User's Manual

5 Connectivity

5.1 Interfaces

• Waterproof Ethernet (RJ-45) - for power and IP communication

• RP-SMA x2 – for antennas

5.2 Power

The NBX uses passive PoE for supplying power. The power is provided by an AC/DC adapter through a passive PoE DC

injector (Pins 4,5 (+) and 7,8 (-)).

Supported voltage range: 10V to 48V DC.

Average R1000-RF power consumption - up to 5Watt (excluding USB modem).

5.3 IP Connectivity

IP connectivity is not mandatory.

The NBX R1000-RF repeater relies on RF communication to one or more BS for its functionality.

IP connectivity is mainly used for expert/technical management, control access and FW upgrades.

IP connectivity options:

• RJ-45

• Wi-Fi/BT

• USB dongle

See section 12.1 for initial setup guidelines.

5.3.1 USB Dongle

Following models are supported:

ETH

RP-SMA (B)

RP-SMA (A)