User's Manual
83
12.2.2 USB Dongle Parameters Setup
• From the Chrome browser, type in the NBX IP to open the NBX GUI.
• Go to CONFIGURATION > SYSTEM-CONFIG > IP-INTERFACES page.
• In the Current-Interfaces table, select the wwan0 interface and type in the Configuration fields type in the APN,
User, Password, and press Apply.
• Wait for the dongle (wwan0) to get an IP connection as seen in the below example.
Note that if it is a PPP connection, the interface name will display PPP. If the dongle is a HiLink type, the APN
information must be populated in the Dongle from a laptop and the Dongle will show up as ETH1 with an IP
address given by the Dongle’s DHCP server