User's Manual

INSTALLTION INSTRUCTIONS MODEL: G7M
Learning Type Garage Door Opener
Table A
1.
Refer to the Table A to
select the brand of
garage door opener
2.
Hold both buttons at the same time for 5 seconds.
! You have 15 seconds to setup otherwise start
over again.
3.
Ensure the operating
frequency is correct based
on Table A. Otherwise you
should place the rotary
switch at a group that
transmits at the proper
frequency.
If you have any questions, problems or missing
parts, please call Skylink Customer Support
9:00AM – 5:00PM EST, Monday-Friday.
1-800-304-1187
or Email us at [e-mail]
www.skylinkhome.com
4.
Press the button you
want to use.
The LED will be off and
you have successfully
setup the G7M.
5.
Follow the instructions of your garage door opener
to program the model G7M to the garage door
opener.
6.
Press the desired button
you already setup to
operate the opener.