USE AND CARE MANUAL MAESTRO SERIES 30” WARMING DRAWER MODEL: MWD301ES
A SPECIAL MESSAGE TO CUSTOMERS Dear Valued Customer, Congratulations on making a smart choice! You have joined an elite group of cooking enthusiasts who demand only the very best from their appliances. A Capital Cooking appliance promises years of enjoyment and maximum performance, allowing cooks everywhere to create culinary memories that last a lifetime. Because of the unique features found in our appliances, we urge you to read this manual thoroughly before installation and use.
TABLE OF CONTENTS A SPECIAL MESSAGE TO CUSTOMERS ............................................................................................................... 1 TABLE OF CONTENTS............................................................................................................................................. 2 WARNINGS AND GENERAL SAFETY ..................................................................................................................... 3 WARMING DRAWER CONTROL FUNCTIONS .......
WARNINGS AND GENERAL SAFETY WARNING Do not install or use this product near water or outdoors, for example, near a kitchen sink, in a wet basement or near a swimming pool. GENERAL SAFETY PRECAUTIONS: To reduce the risk of fire, electric shock, serious injury or death when using your appliance, follow basic safety precautions, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Read the provided use and care manual before operating this appliance.
WARMING DRAWER CONTROL FUNCTIONS SET Button: The SET button is used for three main functions: 1) Activates Warming Drawer 2) Activates Warming Drawer Temperature Set selection mode. 3) Activates Warming Drawer Timer Set selection mode. UP Button: DOWN Button: Used to increase Temperature or Timer settings when the mode is active. Used to decrease Temperature or Timer settings when the mode is active. WARMING DRAWER LEGEND 1. Warming Drawer Control 2. Set Button 3. Up Button 4. Down Button 5.
WARMING DRAWER FEATURES DEFINED 1. Control SET Button: a. The SET button activates the Warming Drawer and activates the Temperature set mode when pressed once if it is in and Idle (Off) state, when pressed a second time the SET button activates the Timer set mode, when pressed a third time the SET button turns the Warming Drawer OFF. 2. Control UP Button a. The UP button is used to increase the Temperature or Timer setting. b.
USE OF YOUR WARMING DRAWER INITIAL WARMING DRAWER SETUP WARNING: Verify that the Warming Drawer is secured to the cabinet via screws in the front face plate to prevent tipping when the drawer is opened. WARMING DRAWER USE WARNING: Always use clean, dry pot holders when food is being placed into or removed from the warming drawer. WARNING: To prevent unnecessary odors, always clean large spills or food particles from the warming drawer prior to and after use.
SETTING THE WARMING DRAWER 1. Pressing the SET button when is the control is off will actuate the Temperature Set mode. 2. Pressing the SET button a second time when the control is active will actuate the Timer Set mode. 3. Pressing the SET button a third time will turn the Warming Drawer Timer to CONTINUOUS. This will turn the drawer ON until it is turned OFF by the user. 4. Four temperature settings are available and adjustable. The preset Temperatures are 110, 145, 170, and 200.
TIPS General • ALWAYS PRE-HEAT THE WARMING DRAWER. This will prevent excess condensation from forming inside the drawer while the drawer heats. • Always center your containers within the drawer from front to back and side to side to ensure even heating. • Open the warming drawer only when required to keep foods hot. Opening the door allows heat to escape and requires the warming drawer to recover. • Food continues to cook even after removing from the oven.
TROUBLESHOOTING Before calling for service, reference the following table for common problems that may enable self diagnosis or can resolve the problem: SYMPTOM POSSIBLE CAUSE Does not turn On or heat Drawer is not heating but control is On Drawer will not open Condensation build-up POSSIBLE SOLUTION Power is off Check breaker or GFI Wiring improperly connected Drawer is set to a low temperature Drawer safety device actuated Call electrician to properly connect wiring Check drawer temperature sett
WARRANTY • One (1) year full parts and labor, covers the entire unit. WILL PAY FOR: All repair labor and parts found to be defective due to material or workmanship for on (1) full year (from date of purchase) “in home” WARRANTY. This does not apply if the unit was subjected to other than normal household use. An Authorized Factory Agency must provide Service during normal working hours.
NOTES: -11-
THESE SPECIFICATIONS ARE FOR PLANNING PURPOSES ONLY. CONSULT WITH AN AUTHORIZED TECHNICIAN FOR YOUR SPECIFIC INSTALLATION DETAIL REQUIREMENTS. FOR THE MOST UP TO DATE INFORMATION, CONTACT CAPITAL COOKING EQUIPMENT, INC. INDICATING THE MODEL NUMBER. WE RESERVE THE RIGHT TO CHANGE THESE SPECIFICATIONS OR DESIGN WITHOUT NOTICE. THE POWER OF PERFORMANCE TM Capital Cooking Equipment, Inc. 13211 E. Florence Ave. Santa Fe Springs, CA 90670 USA 866.402.4600 Toll Free 562.903.1167 Fax MADE IN USA www.
