User's Manual

51
6.5.1 IoT - Device Messages
Displaying the messages received and repeated by the unit (including associated DL messages).
All the relevant information for each unique message is displayed:
• Receive
o Dev-ID: Device ID (can search for specific device-ID’s)
o MSG Counter: Message counter (can search for specific MC’s)
o Type: UL, UL100 or DL (UL100 are UL messages at 100Hz Baud)
o TOD: Time of Day
o BF: Bi-directional or Uni-directional mode (ACK or not)
o REP: Repetition bit on (1) / off (0)
o Payload: payload data (can search for specific data) – available in Expert mode only
o Frame # : how many frames out of the 3 were received
o RF CHN : The strongest RSSI frame, RF channel (A or B)
o RSSI[dBm] : The strongest RSSI frame
o Freq.[kHz] : The strongest RSSI frame, frequency (relative to the central band).
• Repeat
o Status: the status of the repetition: Repeated, pending, …
o TOD: Time of Day of the transmitted
o Freq.: transmitted frequency (relative to the central band – N.B. it is different for both UL and DL).
o TX Channel – Which channel the message was repeated from
o Power[dBm] : Transmitted power
DL messages are placed below the associated UL message which triggered it.
Collect Messages– Enable/disable message collection mechanism.