and workmanship, excluding batteries, for a period of one year from the date of purchase.