INTELLIDASH+ DU900 CONNECT IT! caranddriverdashcams.com support@CDDashcams.
ENGLISH Connect the INTELLIDASH+ to power supply 1. Connect one end of the supplied power cable to DC 12V power port of the INTELLIDASH+. 2. Plug the adapter end of the power cable into your car’s DC power outlet. Car’s DC power outlet The adapter end of the power cable If successfully connected to power supply, the LED indicator on the adapter end glows red, and the INTELLIDASH+ will automatically turn on and go to home screen.
2. Android Auto Supported Smartphones: Android 9.0 (or above) smartphone Before using the Android Auto, you should configure settings on the INTELLIDASH+. On home screen, tap Settings and to enter the settings, enable Phone Link and Android Auto Connect To Phone, then select Android Auto from the Link type. If your phone has a Micro USB port, connect the Micro USB cable to the USB port of the INTELLIDASH+ and the Micro USB port of your Android phone.
Connect the INTELLIDASH+ to your smartphone via Bluetooth With Bluetooth, you can listen to music or make calls without using Carplay® or Android Auto®. 1. Tap Bluetooth icon on the INTELLIDASH+ home screen to enter Bluetooth settings, then turn on Bluetooth for INTELLIDASH+. 2. Enable Bluetooth in your smart phone’s settings and search for “CarPlay-BT”, then tap “CarPlay-BT” to connect. If you are asked for a password, enter “0000”.
2. FM Transmitter 1. Turn on the FM Transmitter in the INTELLIDASH+. 2. Tune both your car radio and the INTELLIDASH+ to the same FM frequency (that is not currently being used.). Note: FM reception may change as your location changes. 3. Bluetooth If your car has built-in Bluetooth speaker, make sure both your car’speaker and your phones Bluetooth are turned on, and select your car’s speaker Bluetooth name in your phones settings to connect.
ESPAÑOL Conecte el INTELLIDASH+ a la fuente de alimentación 1. Conecte un extremo del cable de alimentación suministrado al puerto de alimentación de 12 V CC del INTELLIDASH+. 2. Enchufe el extremo del adaptador del cable de alimentación en la toma de corriente CC de su automóvil.
2. Android Auto Teléfonos inteligentes compatibles: teléfono inteligente Android 9.0 (o superior) Antes de usar Android Auto, debe configurar los ajustes en INTELLIDASH+. En la pantalla de inicio, toque Configuración y para ingresar la configuración, habilite Phone Link y Android Auto Connect To Phone, luego seleccione Android Auto en el tipo de Link. Si su teléfono tiene un puerto Micro USB, conecte el cable Micro USB al puerto USB del INTELLIDASH+ y al puerto Micro USB de su teléfono Android.
Conecte el INTELLIDASH+ a su teléfono inteligente a través de Bluetooth Con Bluetooth, puede escuchar música o hacer llamadas sin usar Carplay® o Android Auto®. 1. Toque el icono de Bluetooth en la pantalla de inicio de INTELLIDASH+ para ingresar a la configuración de Bluetooth, luego active Bluetooth para INTELLIDASH+. 2. Habilite Bluetooth en la configuración de su teléfono inteligente y busque “CarPlay-BT”, luego toque “CarPlay-BT” para conectarse. Si se le solicita una contraseña, introduzca “0000”.
2. Transmisor FM 1. Encienda el transmisor FM en el INTELLIDASH+. 2. Sintonice la radio de su automóvil y el INTELLIDASH+ en la misma frecuencia FM (que no se está utilizando actualmente). Nota: la recepción de FM puede cambiar a medida que cambia su ubicación. 3.