User's Manual

6 Monitor & Configuration – Web Interface

In general, most configurations are done automatically without any user intervention.

Some of the settings described below are temporary for manual configuration or advanced settings.

There are three levels of user permissions: Super-User, Admin, User.

Possible methods for accessing the NBX R1000-RF are:

• Web (over IP).

• CLI (over IP).

• SNMP (over IP).

• IoT (Sigfox messages).

• Bluetooth (Using dedicated application).

This section will describe the web access mode.

It is recommended to use Chrome web-browser.

There are special commands and menus which are available only in expert mode and are not required for normal

operation of the unit.